Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner

[ttlargura1]

Hello,

I was considering buying a Zig Z1 from asicminermarket and i noticed in a thread that you had bought one from there. Would you recommend this site for ordering ASICs ? How was your experience with them? Prompt delivery?


Thanks for your help

[1714920383]

1714920383

[1714920383]

1714920383

[1714920383]

1714920383

[1714920383]

1714920383

[steliozz]

Hello,

I was considering buying a Zig Z1 from asicminermarket and i noticed in a thread that you had bought one from there. Would you recommend this site for ordering ASICs ? How was your experience with them? Prompt delivery?


Thanks for your help

asicminermarket is famous for delays and average customer service. At least for me and the little crypto community around me they always delivered late. Sometimes it looks like they got great prices just cause they deliver stock as batches...with a thousend different excuses.

There are better ones like cryptodrilling and prominerz.com, I always check asicminervalue.com to get an overview....

[yrk1957]

Hello,

I was considering buying a Zig Z1 from asicminermarket and i noticed in a thread that you had bought one from there. Would you recommend this site for ordering ASICs ? How was your experience with them? Prompt delivery?


Thanks for your help

I have ordered a few times from them, shipped within a day or two of payment. Though someone else mentioned that their customer service is lacking.

[spartan117x7]

I have some dayun zig z1's coming soon and I'm gong to pair it with Bitmain APW3++ PSUs. My first time using ASICs but the label on the PSU looks like this:

https://drive.google.com/drive/folders/1IRWfMKgP_t-aeW4Mk_T4jNyGnMnQFCMf?usp=sharing

I live in the USA so I have 120VAC outlets. Bitmain's site says it can switch to 120VAC and I also see products with the label stating 120VAC but this one doesn't. Should I stay away from this? Also, the miners work on 120VAC outlets right?

This requires a psu, so AC side voltage on the psu does not matter to it. Only the DC output matters. So normally any psu being able deliver 1200W should be fine, with 120V or 240V input.

But the APW3++ delivers only 1200W when running on 120V, so you are running on limits. I am not sure it’s wise. Maybe others have experience. I got 240V outlets done for miners.

I got a bunch of ATX psus so it should be fine. What is the maximum wattage from one six pin pcie? Some sources say 150w but I always thought it was 75w because that's the case when connecting consumer GPUs with consumer ATX psus. Only 8 pins can achieve 150w right?

Also, does anyone know if you can solo mine Monacoin with these miners? I know you can't do Vertcoin solo because they got rid of the getwork protocol within the wallet. I used to solo mine other coins so I already know how to set the ip address & port number on your configuration file before wallet startup.

[ruplikminer]

Hello,

I was considering buying a Zig Z1 from asicminermarket and i noticed in a thread that you had bought one from there. Would you recommend this site for ordering ASICs ? How was your experience with them? Prompt delivery?


Thanks for your help

I ordered an ASIC from them. They delayed the shipping A LOT cause of some "payment problems". Also they reipled ONE time per day to my emails. So the explanation of these "problems" and the fix took a lot of days. It have been a bad experience honestly. Would not order again from them. They are NOT SCAM in the way you pay and they steal your money. But they uses to delay a lot fhe shipment of the pacakge

[Phelpsfarm]

Exceptionally twitchy, unreliable, and all around terrible miner with zero support and unknown warranty. Not even close to worth buying.

[mattaero]

Exceptionally twitchy, unreliable, and all around terrible miner with zero support and unknown warranty. Not even close to worth buying.

This.  I have one, and I can't even get it to work right. 

Anyone happen to have a miner.json file they could export and know to be working that you could send me so I can see what is going on?

Any help is appreciated!

[mattaero]

Or, in the alternative... could someone send me a copy of their working bootdrive for the Zig Z1?

This is a pain in the ass.

[yrk1957]

Or, in the alternative... could someone send me a copy of their working bootdrive for the Zig Z1?

This is a pain in the ass.

https://drive.google.com/open?id=1z564S10Q3SWN8-8_HmreuUCQEI_gXYl9

[mattaero]

Or, in the alternative... could someone send me a copy of their working bootdrive for the Zig Z1?

This is a pain in the ass.

https://drive.google.com/open?id=1z564S10Q3SWN8-8_HmreuUCQEI_gXYl9

This is very much appreciated.  I may even end up mining for you for a while as I figure it out!

Any EXT4 formatted drive should work for the miner correct?

[yrk1957]

Or, in the alternative... could someone send me a copy of their working bootdrive for the Zig Z1?

This is a pain in the ass.

https://drive.google.com/open?id=1z564S10Q3SWN8-8_HmreuUCQEI_gXYl9

This is very much appreciated.  I may even end up mining for you for a while as I figure it out!

Any EXT4 formatted drive should work for the miner correct?

Please donate to charity!!

You can use the imaging software included, it will format the disk as required.

[mattaero]

It keeps telling me,  "The miner may not boot" and nothing happens, not matter what settings I input in dashboard.  I get no hashing, and nothing seems to be happening.  Anyone have any thoughts?  User error? lol

 

[yrk1957]

It keeps telling me,  "The miner may not boot" and nothing happens, not matter what settings I input in dashboard.  I get no hashing, and nothing seems to be happening.  Anyone have any thoughts?  User error? lol

 

So new firmware? All three Pools setup correctly? Everything else default?

Did you wait 5 minutes? Its takes time to start.

[mattaero]

It keeps telling me,  "The miner may not boot" and nothing happens, not matter what settings I input in dashboard.  I get no hashing, and nothing seems to be happening.  Anyone have any thoughts?  User error? lol

 

So new firmware? All three Pools setup correctly? Everything else default?

Did you wait 5 minutes? Its takes time to start.

I have the pools set up to:

stratum+tcp://lyra2rev2.usa.nicehash.com:3347   then my BTC address for nicehash and my password.  Now and then it says "online" then immediately goes to offline.  I have updated the firmware and it says the September 26 date... so it updated.  It wouldn't boot with the updated file system, so I kept using the one that came with it for now.  

This is what shows up in settings:

Miner will start with this syntax:
/var/www/html/resources/cgminer.config
JSON Conf:
{
    "lyra2rev2-clk": "900",
    "lyra2rev2-check-testnonce": true,
    "lyra2rev2-restartenable": true,
    "lyra2rev2-restarthashrate": "5",
    "lyra2rev2-restartfailedcount": "0",
    "lyra2rev2-cutoffenable": false,
    "lyra2rev2-cutofffanspeedin": "65",
    "lyra2rev2-cutofffanspeedout": "65",
    "lyra2rev2-cutofftemperature": "50",
    "pools": [
        {
            "url": "stratum+tcp:\/\/lyra2rev2.usa.nicehash.com:3347",
            "user": "3NiRSLJJo18T6dBAoz7MuZ61XexURfPu7G",
            "pass": "x"
        },
        {
            "url": "stratum+tcp:\/\/lyra2rev2.usa.nicehash.com:3347",
            "user": "3NiRSLJJo18T6dBAoz7MuZ61XexURfPu7G",
            "pass": "x"
        },
        {
            "url": "stratum+tcp:\/\/lyra2rev2.usa.nicehash.com:3347",
            "user": "3NiRSLJJo18T6dBAoz7MuZ61XexURfPu7G",
            "pass": "x"
        }
    ],
    "lyra2rev2-dynamic-frequency": false
}

I have no idea how to make it work.

[yrk1957]

This is my file:

Code:

{
    "pools": [
        {
            "url": "stratum+tcp:\/\/lyra2rev2.usa.nicehash.com:3347#xnsub",
            "user": "--------",
            "pass": "x"
        },
        {
            "url": "stratum+tcp:\/\/hub.miningpoolhub.com:12018",
            "user": "---------",
            "pass": "x"
        },
        {
            "url": "stratum+tcp:\/\/lyra2rev2.eu.nicehash.com:3347#xnsub",
            "user": "----------",
            "pass": "x"
        }
    ],
    "api-allow": "W:0\/0",
    "api-description": "cgminer 4.11.1",
    "api-listen": true,
    "api-mcast-addr": "224.0.0.75",
    "api-mcast-code": "FTW",
    "api-mcast-des": "",
    "api-mcast-port": "4028",
    "api-network": true,
    "api-port": "4028",
    "expiry": "120",
    "failover-switch-delay": "300",
    "log": "5",
    "queue": "9999",
    "scan-time": "60",
    "shares": "0",
    "lyra2rev2-clk": "900",
    "lyra2rev2-vol": "0",
    "lyra2rev2-asic-x": "4",
    "lyra2rev2-asic-y": "24",
    "lyra2rev2-asic-num": "50",
    "lyra2rev2-cutofftemperature": "50",
    "lyra2rev2-cutofffanspeedin": "100",
    "lyra2rev2-cutofffanspeedout": "100",
    "lyra2rev2-restarthashrate": "7",
    "lyra2rev2-restartfailedcount": "100",
    "lyra2rev2-fan": "LV1",
    "lyra2rev2-check-testnonce": false,
    "lyra2rev2-scan-serial": "\/dev\/ttyS3",
    "lyra2rev2-restartenable": false,
    "lyra2rev2-cutoffenable": false
}

What happens with new firmware?

[mattaero]

This is my file:

Code:

{
    "pools": [
        {
            "url": "stratum+tcp:\/\/lyra2rev2.usa.nicehash.com:3347#xnsub",
            "user": "--------",
            "pass": "x"
        },
        {
            "url": "stratum+tcp:\/\/hub.miningpoolhub.com:12018",
            "user": "---------",
            "pass": "x"
        },
        {
            "url": "stratum+tcp:\/\/lyra2rev2.eu.nicehash.com:3347#xnsub",
            "user": "----------",
            "pass": "x"
        }
    ],
    "api-allow": "W:0\/0",
    "api-description": "cgminer 4.11.1",
    "api-listen": true,
    "api-mcast-addr": "224.0.0.75",
    "api-mcast-code": "FTW",
    "api-mcast-des": "",
    "api-mcast-port": "4028",
    "api-network": true,
    "api-port": "4028",
    "expiry": "120",
    "failover-switch-delay": "300",
    "log": "5",
    "queue": "9999",
    "scan-time": "60",
    "shares": "0",
    "lyra2rev2-clk": "900",
    "lyra2rev2-vol": "0",
    "lyra2rev2-asic-x": "4",
    "lyra2rev2-asic-y": "24",
    "lyra2rev2-asic-num": "50",
    "lyra2rev2-cutofftemperature": "50",
    "lyra2rev2-cutofffanspeedin": "100",
    "lyra2rev2-cutofffanspeedout": "100",
    "lyra2rev2-restarthashrate": "7",
    "lyra2rev2-restartfailedcount": "100",
    "lyra2rev2-fan": "LV1",
    "lyra2rev2-check-testnonce": false,
    "lyra2rev2-scan-serial": "\/dev\/ttyS3",
    "lyra2rev2-restartenable": false,
    "lyra2rev2-cutoffenable": false
}

What happens with new firmware?

I didn't see anything substantial change with the new firmware.  I just copied yours into my miner.json file, and restarted, but got no change.  There is no hashing at all and it still says "offline" in the upper left and won't do anything...  I have to get up early tomorrow so have to call it a night, but will troubleshoot again tomorrow.  I appreciate all the assistance so far!

[onegiantcock]

Try setting your first pool to something other than nicehash.
also noticed: -check-testnonce": false, w/ #xnsub added.

[rackserver]

Hello all,

I couldn't see 70-80 USD revenue fro my ZIG Z1. Is there anyone who can advice about best uptodate Z1 pool?

I'm running my Z1's on Nicehash and miningpoolhub but i only see $50 approxiamtely for a day.

PS:I'm mining Monacoin.
 

Try to miningpoolhub. that is a good pool.
from where have you bought it?
thanks.

[mattaero]

Try setting your first pool to something other than nicehash.
also noticed: -check-testnonce": false, w/ #xnsub added.

BAH this is so frustrating.

I created a new boot drive using an extra USB I had laying around, and literally nothing happens when I put it in except the fans turning on.

The red light appears to always be on or flashing as well.  I think I got a defective one. 

Anyone know how I contact Dayun to try and send it in?

[mattaero]

Try setting your first pool to something other than nicehash.
also noticed: -check-testnonce": false, w/ #xnsub added.

BAH this is so frustrating.

I created a new boot drive using an extra USB I had laying around, and literally nothing happens when I put it in except the fans turning on.

The red light appears to always be on or flashing as well.  I think I got a defective one. 

Anyone know how I contact Dayun to try and send it in?

Well I finally got it working (ish)  It had to do with requiring a static IP vs a dynamic one.  I had to go into my router and set a static IP and then followed a video sent by my chinese supplier (which was super helpful) to set it up.

NOW I just have a bunch of rejected shares at Suprnova... fml.