Rickirs
Member
Offline
Activity: 206
Merit: 20
|
|
November 03, 2021, 11:31:51 AM |
|
How to disable showing "new job" line ?
|
|
|
|
dedizonesv2
Jr. Member
Offline
Activity: 152
Merit: 3
|
|
November 03, 2021, 07:11:41 PM |
|
How to disable showing "new job" line ?
he does not respond here or on the github I asked how to remove summary because it spam my console and I do not see that gpu is causing problems, I am waiting for a response. https://github.com/NebuTech/NBMiner/issues/530
|
|
|
|
wishxy
|
|
November 07, 2021, 05:05:20 AM |
|
When FLUX?
|
|
|
|
doctorman
Newbie
Offline
Activity: 35
Merit: 0
|
|
November 12, 2021, 05:00:09 PM |
|
How can I see the Dev fees taken?
I tried log verbose and I could not find any other worker or wallet reported but mine, how does NBminer take dev fees?
|
|
|
|
doctorman
Newbie
Offline
Activity: 35
Merit: 0
|
|
November 14, 2021, 08:16:19 PM |
|
no one is answering, the Telegram group is all Chinese and no answer can we set DEV Fee in NBminer to 0.65 instead of 1? does it have to be full integer or can it be also partial? Also the BotFarm here is updated to support NBminer https://bitcointalk.org/index.php?topic=2071108.0check it out, very handy to set the afterburner and make sure all is working
|
|
|
|
ramowarr
Newbie
Offline
Activity: 3
Merit: 0
|
|
November 16, 2021, 06:53:14 PM |
|
im facing with cpu usage %100 when mining nbminer I have never seen this before . i have six cards in rig CPU: Ryzen 3 1200 RAM : 4 GB DDR4 someone got idea to fix it? https://i.hizliresim.com/aktszoq.png
|
|
|
|
DRFTA
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 17, 2021, 01:03:10 PM Last edit: November 17, 2021, 05:24:52 PM by mprep |
|
im facing with cpu usage %100 when mining nbminer
I have never seen this before . i have six cards in rig
CPU: Ryzen 3 1200 RAM : 4 GB DDR4
someone got idea to fix it?
If you have a Windows Rig go to Settings then System on the Display tab go down to Graphics settings, turn Hardware-accelerated GPU scheduling off. Restart your pc, and CPU usage should be right down now.
Using NBMiner v39.7 on one of my 6x3060 V2 lhr rigs. Getting 36.26MH/s to 36.80MH/s on all 6 3060 cards. miner says power draw of 706w but I would assume its around 850w-900w at the wall. Total Hash rate of NBMiner for 6 cards is 219MH/s and the Pool hash rate for the last 4 hours is 226MH/s, I'm quite impressed! Overclock setting on all 6 are 70% power, -502 core, +1300 mem, fan speed 90% (summer time) core temps are 45c,45c,42c,55c,46c,40c and memory junction temps are 58c,59c,54c,67c,56c,55c. If anyone has any tips to push them a little further, I'm keen to test it out! [moderator's note: consecutive posts merged]
|
|
|
|
ramowarr
Newbie
Offline
Activity: 3
Merit: 0
|
|
November 17, 2021, 04:11:13 PM |
|
im facing with cpu usage %100 when mining nbminer
I have never seen this before . i have six cards in rig
CPU: Ryzen 3 1200 RAM : 4 GB DDR4
someone got idea to fix it?
If you have a Windows Rig go to Settings then System on the Display tab go down to Graphics settings, turn Hardware-accelerated GPU scheduling off. Restart your pc, and CPU usage should be right down now. Thanks it works .
|
|
|
|
marmot14
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 18, 2021, 06:41:03 PM |
|
Question about NBMiner: I have a rig with 10 GPUs, currently running in LHR Mode 2 (Low Power Mode), as I have a couple of cards which run a bit on the hot side. However, I am missing out on hashrate as the other cards could be running in LHR Mode 1. Is there a way to set a custom LHR Mode for each card? Or somehow split the cards out into two groups in HiveOS?
|
|
|
|
deedeeranged
Member
Offline
Activity: 325
Merit: 42
|
|
November 19, 2021, 08:55:05 PM |
|
Question about NBMiner: I have a rig with 10 GPUs, currently running in LHR Mode 2 (Low Power Mode), as I have a couple of cards which run a bit on the hot side. However, I am missing out on hashrate as the other cards could be running in LHR Mode 1. Is there a way to set a custom LHR Mode for each card? Or somehow split the cards out into two groups in HiveOS?
I think it is possible with lolMiner afaik.
|
|
|
|
marmot14
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 21, 2021, 10:22:29 PM |
|
Question about NBMiner: I have a rig with 10 GPUs, currently running in LHR Mode 2 (Low Power Mode), as I have a couple of cards which run a bit on the hot side. However, I am missing out on hashrate as the other cards could be running in LHR Mode 1. Is there a way to set a custom LHR Mode for each card? Or somehow split the cards out into two groups in HiveOS?
I think it is possible with lolMiner afaik. Cheers! Will check it out
|
|
|
|
nebutech (OP)
Member
Offline
Activity: 134
Merit: 26
|
|
November 23, 2021, 03:12:39 AM |
|
new version updated
|
|
|
|
webhead
Newbie
Offline
Activity: 123
Merit: 0
|
|
November 23, 2021, 08:49:51 PM |
|
i use nbminer all the time but this new version just crashes and crashes and crashes , worst version yet 3.7 is iffy seems newer the version worse it gets sort it out will you , is it because my cards are on 4 into one splitters or something everything works great ish in 3.7 not your new one.
|
|
|
|
gemuga
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 24, 2021, 01:10:35 AM |
|
new version updated New version is crashing always for me after DAG verification, 39.7 is still working fine
|
|
|
|
mitak64
|
|
November 24, 2021, 01:54:43 AM |
|
new version updated New version is crashing always for me after DAG verification, 39.7 is still working fine Same here .
|
|
|
|
nebutech (OP)
Member
Offline
Activity: 134
Merit: 26
|
|
November 24, 2021, 03:27:11 AM |
|
new version updated New version is crashing always for me after DAG verification, 39.7 is still working fine fixed in 40.1
|
|
|
|
gemuga
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 24, 2021, 04:18:38 AM |
|
new version updated New version is crashing always for me after DAG verification, 39.7 is still working fine fixed in 40.1 Solved. Thank you.
|
|
|
|
gemuga
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 24, 2021, 04:28:56 AM |
|
btw is nebutech working on further improving LHR unlock? Is there a theoretical limit or do you target 100%? Thank you.
|
|
|
|
Timrye75
Newbie
Offline
Activity: 1
Merit: 0
|
|
November 26, 2021, 03:30:20 AM Last edit: November 26, 2021, 04:07:54 AM by Timrye75 |
|
I've been mining on Windows 10 since NBminer v 39.5 and I've had this problem with every version. The program just stops mining and restarts from the loop command in the batch file. Any idea what is causing this? It happens randomly. Sometimes it takes 30 minutes and sometimes2 minutes like below. Sometimes I've gotten up to 7 shares and it stops.
[22:27:23] INFO - ethash - New job: eth.2miners.com:2020, ID: e26bea0c, HEIGHT: 13687392, DIFF: 8.726G [22:27:26] INFO - ===================== [nbminer v40.1] Summary 2021-11-25 22:27:26 ===================== [22:27:26] INFO - |ID|Device|Hashrate|LHR|Accept|Reject|Inv|Powr|CTmp|MTmp|Fan|CClk|GMClk|MUtl|Eff/Watt| [22:27:26] INFO - | 0| 1060| 20.20 M | 0| 0| 0| 93| 53| | 78|1936| 3999| 100| 217.2 K| [22:27:26] INFO - |------------------+----+------+------+---+----+--------------------------------------| [22:27:26] INFO - | Total: 20.20 M| | 0| 0| 0| 93| Uptime: 0D 00:02:00 CPU: 10% | [22:27:26] INFO - ======================================================================================= [22:27:26] INFO - ethash - On Pool 10m: 0.000 4h: 0.000 24h: 0.000 [22:27:30] INFO - ethash - New job: eth.2miners.com:2020, ID: a5caec1a, HEIGHT: 13687392, DIFF: 8.726G [22:27:30] INFO - ethash - New job: eth.2miners.com:2020, ID: 55b852bd, HEIGHT: 13687392, DIFF: 8.726G [22:27:36] INFO - ethash - New job: eth.2miners.com:2020, ID: 05a89ba3, HEIGHT: 13687393, DIFF: 8.726G [22:27:36] INFO - ethash - New job: eth.2miners.com:2020, ID: fd0ebaa7, HEIGHT: 13687393, DIFF: 8.726G [22:27:43] INFO - ethash - New job: eth.2miners.com:2020, ID: f4fc0522, HEIGHT: 13687393, DIFF: 8.726G
C:\WINDOWS\system32>goto loop
C:\WINDOWS\system32>"C:\Program Files\Miners\NBMiner\nbminer.exe" -a ethash -o stratum+tcp://eth.2miners.com:2020 -u nano_1xfay41n8zf33h8t7ymxep8f19196rwea7wt5k8khzfpzj6hsndzpiri5us5.Tim1GPU [22:28:06] INFO - ---------------------------------------------- [22:28:06] INFO - | | [22:28:06] INFO - | | [22:28:06] INFO - | | [22:28:06] INFO - | | [22:28:06] INFO - | | [22:28:06] INFO - | | [22:28:06] INFO - | | [22:28:06] INFO - | NBMiner - Crypto GPU Miner | [22:28:06] INFO - | 40.1 |
|
|
|
|
webhead
Newbie
Offline
Activity: 123
Merit: 0
|
|
December 03, 2021, 03:24:59 PM |
|
hi does nbminer support cortex cukoo cycle if so how do i run that in config cheers , if not can you add it please many thanks.
|
|
|
|
|