Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner

[Mordred80]

About HDAC you guys are talking about...

They did a algo-swap from Lyra2Rev2 to Skunk
Source: https://hdactech.com/en/News/news.do?mode=view&articleNo=6951

Quote: The change will be applied from block number 151,880, and it will be applied on (GMT + 9) October 22, 2018.

All the guys mining there did just come "here" to us.
That's why the hashrate went up...

Just asking myself how this coin had this hashpower...anyway.
It is what it is....

[1715310478]

1715310478

[1715310478]

1715310478

[1715310478]

1715310478

[flexmeister]

Everything went down the drain just 30 minutes after I paid for another Z1+ 

[Mordred80]

How to change the JSON file, what are the recommended changes?
thanks

You can export the config file (miner.json) from the settings page of your miner. In that file you can change the value of the frequency (MHz).
To edit the file, i use a tool called "Visual Studio Code" You don't need this tool cuz you can edit the file with the Windows Editor.
After you edited the file, you can upload it back to the miner over the Settings page -> miner reboots.

Change the value of auto_frequent from 0 to 1: "auto_frequent":"1"
Change the value of frequency from 900 to 950 or 1000: "frequency":"900" or "frequency":"1000"

Only do this changes after you upgraded your firmware to version 20180930 or higher.

[christiano88]

What happens if you do them before?

[Mordred80]

What happens if you do them before?

Not much...it just dosen't work.
The miner accepts the new settings, like a higher frequency, it shows the higher frequency on the main page of the miner, but it still mines with the default frequency of 900 MHz.

[metnet]

How to change the JSON file, what are the recommended changes?
thanks

You can export the config file (miner.json) from the settings page of your miner. In that file you can change the value of the frequency (MHz).
To edit the file, i use a tool called "Visual Studio Code" You don't need this tool cuz you can edit the file with the Windows Editor.
After you edited the file, you can upload it back to the miner over the Settings page -> miner reboots.

Change the value of auto_frequent from 0 to 1: "auto_frequent":"1"
Change the value of frequency from 900 to 950 or 1000: "frequency":"900" or "frequency":"1000"

Only do this changes after you upgraded your firmware to version 20180930 or higher.

Hi Mordred80,

i could not see auto_frequent variable in /var/www/html/resources/cgminer.config (that is JSON shown in interface)

would you please show them on config file. i am using 2018/30/09 version.

thanks in advance.

[Mordred80]

Hi Mordred80,

i could not see auto_frequent variable in /var/www/html/resources/cgminer.config (that is JSON shown in interface)

would you please show them on config file. i am using 2018/30/09 version.

thanks in advance.

Hey metnet

Look, i've never tried to access the file the way you do it. So i can't tell you why you don't see the "auto_frequent" option.
What i can tell you is, that "auto_frequent" is the first option you see when you open the miner.json file.

This is how the file looks like when you export it from the miner setting page (miner.json):

{"auto_frequent":"0","frequency":"900","check_nonce_submit":"1","auto_restart_miner":"1","restart_lower_limit_hashrate_5m":"4","restart_hw_count_30s":"74","auto_stop_miner":"1",
"stop_lower_fanspeed_in":"2000","stop_lower_fanspeed_out":"2000","stop_high_temperature":"70","temperature_unit":"c","refresh_time":"60","system_timezone":"Europe\/Zurich",
"system_hostname":"dayun","system_protocol":"static","system_ip":"192.168.1.222","system_netmask":"255.255.255.0","system_gateway":"192.168.1.1","system_dns_server":"192.168.1.1",
"pools":[{"id":130,"url":"stratum+tcp:\/\/lyra2rev2.eu.nicehash.com:3347","username":"xxxxxxxxxx","password":"x"},{"id":131,"url":"stratum+tcp:\/\/lyra2rev2.usa.nicehash.com:3347","username":"xxxxxxxxxx","password":"x"},
{"id":132,"url":"stratum+tcp:\/\/lyra2rev2.jp.nicehash.com:3347","username":"xxxxxxxxxx","password":"x"}],"user":{"id":15,"username":"xxxxx","password":"xxxxxxxxxx"}

[hobbyguy242]

I need help in a bad way.

I cant find the IP address of the Miner. I looked at the troubleshooting on their website and some info on this thread. All I get is a flashing red light where the firmware LED is. (I have the Z1+)

[m3y5am]

my version is20180926, Where i can find 20180930 or higher?

How to change the JSON file, what are the recommended changes?
thanks

Only do this changes after you upgraded your firmware to version 20180930 or higher.

[metnet]

Hi Mordred80,

i could not see auto_frequent variable in /var/www/html/resources/cgminer.config (that is JSON shown in interface)

would you please show them on config file. i am using 2018/30/09 version.

thanks in advance.

Hey metnet

Look, i've never tried to access the file the way you do it. So i can't tell you why you don't see the "auto_frequent" option.
What i can tell you is, that "auto_frequent" is the first option you see when you open the miner.json file.

This is how the file looks like when you export it from the miner setting page (miner.json):

{"auto_frequent":"0","frequency":"900","check_nonce_submit":"1","auto_restart_miner":"1","restart_lower_limit_hashrate_5m":"4","restart_hw_count_30s":"74","auto_stop_miner":"1",
"stop_lower_fanspeed_in":"2000","stop_lower_fanspeed_out":"2000","stop_high_temperature":"70","temperature_unit":"c","refresh_time":"60","system_timezone":"Europe\/Zurich",
"system_hostname":"dayun","system_protocol":"static","system_ip":"192.168.1.222","system_netmask":"255.255.255.0","system_gateway":"192.168.1.1","system_dns_server":"192.168.1.1",
"pools":[{"id":130,"url":"stratum+tcp:\/\/lyra2rev2.eu.nicehash.com:3347","username":"xxxxxxxxxx","password":"x"},{"id":131,"url":"stratum+tcp:\/\/lyra2rev2.usa.nicehash.com:3347","username":"xxxxxxxxxx","password":"x"},
{"id":132,"url":"stratum+tcp:\/\/lyra2rev2.jp.nicehash.com:3347","username":"xxxxxxxxxx","password":"x"}],"user":{"id":15,"username":"xxxxx","password":"xxxxxxxxxx"}

thanks i see

[Mordred80]

my version is20180926, Where i can find 20180930 or higher?

Version 20180930
https://drive.google.com/drive/folders/1Y1YXEgEnIFVnmzmD7PaTAMrVEDikTrfR

[Mordred80]

I need help in a bad way.

I cant find the IP address of the Miner. I looked at the troubleshooting on their website and some info on this thread. All I get is a flashing red light where the firmware LED is. (I have the Z1+)

You (your home network) are probably not in the same ip range as the miner.
The miner has by default a 192.168.1.xxx ip address.

If your home network is in the 10.x.x.x , 192.168.0.x or any other range, you won't be able to find the miner.

[Truthchanter]

Anyone buy this in the past week? Wondering if I'm too late to the game to go in for one

[coincalculators.io]

You can check which coins to mine.

https://www.coincalculators.io/hardware/product/?name=dayun-zig-z1

[hobbyguy242]

my version is20180926, Where i can find 20180930 or higher?

Version 20180930
https://drive.google.com/drive/folders/1Y1YXEgEnIFVnmzmD7PaTAMrVEDikTrfR

How do I update the firmware if I am on a Mac?

[Phuripat]

I have OC to 1025 and fixed frequency (auto frequence 0)... very great and stable around 6.8-7.0Gh/sec

[Phuripat]

official web site: http://www.zigminer.com/index.html still underconstruction
and source of download firmware is http://download.zigminer.com/

้the other website is spam!!!
https://dayun.company/
http://www.dayunmining.com/

[revenant2017]

About HDAC you guys are talking about...

They did a algo-swap from Lyra2Rev2 to Skunk
Source: https://hdactech.com/en/News/news.do?mode=view&articleNo=6951

Quote: The change will be applied from block number 151,880, and it will be applied on (GMT + 9) October 22, 2018.

All the guys mining there did just come "here" to us.
That's why the hashrate went up...

Just asking myself how this coin had this hashpower...anyway.
It is what it is....

Too bad. They occupied more than 50% of the Vertcoin network. Is this from a single mining pool or are they scattered everywhere?

[christiano88]

It is EVERYWHERE...

[Truthchanter]

Where do you guys recommend buying this from?