Dragon1748
Newbie
Offline
Activity: 61
Merit: 0
|
|
August 03, 2019, 07:38:17 PM |
|
I'd like to join the party on zergpool. Anybody can help me with the config? Where do I input target coin and payout coin etc... on the Apollo dashboard? Thanks
The FAQs are quite helpful on the zergpool site. Since I'm the pool and it's a win-win here's the easy way: URL:stratum+tcp://scrypt.mine.zergpool.com:3433/#xnsub Username: pick your wallet address that matches the coin you want to be paid out in Password: ID=[pick a name],c=[coin you want to be paid out in and must match your wallet address, have to pick one, place the three letter short hand in all caps: "LTC" or "DGB" , etc], mc=[use this option if you want to mine specific coins],m=party.Apollo Hope that helps!
|
|
|
|
Jota_US
Newbie
Offline
Activity: 53
Merit: 0
|
|
August 04, 2019, 04:40:58 AM |
|
I'd like to join the party on zergpool. Anybody can help me with the config? Where do I input target coin and payout coin etc... on the Apollo dashboard? Thanks
The FAQs are quite helpful on the zergpool site. Since I'm the pool and it's a win-win here's the easy way: URL:stratum+tcp://scrypt.mine.zergpool.com:3433/#xnsub Username: pick your wallet address that matches the coin you want to be paid out in Password: ID=[pick a name],c=[coin you want to be paid out in and must match your wallet address, have to pick one, place the three letter short hand in all caps: "LTC" or "DGB" , etc], mc=[use this option if you want to mine specific coins],m=party.Apollo Hope that helps! Thank you, I didn't realize the commands had to be in the password field itself.
|
|
|
|
Dragon1748
Newbie
Offline
Activity: 61
Merit: 0
|
|
August 04, 2019, 05:09:34 AM |
|
I'd like to join the party on zergpool. Anybody can help me with the config? Where do I input target coin and payout coin etc... on the Apollo dashboard? Thanks
The FAQs are quite helpful on the zergpool site. Since I'm the pool and it's a win-win here's the easy way: URL:stratum+tcp://scrypt.mine.zergpool.com:3433/#xnsub Username: pick your wallet address that matches the coin you want to be paid out in Password: ID=[pick a name],c=[coin you want to be paid out in and must match your wallet address, have to pick one, place the three letter short hand in all caps: "LTC" or "DGB" , etc], mc=[use this option if you want to mine specific coins],m=party.Apollo Hope that helps! Thank you, I didn't realize the commands had to be in the password field itself. Check out zergpool.com and look at the column on the left and continue scrolling all the way down. A ton more detail with what you can do with all the configurations.
|
|
|
|
Jota_US
Newbie
Offline
Activity: 53
Merit: 0
|
|
August 06, 2019, 02:57:12 AM |
|
I'd like to join the party on zergpool. Anybody can help me with the config? Where do I input target coin and payout coin etc... on the Apollo dashboard? Thanks
The FAQs are quite helpful on the zergpool site. Since I'm the pool and it's a win-win here's the easy way: URL:stratum+tcp://scrypt.mine.zergpool.com:3433/#xnsub Username: pick your wallet address that matches the coin you want to be paid out in Password: ID=[pick a name],c=[coin you want to be paid out in and must match your wallet address, have to pick one, place the three letter short hand in all caps: "LTC" or "DGB" , etc], mc=[use this option if you want to mine specific coins],m=party.Apollo Hope that helps! Thank you, I didn't realize the commands had to be in the password field itself. Check out zergpool.com and look at the column on the left and continue scrolling all the way down. A ton more detail with what you can do with all the configurations. Thank you that helped. Getting a lot of HW errors though (20%). Any advice?
|
|
|
|
Dragon1748
Newbie
Offline
Activity: 61
Merit: 0
|
|
August 06, 2019, 04:36:50 AM |
|
I'd like to join the party on zergpool. Anybody can help me with the config? Where do I input target coin and payout coin etc... on the Apollo dashboard? Thanks
The FAQs are quite helpful on the zergpool site. Since I'm the pool and it's a win-win here's the easy way: URL:stratum+tcp://scrypt.mine.zergpool.com:3433/#xnsub Username: pick your wallet address that matches the coin you want to be paid out in Password: ID=[pick a name],c=[coin you want to be paid out in and must match your wallet address, have to pick one, place the three letter short hand in all caps: "LTC" or "DGB" , etc], mc=[use this option if you want to mine specific coins],m=party.Apollo Hope that helps! Thank you, I didn't realize the commands had to be in the password field itself. Check out zergpool.com and look at the column on the left and continue scrolling all the way down. A ton more detail with what you can do with all the configurations. Thank you that helped. Getting a lot of HW errors though (20%). Any advice? How long have let your Apollo mine for? During initial start up I've had high errors but nothing worse than 5% and after enough data points the errors average to ~1%. I wouldn't blame zergpool just yet; although the pool isn't defect free. Could be the quality of your internet connection or many other factors... Recommend looking through this forum as it many good tips on what do and I would have a look at the Apollo support thread.
|
|
|
|
Jota_US
Newbie
Offline
Activity: 53
Merit: 0
|
|
August 06, 2019, 05:26:35 AM |
|
I'd like to join the party on zergpool. Anybody can help me with the config? Where do I input target coin and payout coin etc... on the Apollo dashboard? Thanks
The FAQs are quite helpful on the zergpool site. Since I'm the pool and it's a win-win here's the easy way: URL:stratum+tcp://scrypt.mine.zergpool.com:3433/#xnsub Username: pick your wallet address that matches the coin you want to be paid out in Password: ID=[pick a name],c=[coin you want to be paid out in and must match your wallet address, have to pick one, place the three letter short hand in all caps: "LTC" or "DGB" , etc], mc=[use this option if you want to mine specific coins],m=party.Apollo Hope that helps! Thank you, I didn't realize the commands had to be in the password field itself. Check out zergpool.com and look at the column on the left and continue scrolling all the way down. A ton more detail with what you can do with all the configurations. Thank you that helped. Getting a lot of HW errors though (20%). Any advice? How long have let your Apollo mine for? During initial start up I've had high errors but nothing worse than 5% and after enough data points the errors average to ~1%. I wouldn't blame zergpool just yet; although the pool isn't defect free. Could be the quality of your internet connection or many other factors... Recommend looking through this forum as it many good tips on what do and I would have a look at the Apollo support thread. Been running for a day. I disconnected wifi I think the miner was using it instead of ethernet. HW errors are slowly going down now. Wifi is definitely buggy for me.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2155
Merit: 1400
|
|
August 08, 2019, 08:19:35 PM |
|
Hey I just got my apollo miner with the power supply and SD card included. It won't boot tho...? I have it plugged in but I just see a static yellow and green light by the ethernet cord. No fan noise or nothing. Any idea whats wrong? Or does it take a while to boot?
No LED on the front? Do the ethernet lights flash when you turn on the power supply? If not it could be a corrupt SD card.
|
|
|
|
iaintkd
Newbie
Offline
Activity: 16
Merit: 0
|
|
August 11, 2019, 06:51:20 PM |
|
if your using a pc psu you have put the jumper connection on the 24 pin connector?
|
|
|
|
iaintkd
Newbie
Offline
Activity: 16
Merit: 0
|
|
August 11, 2019, 06:58:58 PM |
|
I find zergpool and zpool have a lot of errors, multipool and litecoinpool tend to be fine.
|
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2155
Merit: 1400
|
|
August 12, 2019, 06:46:14 PM |
|
MY 4 NEW FUTUREBIT APOLLOS LTC - BATCH 2. * MINER MODE: ECO (AUTO-VOLTAGE, FREQUENCY & FAN) * HASHRATE: AROUND 100 MH/S. * MINER TEMPERATURE: AROUND 155 FAHRENHEIT * HARDWARE ERRORS: AROUND 0.6%. * POWER CONSUMPTION: AROUND 545 W/H. * MINING ON LITECOINPOOL.ORG AT 400 MH/S DURING 30 DAYS PERIOD: AROUND 0.23 LTC ($19.80 AT TODAY'S PRICE) NICE PRODUCT FOR THE HOME MINER. WELL BALANCE FEATURES. GREAT PACKAGING BOX. COMPACT. SOLID. LIGHTWEIGHT DESIGN. GREAT METAL HOUSING. HIGH QUALITY PSU UNITS WITH SIDE FANS. THANKS FUTUREBIT. KEEP THE GREAT JOB!!. CHECK THE IMAGES OF MY "LIVING ROOM-MINING RIG": Nice setup and thanks for the kind words! You wattage seems a bit high though, are you sure your not running them on balanced? You should be closer to 450 watts in eco with 4.
|
|
|
|
|
estacionsj
Jr. Member
Offline
Activity: 55
Merit: 2
|
|
August 20, 2019, 04:20:54 AM |
|
MY 4 NEW FUTUREBIT APOLLOS LTC - BATCH 2. * MINER MODE: ECO (AUTO-VOLTAGE, FREQUENCY & FAN) * HASHRATE: AROUND 100 MH/S. * MINER TEMPERATURE: AROUND 155 FAHRENHEIT * HARDWARE ERRORS: AROUND 0.6%. * POWER CONSUMPTION: AROUND 545 W/H. * MINING ON LITECOINPOOL.ORG AT 400 MH/S DURING 30 DAYS PERIOD: AROUND 0.23 LTC ($19.80 AT TODAY'S PRICE) NICE PRODUCT FOR THE HOME MINER. WELL BALANCE FEATURES. GREAT PACKAGING BOX. COMPACT. SOLID. LIGHTWEIGHT DESIGN. GREAT METAL HOUSING. HIGH QUALITY PSU UNITS WITH SIDE FANS. THANKS FUTUREBIT. KEEP THE GREAT JOB!!. CHECK THE IMAGES OF MY "LIVING ROOM-MINING RIG": Nice setup and thanks for the kind words! You wattage seems a bit high though, are you sure your not running them on balanced? You should be closer to 450 watts in eco with 4. Looks like he has a modem / router plugged in also..
|
|
|
|
hersh9
Newbie
Offline
Activity: 22
Merit: 0
|
|
August 20, 2019, 12:41:23 PM |
|
Needing some help please. I've had my miner up and running for a couple weeks now and everything has been near perfect! Unfortunately, last night I went to speed up the fan on balanced mode to 45% and it kicked the breaker on my power strip.
Now, the miner turns on with red light illuminated on front and lower fan spinning. When I go to start the miner the light turns yellow for a moment then back to red and it will not start. I have yellow and green ethernet lights illuminated on the back. I've unplugged / plugged in and tried to start on several modes, but without success. Any help is greatly appreciated –thank you!
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2155
Merit: 1400
|
|
August 20, 2019, 02:37:55 PM |
|
Needing some help please. I've had my miner up and running for a couple weeks now and everything has been near perfect! Unfortunately, last night I went to speed up the fan on balanced mode to 45% and it kicked the breaker on my power strip.
Now, the miner turns on with red light illuminated on front and lower fan spinning. When I go to start the miner the light turns yellow for a moment then back to red and it will not start. I have yellow and green ethernet lights illuminated on the back. I've unplugged / plugged in and tried to start on several modes, but without success. Any help is greatly appreciated –thank you!
What were you running on the breaker that a fan speedup would trip it? Anyway sounds like the power outage caused your SD card to get corrupted, just follow the support thread linked on the main post of this thread on how to re-image your card.
|
|
|
|
hersh9
Newbie
Offline
Activity: 22
Merit: 0
|
|
August 20, 2019, 03:21:45 PM |
|
Needing some help please. I've had my miner up and running for a couple weeks now and everything has been near perfect! Unfortunately, last night I went to speed up the fan on balanced mode to 45% and it kicked the breaker on my power strip.
Now, the miner turns on with red light illuminated on front and lower fan spinning. When I go to start the miner the light turns yellow for a moment then back to red and it will not start. I have yellow and green ethernet lights illuminated on the back. I've unplugged / plugged in and tried to start on several modes, but without success. Any help is greatly appreciated –thank you!
What were you running on the breaker that a fan speedup would trip it? Anyway sounds like the power outage caused your SD card to get corrupted, just follow the support thread linked on the main post of this thread on how to re-image your card. I had other miners running on the power strip as well –yea, I was pushing the envelope- and for sure not a sole issue caused by the miner. Okay, this may be beyond my capabilities, but I'll give it a try! Thank you for pointing me in the right direction!
|
|
|
|
hersh9
Newbie
Offline
Activity: 22
Merit: 0
|
|
August 20, 2019, 10:33:24 PM |
|
Needing some help please. I've had my miner up and running for a couple weeks now and everything has been near perfect! Unfortunately, last night I went to speed up the fan on balanced mode to 45% and it kicked the breaker on my power strip.
Now, the miner turns on with red light illuminated on front and lower fan spinning. When I go to start the miner the light turns yellow for a moment then back to red and it will not start. I have yellow and green ethernet lights illuminated on the back. I've unplugged / plugged in and tried to start on several modes, but without success. Any help is greatly appreciated –thank you!
What were you running on the breaker that a fan speedup would trip it? Anyway sounds like the power outage caused your SD card to get corrupted, just follow the support thread linked on the main post of this thread on how to re-image your card. I'm back in business after the re-image - thanks again for your support!!
|
|
|
|
Jota_US
Newbie
Offline
Activity: 53
Merit: 0
|
|
August 22, 2019, 04:32:43 AM |
|
Somebody found an LTC block in the zergpool party
|
|
|
|
YuSoDum
Member
Offline
Activity: 164
Merit: 13
|
|
August 22, 2019, 11:34:54 AM |
|
I really want to try a few of these. Little solo mining of NENG perhaps...Maybe I can talk my wife into letting me snag a couple lol...
|
|
|
|
AnkleBiter
Newbie
Offline
Activity: 23
Merit: 1
|
|
August 22, 2019, 11:49:47 AM |
|
Anyone recently receive theirs? Ordered mine in July before it was sold out. Was told it would ship out last week. Never received tracking information. Inquired about it on Monday, said I would get a tracking number in a few hours, received a tracking number but it's still in pre-shipment, hasn't moved since Monday.
|
|
|
|
|