MoneroCrusher
Jr. Member
Offline
Activity: 88
Merit: 1
|
|
November 02, 2018, 03:34:25 AM Last edit: November 02, 2018, 03:57:48 AM by MoneroCrusher |
|
Team Red Miner v0.3.6 releasedhttps://github.com/todxx/teamredminer/releasesChanges in v0.3.6 - Added support for Rx550 cards (gfx804).
- Improved stability on larger rigs, especially with weaker cpus.
- Improved error reporting on failed initialization.
Hopefully this is another step to achieving stability on larger rigs, especially with weaker cpus. It has been tested by one of the forum users who had both early initialization issues, then stability issues. His rigs have gone from crashing every 30-120 mins to running smoothly for 15+ hours except for (I think) a single crash due to insufficient voltage. I believe we have more work to do though, we'll monitor carefully and try to address all problems that appear. For people with specific startup issues that are willing to help us nail them down and solve them, please reach out to me with a PM. The ANN post will be updated shortly by todxx. Linux kernel 4.13, 16.60 driver getting this with 12 RX 550 Lexa Pro in rig [2018-11-02 04:33:39] Stats GPU 0 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 1 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 2 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 3 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 4 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 5 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 6 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 7 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 8 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 9 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU10 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU11 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats Total - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s [2018-11-02 04:33:39] Pool pool.supportxmr.com received new job. (job_id: cRROY+SGvbG/T+sPA/wgUhFRvJDF) [2018-11-02 04:33:39] Pool pool.supportxmr.com set difficulty to 5000 still nothing after 5 minutes... compared it to my Vega rig and there it says "successfully initited…". It never does that with the RX 550 on Linux. So it never finishes initialization. I tried 1 card on Windows, there it worked.
|
|
|
|
todxx (OP)
Member
Offline
Activity: 176
Merit: 76
|
|
November 02, 2018, 04:03:14 AM |
|
Team Red Miner v0.3.6 releasedhttps://github.com/todxx/teamredminer/releasesChanges in v0.3.6 - Added support for Rx550 cards (gfx804).
- Improved stability on larger rigs, especially with weaker cpus.
- Improved error reporting on failed initialization.
Hopefully this is another step to achieving stability on larger rigs, especially with weaker cpus. It has been tested by one of the forum users who had both early initialization issues, then stability issues. His rigs have gone from crashing every 30-120 mins to running smoothly for 15+ hours except for (I think) a single crash due to insufficient voltage. I believe we have more work to do though, we'll monitor carefully and try to address all problems that appear. For people with specific startup issues that are willing to help us nail them down and solve them, please reach out to me with a PM. The ANN post will be updated shortly by todxx. Linux kernel 4.13, 16.60 driver getting this with 12 RX 550 Lexa Pro in rig [2018-11-02 04:33:39] Stats GPU 0 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 1 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 2 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 3 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 4 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 5 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 6 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 7 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 8 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 9 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU10 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU11 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats Total - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s [2018-11-02 04:33:39] Pool pool.supportxmr.com received new job. (job_id: cRROY+SGvbG/T+sPA/wgUhFRvJDF) [2018-11-02 04:33:39] Pool pool.supportxmr.com set difficulty to 5000 still nothing after 5 minutes... compared it to my Vega rig and there it says "successfully initited…". It never does that with the RX 550 on Linux. So it never finishes initialization. I tried 1 card on Windows, there it worked. Hey MoneroCrusher, Those 16.60 drivers are a bit out of date. All of the linux testing we've done has been with 18.30+ drivers on ubuntu 18.04. Would it be possible for you to test with 18.30 or 18.40 drivers on an Ubuntu 18.04 install?
|
|
|
|
cryptomanman
Newbie
Offline
Activity: 24
Merit: 0
|
|
November 02, 2018, 04:27:06 AM |
|
This is exactly the symptoms I get. Never finishes initializing the card/s. These are the configurations on which I'm having failures with teamredminer 3.5.0 and 3.6.0 -- IBM X36550-M3, Ubuntu server 16.04, kernel 4.4, amdgpu-pro 17.30, 2x MSI Radeon RX560 Aero 4GB HP z600, Ubuntu server 16.04 and 18.04, kernel 4.4 and 4.15, amdgpu-pro 17.30 and 18.30, ASUS ROG Strix RX570 4GB Currently have 2 6GPU boxes with much less robust CPU's running just great and at least 1 of the z600's is also running great with teamredminer 3.5.0. Tried watching journalctl when starting the miner. No errors noted. And again, xmr-stak is very stable on these systems, just not as high hashrate. Team Red Miner v0.3.6 releasedhttps://github.com/todxx/teamredminer/releasesChanges in v0.3.6 - Added support for Rx550 cards (gfx804).
- Improved stability on larger rigs, especially with weaker cpus.
- Improved error reporting on failed initialization.
Hopefully this is another step to achieving stability on larger rigs, especially with weaker cpus. It has been tested by one of the forum users who had both early initialization issues, then stability issues. His rigs have gone from crashing every 30-120 mins to running smoothly for 15+ hours except for (I think) a single crash due to insufficient voltage. I believe we have more work to do though, we'll monitor carefully and try to address all problems that appear. For people with specific startup issues that are willing to help us nail them down and solve them, please reach out to me with a PM. The ANN post will be updated shortly by todxx. Linux kernel 4.13, 16.60 driver getting this with 12 RX 550 Lexa Pro in rig [2018-11-02 04:33:39] Stats GPU 0 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 1 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 2 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 3 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 4 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 5 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 6 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 7 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 8 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 9 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU10 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU11 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats Total - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s [2018-11-02 04:33:39] Pool pool.supportxmr.com received new job. (job_id: cRROY+SGvbG/T+sPA/wgUhFRvJDF) [2018-11-02 04:33:39] Pool pool.supportxmr.com set difficulty to 5000 still nothing after 5 minutes... compared it to my Vega rig and there it says "successfully initited…". It never does that with the RX 550 on Linux. So it never finishes initialization. I tried 1 card on Windows, there it worked.
|
|
|
|
MoneroCrusher
Jr. Member
Offline
Activity: 88
Merit: 1
|
|
November 02, 2018, 04:35:11 AM Last edit: November 02, 2018, 05:03:04 AM by MoneroCrusher |
|
Team Red Miner v0.3.6 releasedhttps://github.com/todxx/teamredminer/releasesChanges in v0.3.6 - Added support for Rx550 cards (gfx804).
- Improved stability on larger rigs, especially with weaker cpus.
- Improved error reporting on failed initialization.
Hopefully this is another step to achieving stability on larger rigs, especially with weaker cpus. It has been tested by one of the forum users who had both early initialization issues, then stability issues. His rigs have gone from crashing every 30-120 mins to running smoothly for 15+ hours except for (I think) a single crash due to insufficient voltage. I believe we have more work to do though, we'll monitor carefully and try to address all problems that appear. For people with specific startup issues that are willing to help us nail them down and solve them, please reach out to me with a PM. The ANN post will be updated shortly by todxx. Linux kernel 4.13, 16.60 driver getting this with 12 RX 550 Lexa Pro in rig [2018-11-02 04:33:39] Stats GPU 0 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 1 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 2 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 3 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 4 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 5 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 6 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 7 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 8 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 9 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU10 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU11 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats Total - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s [2018-11-02 04:33:39] Pool pool.supportxmr.com received new job. (job_id: cRROY+SGvbG/T+sPA/wgUhFRvJDF) [2018-11-02 04:33:39] Pool pool.supportxmr.com set difficulty to 5000 still nothing after 5 minutes... compared it to my Vega rig and there it says "successfully initited…". It never does that with the RX 550 on Linux. So it never finishes initialization. I tried 1 card on Windows, there it worked. Hey MoneroCrusher, Those 16.60 drivers are a bit out of date. All of the linux testing we've done has been with 18.30+ drivers on ubuntu 18.04. Would it be possible for you to test with 18.30 or 18.40 drivers on an Ubuntu 18.04 install? Hey Todxx I quickly installed 18.40 driver and now it seems to work. All 12 GPUs initialized & started mining. The bad news: the hashrate is lower than on xmr-stak with 16.60 driver. For RX 550 the best driver is by far the 16.60 drivers. Could you maybe look into this, to make it work with 16.60 driver? On the other hand: with the 18.40 driver xmr-stak instantly crashes the driver upon starting. Also tested with 17.40 drivers which is reasonably comparable with 16.60 drivers. xmr-stak: ~5100 H/s for 12 RX 550 Sapphire Lexa teamredminer: ~5000 H/s for 12 RX 550 Sapphire Lexa Same settings. Not running this at max settings, if I really push it I can reach 480-500 H/s but the bad silicon ones (1-2 in each rig will crash). Could you guys finetune RX 550/560 a little more? I could also provide some RX 550/560 + SSH connection if you need to test. I got various models.
|
|
|
|
todxx (OP)
Member
Offline
Activity: 176
Merit: 76
|
|
November 02, 2018, 05:06:17 AM |
|
This is exactly the symptoms I get. Never finishes initializing the card/s. These are the configurations on which I'm having failures with teamredminer 3.5.0 and 3.6.0 -- IBM X36550-M3, Ubuntu server 16.04, kernel 4.4, amdgpu-pro 17.30, 2x MSI Radeon RX560 Aero 4GB HP z600, Ubuntu server 16.04 and 18.04, kernel 4.4 and 4.15, amdgpu-pro 17.30 and 18.30, ASUS ROG Strix RX570 4GB Currently have 2 6GPU boxes with much less robust CPU's running just great and at least 1 of the z600's is also running great with teamredminer 3.5.0. Tried watching journalctl when starting the miner. No errors noted. And again, xmr-stak is very stable on these systems, just not as high hashrate. Team Red Miner v0.3.6 releasedhttps://github.com/todxx/teamredminer/releasesChanges in v0.3.6 - Added support for Rx550 cards (gfx804).
- Improved stability on larger rigs, especially with weaker cpus.
- Improved error reporting on failed initialization.
Hopefully this is another step to achieving stability on larger rigs, especially with weaker cpus. It has been tested by one of the forum users who had both early initialization issues, then stability issues. His rigs have gone from crashing every 30-120 mins to running smoothly for 15+ hours except for (I think) a single crash due to insufficient voltage. I believe we have more work to do though, we'll monitor carefully and try to address all problems that appear. For people with specific startup issues that are willing to help us nail them down and solve them, please reach out to me with a PM. The ANN post will be updated shortly by todxx. Linux kernel 4.13, 16.60 driver getting this with 12 RX 550 Lexa Pro in rig [2018-11-02 04:33:39] Stats GPU 0 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 1 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 2 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 3 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 4 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 5 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 6 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 7 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 8 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 9 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU10 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU11 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats Total - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s [2018-11-02 04:33:39] Pool pool.supportxmr.com received new job. (job_id: cRROY+SGvbG/T+sPA/wgUhFRvJDF) [2018-11-02 04:33:39] Pool pool.supportxmr.com set difficulty to 5000 still nothing after 5 minutes... compared it to my Vega rig and there it says "successfully initited…". It never does that with the RX 550 on Linux. So it never finishes initialization. I tried 1 card on Windows, there it worked. Hey cryptomanman, It's strange that you're having issues with that RX 570. So far I've only see initialization issues on with Vegas when running 18.30 and newer drivers. Can you try to run the miner again and see if there are any amdgpu/drm errors reported by the kernel driver? With Vegas I've noticed that the driver will occasionally have problems and report tons of errors in dmesg/kernel logs.
|
|
|
|
todxx (OP)
Member
Offline
Activity: 176
Merit: 76
|
|
November 02, 2018, 05:18:01 AM |
|
Hey Todxx I quickly installed 18.40 driver and now it seems to work. All 12 GPUs initialized & started mining. The bad news: the hashrate is lower than on xmr-stak with 16.60 driver. For RX 550 the best driver is by far the 16.60 drivers. Could you maybe look into this, to make it work with 16.60 driver? On the other hand: with the 18.40 driver xmr-stak instantly crashes the driver upon starting.
Also tested with 17.40 drivers which is reasonably comparable with 16.60 drivers. xmr-stak: ~5100 H/s for 12 RX 550 Sapphire Lexa teamredminer: ~5000 H/s for 12 RX 550 Sapphire Lexa Same settings.
Not running this at max settings, if I really push it I can reach 480-500 H/s but the bad silicon ones (1-2 in each rig will crash). Could you guys finetune RX 550/560 a little more? I could also provide some RX 550/560 + SSH connection if you need to test. I got various models.
I'm afraid you hit a bit of a short coming of our tuning with the RX 550s/560s . We only got a couple 550s and 560s to test with about a week ago, and we haven't been able to do much tuning for them yet. Thank you for the kind offer of ssh access, we might just take you up on it I'll sync up with kerney tomorrow and we'll make a game plan for addressing the RX 550/560 tuning. Btw, which cn_config setting did you use for the 550s?
|
|
|
|
MoneroCrusher
Jr. Member
Offline
Activity: 88
Merit: 1
|
|
November 02, 2018, 05:39:43 AM |
|
I'm afraid you hit a bit of a short coming of our tuning with the RX 550s/560s . We only got a couple 550s and 560s to test with about a week ago, and we haven't been able to do much tuning for them yet. Thank you for the kind offer of ssh access, we might just take you up on it I'll sync up with kerney tomorrow and we'll make a game plan for addressing the RX 550/560 tuning. Btw, which cn_config setting did you use for the 550s? Ok great, hope you can work something out! I just checked, there's absolutely no difference in performance between driver 17.40 and 16.60, but 17.40 works for both xmr-stak and teamredminer. I did default (2+2) and also tried 3+3 (same hashrate), 2+3 (same hashrate), 4+4 (GPU/driver crash). The RX 550 I tried were the ones with 8 CU. The Baffin ones have 10 CU fyi.
|
|
|
|
Sx5000
Jr. Member
Offline
Activity: 31
Merit: 5
|
|
November 02, 2018, 05:55:07 AM |
|
Everything works fine on rx552 baffin 12cu (unlock). Statistics for 48 hours, 1000/1800, teamred 0.3.4, 610w/wall http://prntscr.com/ldeosyThanks for your work, devs! PS: Can I have some more hashes for these babies?
|
|
|
|
cryptomanman
Newbie
Offline
Activity: 24
Merit: 0
|
|
November 02, 2018, 06:37:43 AM |
|
This is exactly the symptoms I get. Never finishes initializing the card/s. These are the configurations on which I'm having failures with teamredminer 3.5.0 and 3.6.0 -- IBM X36550-M3, Ubuntu server 16.04, kernel 4.4, amdgpu-pro 17.30, 2x MSI Radeon RX560 Aero 4GB HP z600, Ubuntu server 16.04 and 18.04, kernel 4.4 and 4.15, amdgpu-pro 17.30 and 18.30, ASUS ROG Strix RX570 4GB Currently have 2 6GPU boxes with much less robust CPU's running just great and at least 1 of the z600's is also running great with teamredminer 3.5.0. Tried watching journalctl when starting the miner. No errors noted. And again, xmr-stak is very stable on these systems, just not as high hashrate. Team Red Miner v0.3.6 releasedhttps://github.com/todxx/teamredminer/releasesChanges in v0.3.6 - Added support for Rx550 cards (gfx804).
- Improved stability on larger rigs, especially with weaker cpus.
- Improved error reporting on failed initialization.
Hopefully this is another step to achieving stability on larger rigs, especially with weaker cpus. It has been tested by one of the forum users who had both early initialization issues, then stability issues. His rigs have gone from crashing every 30-120 mins to running smoothly for 15+ hours except for (I think) a single crash due to insufficient voltage. I believe we have more work to do though, we'll monitor carefully and try to address all problems that appear. For people with specific startup issues that are willing to help us nail them down and solve them, please reach out to me with a PM. The ANN post will be updated shortly by todxx. Linux kernel 4.13, 16.60 driver getting this with 12 RX 550 Lexa Pro in rig [2018-11-02 04:33:39] Stats GPU 0 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 1 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 2 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 3 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 4 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 5 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 6 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 7 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 8 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU 9 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU10 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats GPU11 - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s 0/0 [2018-11-02 04:33:39] Stats Total - cnv8: 0.0 h/s, avg 0.0 h/s, pool 0.0 h/s [2018-11-02 04:33:39] Pool pool.supportxmr.com received new job. (job_id: cRROY+SGvbG/T+sPA/wgUhFRvJDF) [2018-11-02 04:33:39] Pool pool.supportxmr.com set difficulty to 5000 still nothing after 5 minutes... compared it to my Vega rig and there it says "successfully initited…". It never does that with the RX 550 on Linux. So it never finishes initialization. I tried 1 card on Windows, there it worked. Hey cryptomanman, It's strange that you're having issues with that RX 570. So far I've only see initialization issues on with Vegas when running 18.30 and newer drivers. Can you try to run the miner again and see if there are any amdgpu/drm errors reported by the kernel driver? With Vegas I've noticed that the driver will occasionally have problems and report tons of errors in dmesg/kernel logs. todxx, So far, I only have 1 RX570 working in my server / workstation hardware. (BTW, previous version with lyra2z worked fine. 3.1, I think) Other RX570's in my celeron 6 card rig working great. Here is dmesg from a failing machine. FYI it's the whole thing since I don't know what parts will be helpful to you. Also, these machines boot up from PXE and xmr-stak starts by default. I went in and manually stopped it and started teamredminer before capturing the log. (Same workflow for working and non-working rigs) https://pastebin.com/eVszbM85
|
|
|
|
MoneroCrusher
Jr. Member
Offline
Activity: 88
Merit: 1
|
|
November 02, 2018, 06:41:23 AM |
|
Everything works fine on rx552 baffin 12cu (unlock). Statistics for 48 hours, 1000/1800, teamred 0.3.4, 610w/wall http://prntscr.com/ldeosyThanks for your work, devs! PS: Can I have some more hashes for these babies? wow nice! whats the power draw from the wall? How did you unlock the additional 2 CUs?
|
|
|
|
todxx (OP)
Member
Offline
Activity: 176
Merit: 76
|
|
November 02, 2018, 07:04:03 AM |
|
todxx, So far, I only have 1 RX570 working in my server / workstation hardware. (BTW, previous version with lyra2z worked fine. 3.1, I think) Other RX570's in my celeron 6 card rig working great. Here is dmesg from a failing machine. FYI it's the whole thing since I don't know what parts will be helpful to you. Also, these machines boot up from PXE and xmr-stak starts by default. I went in and manually stopped it and started teamredminer before capturing the log. (Same workflow for working and non-working rigs) https://pastebin.com/eVszbM85There's a few errors reported by the amdgpu driver. Some of these I remember seeing in older drivers that I thought were now fixed. Is this the 18.30 driver or the 17.30 driver?
|
|
|
|
cryptomanman
Newbie
Offline
Activity: 24
Merit: 0
|
|
November 02, 2018, 07:28:42 AM |
|
todxx, So far, I only have 1 RX570 working in my server / workstation hardware. (BTW, previous version with lyra2z worked fine. 3.1, I think) Other RX570's in my celeron 6 card rig working great. Here is dmesg from a failing machine. FYI it's the whole thing since I don't know what parts will be helpful to you. Also, these machines boot up from PXE and xmr-stak starts by default. I went in and manually stopped it and started teamredminer before capturing the log. (Same workflow for working and non-working rigs) https://pastebin.com/eVszbM85There's a few errors reported by the amdgpu driver. Some of these I remember seeing in older drivers that I thought were now fixed. Is this the 18.30 driver or the 17.30 driver? That log was Ubuntu 16.04, kernel 4.4, amdgpu-pro 17.30. I'll try and find time to spin up the other PXE server with 18.30 tomorrow and put up the log. Thanks for all the work!
|
|
|
|
misterkit
Newbie
Offline
Activity: 47
Merit: 0
|
|
November 02, 2018, 10:05:44 AM |
|
I have a mix of vega 56s and 64s. I did not specify an intensity in the .bat file. What do they default to?
|
|
|
|
pbfarmer
Member
Offline
Activity: 340
Merit: 29
|
|
November 02, 2018, 10:15:23 AM |
|
I have a mix of vega 56s and 64s. I did not specify an intensity in the .bat file. What do they default to?
You can see it in the output when the miner starts. At least for a 64, it's 16+14
|
|
|
|
dragonmike
|
|
November 02, 2018, 11:42:10 AM |
|
I'm going to run it on my 6xVega rig for a while. It's on a riserless Onda D1800 board sporting a very shitty CPU so if there are any bottlenecks, I guess I'll see them happening.
At the moment it's chugging along at 12.2kh/s with less than 20% CPU usage.
24 hours later, zero crashes, no slowdowns. CPU usage at 10%. I then increased core clocks by 40Mhz to gauge the difference. 100W more total power draw at increased voltage and the gains, while non negligible, were still too marginal to make up for the difference, imo.
|
|
|
|
nordmann666
Member
Offline
Activity: 363
Merit: 16
|
|
November 02, 2018, 02:10:25 PM |
|
anybody with hasrates for 470 and / or 570 4GB?
|
|
|
|
kerney666
Member
Offline
Activity: 658
Merit: 86
|
|
November 02, 2018, 02:20:52 PM |
|
anybody with hasrates for 470 and / or 570 4GB?
Naturally it’d be better for other forum members to provide their verified hashrates, but fwiw the 470/570 4GBs in our tests often reached the 1000+ h/s mark, many times a tad more. Some were stuck at ~850 h/s for all miners. It depends on your core clk as well as mem clk. Power draw should still be fine with a higher core clk. The configs to use are 7+7 and 8+7. Higher won’t work. Cheers, K
|
|
|
|
FablomsFDP
Newbie
Offline
Activity: 10
Merit: 0
|
|
November 02, 2018, 02:26:00 PM |
|
Please tell me how this amount is obtained Pool xmr-eu2.nanopool.org share accepted. (GPU0) (154/151/1) 151 + 1 = 152 but not 154! Or something I do not understand? Well, either it was followed immediately by two more output lines with shares found in the same enqueued work so the (global) total counter was already increased with +2 more shares, or we have a bug, or it's also possible that either the stratum communication with the pool is messed up or the nanopool themselves messed up and never responded for two of your shares. The first counter is incremented when shares are found, the last two when the pool reports back and we know the accepted/rejected status. Do you see it continuously, i.e. for your GPU0 you're always missing two shares (unless you've restarted already)? [2018-11-02 13:43:27] Pool xmr-eu2.nanopool.org received new job. (job_id: 1998) [2018-11-02 13:43:27] Pool xmr-eu2.nanopool.org share rejected. (GPU0) Error code: -1 - Block expired (438/425/9) [2018-11-02 13:43:39] Pool xmr-eu2.nanopool.org share accepted. (GPU0) (439/426/9) [2018-11-02 13:43:52] Stats GPU 0 - cnv8: 2.310kh/s, avg 2.340kh/s, pool 2.387kh/s 426/9 [2018-11-02 13:44:22] Stats GPU 0 - cnv8: 2.310kh/s, avg 2.340kh/s, pool 2.383kh/s 426/9 [2018-11-02 13:44:25] Pool xmr-eu2.nanopool.org received new job. (job_id: 1999) [2018-11-02 13:44:41] Pool xmr-eu2.nanopool.org share accepted. (GPU0) (440/427/9) [2018-11-02 13:44:52] Stats GPU 0 - cnv8: 2.310kh/s, avg 2.340kh/s, pool 2.385kh/s 427/9 Even when I restarted, these "unrecorded shares" still appear. The total percentage of them is not more than 2.
|
|
|
|
nordmann666
Member
Offline
Activity: 363
Merit: 16
|
|
November 02, 2018, 02:44:17 PM |
|
anybody with hasrates for 470 and / or 570 4GB?
Naturally it’d be better for other forum members to provide their verified hashrates, but fwiw the 470/570 4GBs in our tests often reached the 1000+ h/s mark, many times a tad more. Some were stuck at ~850 h/s for all miners. It depends on your core clk as well as mem clk. Power draw should still be fine with a higher core clk. The configs to use are 7+7 and 8+7. Higher won’t work. Cheers, K ok..so not a big impact on v2 like on heavy (where 8GB is much better)
|
|
|
|
dragonmike
|
|
November 02, 2018, 02:54:49 PM |
|
anybody with hasrates for 470 and / or 570 4GB?
ASUS RX570 Expedition OC (modded Elpida bios) clocked at 1225/1940 yields just under 1kh/s. cn_config 7+7. 8+7 seems to be slower. You've got to give it a go and see for yourself which config will work best, but the above is a pretty safe bet.
|
|
|
|
|