miniZv2.4d Equihash144,5 125,4 210,9 150,5 192,7 Beam ProgPoW Ethash CFX KLS PYI

[MineOrDie]

It's the same for me. Still 8+ LA on HiveOS.

[miniZ]

miniZ - On my 4-card rig with an i5 CPU, the CPU% went from about 40% down to 10% with the update.  It appears to be running fine.  But, as you can see from the log I posted, my 8-card rig with Celeron 3930 doesn't work well at all.  The CPU utilization appeared to be better (<100%), but not all cards were hashing, I think the CPU started to climb some, and then it crashed as you see in the log.

Hi DanGB,

We cannot reproduce you issue, but we guessed what it might be.

We have updated the windows cuda 10 file. Could you download and try again?

Sorry about this and thanks for the feedback.
Let us know how it goes.
Cheers

[miniZ]

It's the same for me. Still 8+ LA on HiveOS.

Hi MineOrDie,
are you using version 1.3n or v1.3n+?
Cheers

[miniZ]

Could you please add Beam mining pool Sunpool to your FAQ list of pools?

https://sunpool.top/

beam.sunpool.top:3333

Hi $@X,
Done!

Does this optimization work for the Beam algo? It seems to, but the FAQ say that it only works with 144.5 algo. Also, would there be any benefit to running this optimization along with an --oc optimization?

--f11 is ignored when mining Beam (at least for now), but --oc1 and --oc1 are used.

Thanks.
Cheers

[miniZ]

I have an error mining BEAM on win 8.1. (cuda 10, latest driver) The miner/system is waiting for key pressed and isn't continue.

Why sparkpool.com doesn't value your work, dev?

Dr_Victor,

Are you using the ssl prefix to tell miniZ that you want to enable ssl?
Also, did you wrote --pers auto? If you did, just remove that option (in the new v1.3n+ version this should be already ignored).

Command line like this should work:

Code:

miniZ.exe --url=ssl://YourWallet.Worker@beam-eu.sparkpool.com:2222 --log --extra

Let us know if this helped. If not, please paste here you command line.
Thanks!
Cheers

[miniZ]

1. Ok done it. As far as I know, Hive guys already added miniZ to their miners repo and I was told they'll make it public next week.
2. It happens every run. HiveOS, 418.43 drivers, beam 150,5 on the nicehash. The rest of miners I use (gminer/t-rex/ethminer) giving me LA 2-3, tops. Log and LA as follows:

At the top of the top (pun intended) are miniZ and kworker.

Hi 2h4u,

Thanks for the info! It is good to know
This has been fixed in the new miniZ version v1.3n+. 
You will need to update your flightsheet: https://miniz.ch/2019/04/26/hive-os-support-6/

Please check it out and let us know how it goes.
Cheers

[N0pr3s3n7]

Anyone else having trouble that miner is mining and working and its actually OFFLINE at pool (leafpool but yesturday same happened all night long i left my home pc with 1 gpu mining at f2pool and it miner only for 1-2 hours )? ..... I use HiveOS currently and 1 of the my rigs went offline at some point but it was working ....



also all extra parameters for Hive are ignored , if I add --oc1 miner doesnt even start at all . It just hangs at beginning and does nothing. Adding --show-shares etc etc --latency etc does nothing on hiveos . I tired one at line and all on one line , doesnt matter , miner is started without extra params





also please make an option to disable all the calls for nvml i guess and dont output any GPU info , we can see this info on main monitoring page..

[miniZ]

8x1070 load cpu g3930 at 100%. 2x1070 load at 1%. Beam 150,5. Win10.

Hi sergoh,
This has been fixed in the new miniZ version v1.3n+.
Please dowload again and let us know how it goes.
Thanks for the feedback!      
Cheers

[topteam]

Thanks!!!
Now work like a rock solid

[DanGB]

miniZ - I downloaded the newest update (I'll refer to it as v1.3n++).  It is running, but CPU still got up to 100%.  It took about 1 minute for all 8 cards to actually start working (see logs below) and by the time the last card was going, CPU was at 100%.  I will have to run it for a while to see if it stops sending shares to the pool or crashes.  Thanks

Celeron 3930 CPU
miniZ version: 1.3n++
Cuda version: 10.10
NVIDIA driver: 418.81
OK: Win10 x64

miniZ.exe --templimit=70 --url=ssl://0480437dc7c1c92f2e2b992b5b33cfb2483e9f827ca8eb5bcddd880a6feeb92e.D_E_1070Ti@beam.sunpool.top:3334 --par=150,5 --latency --shares-detail --all-shares --gpu-line --telemetry=0.0.0.0:0 --log

Number of CUDA devices found: 8
miniZ,150,5[1:0:00]: Selecting GPU#0[0] GeForce GTX 1070 Ti
miniZ,150,5[1:0:00]: Selecting GPU#1[1] GeForce GTX 1070 Ti
miniZ,150,5[1:0:00]: Selecting GPU#2[2] GeForce GTX 1070 Ti
miniZ,150,5[1:0:00]: Selecting GPU#3[3] GeForce GTX 1070 Ti
miniZ,150,5[1:0:00]: Selecting GPU#4[4] GeForce GTX 1070 Ti
miniZ,150,5[1:0:00]: Selecting GPU#5[5] GeForce GTX 1070 Ti
miniZ,150,5[1:0:00]: Selecting GPU#6[6] GeForce GTX 1070 Ti
miniZ,150,5[1:0:00]: Selecting GPU#7[7] GeForce GTX 1070 Ti
Algo:      EQ[150,5]
Pool#0:    user[0480437dc7c1c92f2e2b992b5b33cfb2483e9f827ca8eb5bcddd880a6feeb92e.D_E_1070Ti]
      server[beam.sunpool.top] port[3334] ssl[yes] pers[Beam-PoW]
Logging::    file[miniZ.log] period[10] delay[0]
Temp. limit:   [70øC]
[ 0d 0h 0m09s] 72(71.7)Sol/s 377(377.4)W- 128ms
 0>GTX 1070 Ti `S:  1/0 [46øC/52%]*12.15 I/s 21.4(21.4)Sol/s  65( 64.5)W clk=1771MHz mclk=3802MHz Sol/W=0.33
 1>GTX 1070 Ti `S:  0/0 [48øC/52%] 12.62 I/s 24.5(24.5)Sol/s 110(110.1)W clk=1708MHz mclk=3802MHz Sol/W=0.22
 2>GTX 1070 Ti `S:  0/0 [48øC/53%]  1.70 I/s  1.6( 1.6)Sol/s  30( 30.3)W clk=1607MHz mclk=4006MHz Sol/W=0.05
 3>GTX 1070 Ti `S:  0/0 [50øC/56%]  0.00 I/s  0.0( 0.0)Sol/s  30( 30.0)W clk=1607MHz mclk=3802MHz Sol/W=0.00
 4>GTX 1070 Ti `S:  0/0 [50øC/53%] 11.76 I/s 21.5(21.5)Sol/s 113(113.4)W clk=1670MHz mclk=3802MHz Sol/W=0.19
 5>GTX 1070 Ti `S:  0/0 [49øC/55%]  0.00 I/s  0.0( 0.0)Sol/s  29( 29.0)W clk=1607MHz mclk=3802MHz Sol/W=0.00
 6>GTX 1070 Ti `S:  0/0 [0øC/ 0%]  0.00 I/s  0.0( 0.0)Sol/s   0(  0.0)W clk=0MHz mclk=0MHz Sol/W=-nan(ind)
 7>GTX 1070 Ti `S:  0/0 [0øC/ 0%]  0.00 I/s  0.0( 0.0)Sol/s   0(  0.0)W clk=0MHz mclk=0MHz Sol/W=-nan(ind)
[ 0d 0h 0m19s] 100(100.2)Sol/s 438(438.0)W- 128ms
 0>GTX 1070 Ti `S:  1/0 [46øC/52%] 12.81 I/s 25.9(25.9)Sol/s  65( 64.5)W clk=1771MHz mclk=3802MHz Sol/W=0.40
 1>GTX 1070 Ti `S:  0/0 [48øC/52%] 13.15 I/s 27.4(27.4)Sol/s 110(110.1)W clk=1708MHz mclk=3802MHz Sol/W=0.25
 2>GTX 1070 Ti `S:  0/0 [48øC/53%] 12.71 I/s 25.0(25.0)Sol/s  30( 30.3)W clk=1607MHz mclk=4006MHz Sol/W=0.82
 3>GTX 1070 Ti `S:  0/0 [50øC/56%]  0.48 I/s  0.1( 0.1)Sol/s  30( 30.0)W clk=1607MHz mclk=3802MHz Sol/W=0.00
 4>GTX 1070 Ti `S:  0/0 [50øC/53%] 12.81 I/s 24.4(24.4)Sol/s 113(113.4)W clk=1670MHz mclk=3802MHz Sol/W=0.21
 5>GTX 1070 Ti `S:  0/0 [49øC/55%]  0.00 I/s  0.0( 0.0)Sol/s  29( 29.0)W clk=1607MHz mclk=3802MHz Sol/W=0.00
 6>GTX 1070 Ti `S:  0/0 [46øC/52%]  0.00 I/s  0.0( 0.0)Sol/s  30( 29.8)W clk=1607MHz mclk=3802MHz Sol/W=0.00
 7>GTX 1070 Ti `S:  0/0 [44øC/51%]  0.00 I/s  0.0( 0.0)Sol/s  31( 30.8)W clk=1607MHz mclk=3802MHz Sol/W=0.00
[ 0d 0h 0m29s] 117(116.8)Sol/s 659(659.0)W- 130ms
 0>GTX 1070 Ti `S:  1/0 [54øC/63%] 12.98 I/s 25.8(25.8)Sol/s 119(118.6)W clk=1683MHz mclk=3802MHz Sol/W=0.22
 1>GTX 1070 Ti `S:  0/0 [53øC/62%] 13.27 I/s 25.7(25.7)Sol/s 121(121.4)W clk=1695MHz mclk=3802MHz Sol/W=0.21
 2>GTX 1070 Ti `S:  1/0 [55øC/64%]*13.10 I/s 26.8(26.8)Sol/s 113(113.3)W clk=1683MHz mclk=3802MHz Sol/W=0.24
 3>GTX 1070 Ti `S:  1/0 [54øC/61%]*13.32 I/s 29.3(29.3)Sol/s 106(105.9)W clk=1683MHz mclk=3802MHz Sol/W=0.28
 4>GTX 1070 Ti `S:  0/0 [51øC/55%] 13.05 I/s 24.9(24.9)Sol/s 110(110.4)W clk=1657MHz mclk=3802MHz Sol/W=0.23
 5>GTX 1070 Ti `S:  1/0 [46øC/52%]* 0.27 I/s  0.0( 0.0)Sol/s  29( 28.9)W clk=1607MHz mclk=3802MHz Sol/W=0.00
 6>GTX 1070 Ti `S:  0/0 [45øC/52%]  0.00 I/s  0.0( 0.0)Sol/s  30( 29.7)W clk=1607MHz mclk=3802MHz Sol/W=0.00
 7>GTX 1070 Ti `S:  0/0 [44øC/50%]  0.00 I/s  0.0( 0.0)Sol/s  31( 30.9)W clk=1607MHz mclk=3802MHz Sol/W=0.00
[ 0d 0h 0m39s] 131(131.2)Sol/s 696(688.9)W- 130ms
 0>GTX 1070 Ti `S:  1/0 [54øC/64%] 13.04 I/s 25.0(25.0)Sol/s 119(119.3)W clk=1670MHz mclk=3802MHz Sol/W=0.21
 1>GTX 1070 Ti `S:  0/0 [54øC/63%] 13.31 I/s 27.8(27.8)Sol/s 122(122.1)W clk=1708MHz mclk=3802MHz Sol/W=0.23
 2>GTX 1070 Ti `S:  1/0 [56øC/66%] 13.20 I/s 27.7(27.7)Sol/s 111(111.6)W clk=1695MHz mclk=3802MHz Sol/W=0.25
 3>GTX 1070 Ti `S:  1/0 [56øC/65%] 13.31 I/s 26.2(26.2)Sol/s 113(111.6)W clk=1683MHz mclk=3802MHz Sol/W=0.24
 4>GTX 1070 Ti `S:  0/0 [51øC/57%] 13.14 I/s 25.0(25.0)Sol/s 111(111.0)W clk=1657MHz mclk=3802MHz Sol/W=0.22
 5>GTX 1070 Ti `S:  1/0 [54øC/60%] 13.23 I/s 26.3(26.3)Sol/s  69( 61.6)W clk=1670MHz mclk=3802MHz Sol/W=0.43
 6>GTX 1070 Ti `S:  0/0 [43øC/50%]  0.00 I/s  0.0( 0.0)Sol/s  19( 20.8)W clk=139MHz mclk=405MHz Sol/W=0.00
 7>GTX 1070 Ti `S:  0/0 [44øC/50%]  0.00 I/s  0.0( 0.0)Sol/s  31( 30.9)W clk=1607MHz mclk=3802MHz Sol/W=0.00
[ 0d 0h 0m49s] 145(145.3)Sol/s 695(688.8)W- 130ms
 0>GTX 1070 Ti `S:  1/0 [54øC/64%] 13.08 I/s 25.0(25.0)Sol/s 119(119.3)W clk=1670MHz mclk=3802MHz Sol/W=0.21
 1>GTX 1070 Ti `S:  0/0 [54øC/63%] 13.34 I/s 27.2(27.2)Sol/s 122(122.1)W clk=1708MHz mclk=3802MHz Sol/W=0.22
 2>GTX 1070 Ti `S:  1/0 [56øC/66%] 13.25 I/s 27.7(27.7)Sol/s 111(111.6)W clk=1695MHz mclk=3802MHz Sol/W=0.25
 3>GTX 1070 Ti `S:  1/0 [56øC/65%] 13.32 I/s 25.5(25.5)Sol/s 113(111.6)W clk=1683MHz mclk=3802MHz Sol/W=0.23
 4>GTX 1070 Ti `S:  0/0 [51øC/57%] 13.19 I/s 25.7(25.7)Sol/s 111(111.0)W clk=1657MHz mclk=3802MHz Sol/W=0.23
 5>GTX 1070 Ti `S:  2/0 [54øC/60%]*13.26 I/s 26.5(26.5)Sol/s  69( 61.6)W clk=1670MHz mclk=3802MHz Sol/W=0.43
 6>GTX 1070 Ti `S:  0/0 [43øC/50%]  0.00 I/s  0.0( 0.0)Sol/s  19( 20.8)W clk=139MHz mclk=405MHz Sol/W=0.00
 7>GTX 1070 Ti `S:  0/0 [42øC/50%]  0.19 I/s  0.0( 0.0)Sol/s  31( 30.8)W clk=1607MHz mclk=3802MHz Sol/W=0.00
[ 0d 0h 0m59s] 157(157.0)Sol/s 777(744.4)W- 129ms
 0>GTX 1070 Ti `S:  1/0 [54øC/64%] 13.11 I/s 24.7(24.7)Sol/s 119(118.8)W clk=1657MHz mclk=3802MHz Sol/W=0.21
 1>GTX 1070 Ti `S:  0/0 [54øC/64%] 13.36 I/s 26.9(26.9)Sol/s 119(120.1)W clk=1683MHz mclk=3802MHz Sol/W=0.22
 2>GTX 1070 Ti `S:  1/0 [56øC/67%] 13.27 I/s 27.2(27.2)Sol/s 109(109.9)W clk=1683MHz mclk=3802MHz Sol/W=0.25
 3>GTX 1070 Ti `S:  1/0 [56øC/68%] 13.33 I/s 26.4(26.4)Sol/s 116(114.4)W clk=1683MHz mclk=3802MHz Sol/W=0.23
 4>GTX 1070 Ti `S:  1/0 [52øC/57%]*13.22 I/s 26.4(26.4)Sol/s 115(113.9)W clk=1645MHz mclk=3802MHz Sol/W=0.23
 5>GTX 1070 Ti `S:  4/0 [56øC/65%]*13.25 I/s 26.4(26.4)Sol/s 102( 86.3)W clk=1695MHz mclk=3802MHz Sol/W=0.31
 6>GTX 1070 Ti `S:  0/0 [42øC/49%]  0.15 I/s  0.0( 0.0)Sol/s  25( 24.3)W clk=1607MHz mclk=3802MHz Sol/W=0.00
 7>GTX 1070 Ti `S:  0/0 [49øC/52%] 13.35 I/s 27.0(27.0)Sol/s  71( 56.8)W clk=1670MHz mclk=3802MHz Sol/W=0.48
[ 0d 0h 1m09s] 172(172.5)Sol/s 846(792.0)W- 129ms
 0>GTX 1070 Ti `S:  1/0 [54øC/64%] 13.12 I/s 25.9(25.9)Sol/s 120(119.7)W clk=1657MHz mclk=3802MHz Sol/W=0.22
 1>GTX 1070 Ti `S:  0/0 [55øC/64%] 13.36 I/s 26.7(26.7)Sol/s 116(117.8)W clk=1708MHz mclk=3802MHz Sol/W=0.23
 2>GTX 1070 Ti `S:  1/0 [56øC/69%] 13.29 I/s 27.1(27.1)Sol/s 113(111.9)W clk=1683MHz mclk=3802MHz Sol/W=0.24
 3>GTX 1070 Ti `S:  1/0 [57øC/68%] 13.33 I/s 25.7(25.7)Sol/s 118(115.7)W clk=1695MHz mclk=3802MHz Sol/W=0.22
 4>GTX 1070 Ti `S:  1/0 [52øC/59%] 13.24 I/s 26.6(26.6)Sol/s 115(114.2)W clk=1657MHz mclk=3802MHz Sol/W=0.23
 5>GTX 1070 Ti `S:  4/0 [56øC/68%] 13.25 I/s 26.5(26.5)Sol/s 105( 92.5)W clk=1670MHz mclk=3802MHz Sol/W=0.29
 6>GTX 1070 Ti `S:  0/0 [48øC/52%] 12.83 I/s 24.3(24.3)Sol/s  71( 49.7)W clk=1721MHz mclk=3802MHz Sol/W=0.49
 7>GTX 1070 Ti `S:  0/0 [51øC/55%] 13.33 I/s 27.1(27.1)Sol/s  89( 70.5)W clk=1670MHz mclk=3802MHz Sol/W=0.38
[ 0d 0h 1m20s] 179(179.1)Sol/s 879(821.1)W- 129ms
 0>GTX 1070 Ti `S:  1/0 [55øC/65%] 13.13 I/s 25.9(25.9)Sol/s 113(116.5)W clk=1657MHz mclk=3802MHz Sol/W=0.22
 1>GTX 1070 Ti `S:  0/0 [54øC/65%] 13.37 I/s 26.5(26.5)Sol/s 118(118.2)W clk=1695MHz mclk=3802MHz Sol/W=0.22
 2>GTX 1070 Ti `S:  3/0 [56øC/68%]*13.30 I/s 26.6(26.6)Sol/s 110(110.7)W clk=1683MHz mclk=3802MHz Sol/W=0.24
 3>GTX 1070 Ti `S:  1/0 [57øC/70%] 13.33 I/s 25.2(25.2)Sol/s 108(111.7)W clk=1670MHz mclk=3802MHz Sol/W=0.23
 4>GTX 1070 Ti `S:  1/0 [52øC/59%] 13.24 I/s 26.5(26.5)Sol/s 113(113.6)W clk=1645MHz mclk=3802MHz Sol/W=0.23
 5>GTX 1070 Ti `S:  4/0 [57øC/69%] 13.23 I/s 26.0(26.0)Sol/s 114(100.1)W clk=1721MHz mclk=3802MHz Sol/W=0.26
 6>GTX 1070 Ti `S:  0/0 [50øC/54%] 13.27 I/s 25.0(25.0)Sol/s  96( 67.1)W clk=1708MHz mclk=3802MHz Sol/W=0.37
 7>GTX 1070 Ti `S:  0/0 [52øC/57%] 13.32 I/s 27.8(27.8)Sol/s 106( 83.2)W clk=1683MHz mclk=3802MHz Sol/W=0.33
[ 0d 0h 1m30s] 191(191.3)Sol/s 898(841.9)W- 130ms
 0>GTX 1070 Ti `S:  2/0 [55øC/64%]*13.13 I/s 25.8(25.8)Sol/s 115(116.7)W clk=1657MHz mclk=3802MHz Sol/W=0.22
 1>GTX 1070 Ti `S:  0/0 [55øC/64%] 13.37 I/s 26.7(26.7)Sol/s 115(117.1)W clk=1695MHz mclk=3802MHz Sol/W=0.23
 2>GTX 1070 Ti `S:  3/0 [57øC/69%] 13.30 I/s 26.6(26.6)Sol/s 113(112.0)W clk=1683MHz mclk=3802MHz Sol/W=0.24
 3>GTX 1070 Ti `S:  1/0 [57øC/70%] 13.32 I/s 25.6(25.6)Sol/s 109(111.4)W clk=1683MHz mclk=3802MHz Sol/W=0.23
 4>GTX 1070 Ti `S:  1/0 [52øC/59%] 13.25 I/s 26.7(26.7)Sol/s 113(113.3)W clk=1645MHz mclk=3802MHz Sol/W=0.24
 5>GTX 1070 Ti `S:  5/0 [57øC/70%]*13.23 I/s 26.6(26.6)Sol/s 118(104.7)W clk=1683MHz mclk=3802MHz Sol/W=0.25
 6>GTX 1070 Ti `S:  0/0 [51øC/55%] 13.41 I/s 26.7(26.7)Sol/s 102( 76.1)W clk=1721MHz mclk=3802MHz Sol/W=0.35
 7>GTX 1070 Ti `S:  0/0 [52øC/59%] 13.31 I/s 26.5(26.5)Sol/s 112( 90.7)W clk=1670MHz mclk=3802MHz Sol/W=0.29

[somaton]

same here, 6 1080ti cards, they does not start all at same time. But that is not biggest problem, after running for few hours when i come back, 2 of 3 rigs crashed - miniz window just disappeared, mining 150.5, did not have that problem with previous version, but of course with different algo, because 150.5 wasnt available.

[miniZ]

using miniZ on mmpOS and at some point overnight, the pool stopped accepting shares.
miner kept going and stats were showing fine in the OS but at pool, miner has stopped totally.

what might be causing this?

i have reverted to using the miner via command line, bypassing the OS UI but i don't think that is the issue as the OS still showed sol/s
mining 150_5

Hi, overnight, I had the same problem on both rigs

OS win10

Hi rgsnedds, stzcze,
Since your messages, we have updated the v1.3n+ files.
Please check it out and let us know how if it fixed your problem.       
Thank you for your feedback!
Cheers

[miniZ]

is it normal that your miner temp goes down while mining with this miner?
I noticed the difference of this mining software from other mining software it keeps my rigs cooler is it normal?
Before my GTX 1080ti reach 65c but right now the temp is playing around 55c?

or maybe there's wrong about my rig that is why it detects low temps in all of my cards?

Hi crairezx20,
The difference looks a bit too big to be normal. Could you post here the log ?
Also, can you let us know which miniZ version are you using? Is it Cuda 8 or Cuda 10? Which pool are you using?
Thanks.
Cheers

Where can I find the logs is it from a command prompt?
I'm using awesomeminer while mining with 3 different cards to test my gtx 1080ti super jetstream gives me temp around 55c at night and sometimes 59 in hot days.
But other cards reach 63c+ for gtx 1060 and 1070 but right now I currently removed 1070 due to fan issue already cleaned it but it looks like the left fan is stuck forever.

I currently have Cuda 10 driver installed and I'm using equipool mining with equihash 144.5 algo.

Here are the logs for hot days.

Hi crairezx20,

Thank you for the information.
By looking at your log, all seems to be running OK.
Cheers

[miniZ]

miniZ - I downloaded the newest update (I'll refer to it as v1.3n++).  It is running, but CPU still got up to 100%.  It took about 1 minute for all 8 cards to actually start working (see logs below) and by the time the last card was going, CPU was at 100%.  I will have to run it for a while to see if it stops sending shares to the pool or crashes.  Thanks

Hi DanGB,
Thanks for all the feedback.
Could you see which process is occupying 100%?
We have been unable replicate your error exactly.
Cheers

[miniZ]

same here, 6 1080ti cards, they does not start all at same time. But that is not biggest problem, after running for few hours when i come back, 2 of 3 rigs crashed - miniz window just disappeared, mining 150.5, did not have that problem with previous version, but of course with different algo, because 150.5 wasnt available.

Hi somaton,
From your message it may be the case that you are not using our last fix.
We have updated the v1.3n+ files a while ago.
Could you please download again and see if it helps?
Thanks.
Cheers

[DanGB]

miniZ - I downloaded the newest update (I'll refer to it as v1.3n++).  It is running, but CPU still got up to 100%.  It took about 1 minute for all 8 cards to actually start working (see logs below) and by the time the last card was going, CPU was at 100%.  I will have to run it for a while to see if it stops sending shares to the pool or crashes.  Thanks

Hi DanGB,
Thanks for all the feedback.
Could you see which process is occupying 100%?
We have been unable replicate your error exactly.
Cheers

miniZ - Windows Command Processor (which is miniZ.exe underneath that) is about 65%-75% and System is about 20%-25% and System interrupts just a couple %.  Have you been able to test with a Celeron processor, because my i5 works better (not sure yet if it is stable).

[miniZ]

Anyone else having trouble that miner is mining and working and its actually OFFLINE at pool (leafpool but yesturday same happened all night long i left my home pc with 1 gpu mining at f2pool and it miner only for 1-2 hours )? ..... I use HiveOS currently and 1 of the my rigs went offline at some point but it was working ....

also all extra parameters for Hive are ignored , if I add --oc1 miner doesnt even start at all . It just hangs at beginning and does nothing. Adding --show-shares etc etc --latency etc does nothing on hiveos . I tired one at line and all on one line , doesnt matter , miner is started without extra params

also please make an option to disable all the calls for nvml i guess and dont output any GPU info , we can see this info on main monitoring page..

Hi N0pr3s3n7,
we are looking into your offline worker problem.
Maybe it is fixed in the last miniZ build. We are unsure, since it is hard to replicate.

Because you need to manually delete the file (to avoid this), on your flightsheet write in
Installation URL: https://miniz.ch/hiveos/miniZ-1.3n1.tar.gz

About the options, it is odd what you describe. --oc1 might be related to your OC settings.

Regarding the nvml calls, we tested to remove nvml stuff and it made no difference.
This only happens every 10s, it has no impact on cpu usage, which is a separate problem that we are investigating.

Let us know if the new file helped.
Thanks!
Cheers

[miniZ]

miniZ - I downloaded the newest update (I'll refer to it as v1.3n++).  It is running, but CPU still got up to 100%.  It took about 1 minute for all 8 cards to actually start working (see logs below) and by the time the last card was going, CPU was at 100%.  I will have to run it for a while to see if it stops sending shares to the pool or crashes.  Thanks

Hi DanGB,
Thanks for all the feedback.
Could you see which process is occupying 100%?
We have been unable replicate your error exactly.
Cheers

miniZ - Windows Command Processor (which is miniZ.exe underneath that) is about 65%-75% and System is about 20%-25% and System interrupts just a couple %.  Have you been able to test with a Celeron processor, because my i5 works better (not sure yet if it is stable).

Hi Dan,
We tested on win10, Celeron(R) G4900, v1.3n+, with no problem.
But we will keep looking
Thanks.
Cheers

[rgsnedds]

responsive support here. if i had any merit, i'd use it ^
mmpOS have deployed n1.3+ and it seems to be working fine.
it would be helpful if you can push out advisories on updates to the mmpOS guys, they are upcoming in this field.

thanks.

[stzcze]

using miniZ on mmpOS and at some point overnight, the pool stopped accepting shares.
miner kept going and stats were showing fine in the OS but at pool, miner has stopped totally.

what might be causing this?

i have reverted to using the miner via command line, bypassing the OS UI but i don't think that is the issue as the OS still showed sol/s
mining 150_5

Hi, overnight, I had the same problem on both rigs

OS win10

Hi rgsnedds, stzcze,
Since your messages, we have updated the v1.3n+ files.
Please check it out and let us know how if it fixed your problem.       
Thank you for your feedback!
Cheers

With the new version it looks ok. W10, G3930, 5x 1080ti + 1x1080 cpu load 100%, new version 70%. Rig 6x1060GB, W10, G4400 cpu 100%, new version 15%. Good work