dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
June 01, 2014, 05:04:37 PM |
|
If I want to overclock the miners in the future, will the AX1200i have enough juice? Further consideration, is this really a good recommendation to power 3x S1 dual blade 180GH/s S1's now (~360W per) and then overclocked (~400W per)?
The longer you run a racecar in the red the sooner it is going to blow up. Hmmm.
again, thank you.
EDIT: I now see 1320W peak power on the 1200. So... why am I doubting Dogie?!
If you've got a less expensive solution I'm all ears.
AXI's are the bees knees and last forever, and will easily do 1300W 24/7. I personally run lots of CXMs.
|
|
|
|
|
|
|
|
Transactions must be included in a block to be properly completed. When you send a transaction, it is broadcast to miners. Miners can then optionally include it in their next blocks. Miners will be more inclined to include your transaction if it has a higher transaction fee.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
pokeyjones
|
|
June 02, 2014, 01:48:59 AM |
|
where to buy new S1 miners? in the US, who do you recommend? who should I avoid?
jones gear?
i think one CXM per at 500W will do. yes? thanks again!
|
|
|
|
pokeyjones
|
|
June 02, 2014, 02:24:54 AM |
|
i would not, ever, EVER... buy or attempt to buy any bitcoin mining gear on ebay.
JG? 112bit?
|
|
|
|
Airwhale
|
|
June 02, 2014, 02:35:10 AM |
|
Do you find that the 1200AXs are that much worse then the AXIs? You can generally get the axs for like $50 cheaper, and the axi's only seem to add the fancy electronic monitoring stuff.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7862
'The right to privacy matters'
|
|
June 02, 2014, 02:53:41 AM |
|
|
|
|
|
Rock53
Newbie
Offline
Activity: 13
Merit: 0
|
|
June 22, 2014, 08:26:40 PM |
|
Does anyone have the Corsair 1500w:
AX1500i Digital ATX Power Supply — 1500 Watt Fully-Modular PSU
1500 Watts of continuous power, an incredible 94% efficiency rating, and Corsair Link desktop monitoring control make the incredible AX1500i the best enthusiast PC power supply you can own.
$449.99 USD
Do you think that I could run 4 Antminer S-1's? or should should I just run 3 on the Corsair AX1200i Digital ATX Power Supply — 1200 Watt Fully-Modular PSU.
Is anyone running 3 Antminer s1's on the Corsair AX1200i Digital ATX Power Supply — 1200 Watt?
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
June 22, 2014, 09:02:24 PM |
|
3 on the 1200 is common and fine.
|
|
|
|
kevin1234a
Legendary
Offline
Activity: 1162
Merit: 1000
Decentralizing Jesus on the Blockchain
|
|
July 06, 2014, 03:12:39 AM |
|
i dont know if it is right to ask this question here or not but hope you guys put me in right direction!!! i have a LEPA 1000W PSU and would like to connect all of my mining hardware with it (as below list) 1 x wifi router 3 x Raspberry Pi Boards 1 x Gridseed Dual Miner 1 x Rock miner 1 x 20 ports USB hub 1 x 10 port usb hub i know 1000W PSU will be more than enough to fulfill electricity needs for all above however i wanted to ask you what connectors should i use to connect all of above devices with the PSU and from where i can buy them. i found one(see below) connector which fulfills power needs of gridseed and wifi router. http://postimg.org/image/3xsh9izax/thanks for any suggestion and advise
|
|
|
|
Micky25
Legendary
Offline
Activity: 974
Merit: 1000
|
|
July 06, 2014, 02:58:43 PM |
|
Hi guys, before I blow up my psu I'll better try to get some advise from the pros. I want to get rid of some cables and short the (modular) psu at the plug side for kickstart. Can someone help and tell me which ones to short on my evga? Same these My EVGA. Which pins to short? Thanks in advance!!
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
July 06, 2014, 03:22:11 PM |
|
Don't short it on the PSU itself, they're not the same pin outputs and many pins are bridged. Bad things may happen.
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
July 06, 2014, 03:24:21 PM |
|
i dont know if it is right to ask this question here or not but hope you guys put me in right direction!!! i have a LEPA 1000W PSU and would like to connect all of my mining hardware with it (as below list) 1 x wifi router 3 x Raspberry Pi Boards 1 x Gridseed Dual Miner 1 x Rock miner 1 x 20 ports USB hub 1 x 10 port usb hub i know 1000W PSU will be more than enough to fulfill electricity needs for all above however i wanted to ask you what connectors should i use to connect all of above devices with the PSU and from where i can buy them. i found one(see below) connector which fulfills power needs of gridseed and wifi router. http://postimg.org/image/3xsh9izax/thanks for any suggestion and advise PCI-E to 2.1mm adapter for the gridseeds PCI-E to 2.5mm adapter for the rockminer. USB cable to Pis I wouldn't power anything else off the PSU, you're better off getting their mains adaptors.
|
|
|
|
kevin1234a
Legendary
Offline
Activity: 1162
Merit: 1000
Decentralizing Jesus on the Blockchain
|
|
July 06, 2014, 08:10:20 PM |
|
i dont know if it is right to ask this question here or not but hope you guys put me in right direction!!! i have a LEPA 1000W PSU and would like to connect all of my mining hardware with it (as below list) 1 x wifi router 3 x Raspberry Pi Boards 1 x Gridseed Dual Miner 1 x Rock miner 1 x 20 ports USB hub 1 x 10 port usb hub i know 1000W PSU will be more than enough to fulfill electricity needs for all above however i wanted to ask you what connectors should i use to connect all of above devices with the PSU and from where i can buy them. i found one(see below) connector which fulfills power needs of gridseed and wifi router. http://postimg.org/image/3xsh9izax/thanks for any suggestion and advise PCI-E to 2.1mm adapter for the gridseeds PCI-E to 2.5mm adapter for the rockminer. USB cable to Pis I wouldn't power anything else off the PSU, you're better off getting their mains adaptors. thanks bro, this what i thought that main adaptors will be good but i have only 2 main power sockets and on spare PSU so thought worth to give it a try.
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
July 06, 2014, 08:35:11 PM |
|
i dont know if it is right to ask this question here or not but hope you guys put me in right direction!!! i have a LEPA 1000W PSU and would like to connect all of my mining hardware with it (as below list) 1 x wifi router 3 x Raspberry Pi Boards 1 x Gridseed Dual Miner 1 x Rock miner 1 x 20 ports USB hub 1 x 10 port usb hub i know 1000W PSU will be more than enough to fulfill electricity needs for all above however i wanted to ask you what connectors should i use to connect all of above devices with the PSU and from where i can buy them. i found one(see below) connector which fulfills power needs of gridseed and wifi router. http://postimg.org/image/3xsh9izax/thanks for any suggestion and advise PCI-E to 2.1mm adapter for the gridseeds PCI-E to 2.5mm adapter for the rockminer. USB cable to Pis I wouldn't power anything else off the PSU, you're better off getting their mains adaptors. thanks bro, this what i thought that main adaptors will be good but i have only 2 main power sockets and on spare PSU so thought worth to give it a try. Will cost you much less to just get a gangway or whatever they're called
|
|
|
|
|
|
oskuro
|
|
July 31, 2014, 08:12:51 PM |
|
Do you recommend nox 850w psu? They are cheap
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
July 31, 2014, 08:49:45 PM |
|
Do you recommend nox 850w psu? They are cheap
Cheap and and recommend don't really fit in the same sentence. Miners run PSUs far surpassing what the manufacturers ever intended.
|
|
|
|
oskuro
|
|
July 31, 2014, 08:57:12 PM |
|
Do you recommend nox 850w psu? They are cheap
Cheap and and recommend don't really fit in the same sentence. Miners run PSUs far surpassing what the manufacturers ever intended. So please guys what psu do you recommend me. I don't know what to do. 1 psu for each s3 or 1 psu for 2 s3? ? Thx
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
July 31, 2014, 10:04:27 PM |
|
Do you recommend nox 850w psu? They are cheap
Cheap and and recommend don't really fit in the same sentence. Miners run PSUs far surpassing what the manufacturers ever intended. So please guys what psu do you recommend me. I don't know what to do. 1 psu for each s3 or 1 psu for 2 s3? ? Thx 1x AX 1200i or 2x CXM 750
|
|
|
|
oskuro
|
|
July 31, 2014, 10:05:05 PM |
|
Dogie i see you gave best score to: Corsair CX750M ( i have 2 of this psu, 1 for each S3). And 2 more S3 coming, so i thought i could buy a Corsair RM850M, i see you gave it also a very good score, so i can run 2 S3 with this PSu, right?? thanks! edit: sorry you just posted. so you say its better 1x AX 1200i instead of 1x CorsairRM850M? Why 1200W for 2 S3??(2 s3 even 3with OC im getting 725W together). So with corsair RM850M enough, right?? or not?? that 1200 corsair its so expensive for just running 2 S3, or can i run 3 s3 with that psu?
|
|
|
|
|