List of useful Bitcoin block explorers

[GazetaBitcoin]

Added one more Bitcoin explorer

Learnmeabitcoin

Added to my list as well but it seems to be a little bit weird in terms of design and is quite different to "regular" Block explorers.

Thank you, ajiz138, for this new suggestion and to 1miau for the update. I added the new recommended website in the translated topic too, together with a few earlier updates.

@1miau: I think you forgot about this mention made by SFR:

Crystal explorer has decided to "indefinitely suspend" its operation ^{[one less source for law enforcement agencies to spy on]}!

I guess that Crystal explorer can be moved to the Removed block explorers list.

Excepting that, I think that something happened to OP after last update, as it lines appear to not be properly aligned anymore, below the lattest added explorer:



I guess I spotted the error in BBCode: after the segment related to Learnmeabitcoin.com ended -- meaning after the /tr from the end of its section, you added a "/table" and a "table" in the code -- this should be the reason for the improper alignment.

Oh and one more mention, if I may -- please take a look at the "No" of the Learnmeabitcoin.com -- the "No" standing in the column "SegWit identifiable?". This "No" appears with bold, unlike all the others from the table and it's missing the date (I guess 10/200). I hope this helps

[1714005175]

1714005175

[1714005175]

1714005175

[1714005175]

1714005175

[1714005175]

1714005175

[1miau]

Thank you, ajiz138, for this new suggestion and to 1miau for the update. I added the new recommended website in the translated topic too, together with a few earlier updates.

+1 

@1miau: I think you forgot about this mention made by SFR:

Crystal explorer has decided to "indefinitely suspend" its operation ^{[one less source for law enforcement agencies to spy on]}!

I guess that Crystal explorer can be moved to the Removed block explorers list.

You are right, somehow I missed it.
It's moved to "removed Blockexplorers" now. 

Excepting that, I think that something happened to OP after last update, as it lines appear to not be properly aligned anymore, below the lattest added explorer:



I guess I spotted the error in BBCode: after the segment related to Learnmeabitcoin.com ended -- meaning after the /tr from the end of its section, you added a "/table" and a "table" in the code -- this should be the reason for the improper alignment.

Ohhh nooooo!
Such an error has now occured several times after adding new lines to my OP and out of nowhere, my table was messed up. 
Suddenly, a new Table was started automatically, I didn't add it there, weird!
Happened 4 times already but the last times, I've edited it directly. 

Oh and one more mention, if I may -- please take a look at the "No" of the Learnmeabitcoin.com -- the "No" standing in the column "SegWit identifiable?". This "No" appears with bold, unlike all the others from the table and it's missing the date (I guess 10/200). I hope this helps

Done!
I've missed to check the OP after udpating it. 
That's also why the Table mistake wasn't edited on time... 

[GazetaBitcoin]

I guess that Crystal explorer can be moved to the Removed block explorers list.

You are right, somehow I missed it.
It's moved to "removed Blockexplorers" now.  

Thank you for confirming this. I also made the change in the translated topic.

Ohhh nooooo!
Such an error has now occured several times after adding new lines to my OP and out of nowhere, my table was messed up.  

Working with these BBCode tables is not an easy thing to do for sure. I mostly see it as repairing old clocks A lot of time it's needed, to pay attention to each line, each separator... For example, in the translated topic, the data from second column (the one related to bech32) doesn't fit on one line, as it happens in your OP. I never figured out why... And I copied exactly the BBCode from your OP. Perhaps, if you want to take a look and see yourself...? Maybe you have a suggestion...? Perhaps I misplaced an operator...? I have no idea.

Suddenly, a new Table was started automatically, I didn't add it there, weird!
Happened 4 times already but the last times, I've edited it directly.  

This is weird, indeed...

Done!
I've missed to check the OP after udpating it.  
That's also why the Table mistake wasn't edited on time...  

No worry, I am glad I could help Cheers!

[1miau]

I guess that Crystal explorer can be moved to the Removed block explorers list.

You are right, somehow I missed it.
It's moved to "removed Blockexplorers" now.  

Thank you for confirming this. I also made the change in the translated topic.

Much appreciated, as usually!  

A lot of time it's needed, to pay attention to each line, each separator... For example, in the translated topic, the data from second column (the one related to bech32) doesn't fit on one line, as it happens in your OP. I never figured out why... And I copied exactly the BBCode from your OP. Perhaps, if you want to take a look and see yourself...? Maybe you have a suggestion...? Perhaps I misplaced an operator...? I have no idea.

Most likely, we need more _ _ _ (but no stealing from o_e_l_e_o's name  ). Our _ _ _ are limiting column size here and I have removed 2 _ from Recunoaște adresele SegWit (P2SH)?* and removed 6 _ from Utilitate (scor subiectiv  ) + added 4_ in general, so we could add 12 _ to your column in question, and it should work like this (just replace in your translated topic our _ _ _ table row)

Nume (link)	Suportă bech32 / Bech32m (P2TR)?	Recunoaște adresele SegWit (P2SH)?*	Utilitate (scor subiectiv  )	Notă acordată de	Comentarii
__________________________	_______________________________	_________________________________	_________________________	________________	_________________________________________________________
Blockchair.com	Da (09/2019) / Da (05/2022)	Da (09/2019)	8 / 10 Puncte	1miau
Trezor Bitcoin Explorer	Da (11/2019) / Da (05/2022)	Da (11/2019)	7.5 / 10 Puncte	Saint-loup	Singurul, pe lângă Blockchair, care recunoaște chei zPub
mempool	Da (10/2020) / Da (05/2022)	Da (10/2020)	7.5 / 10 Puncte	SFR10	Interfață frumoasă și foarte detaliat

....


See code below:

Code:

[tr]
[td]__________________________[/td]
[td]_______________________________[/td]
[td]_________________________________[/td]
[td]_________________________[/td]
[td]________________[/td]
[td]_________________________________________________________[/td]
[/tr]

It should work now.  

[GazetaBitcoin]

Much appreciated, as usually!  

Pleasure is all mine

Most likely, we need more _ _ _ (but no stealing from o_e_l_e_o's name  ).

Why not? He has thousands!

Our _ _ _ are limiting column size here and I have removed 2 _ from Recunoaște adresele SegWit (P2SH)?* and removed 6 _ from Utilitate (scor subiectiv  ) + added 4_ in general, so we could add 12 _ to your column in question, and it should work like this (just replace in your translated topic our _ _ _ table row)

Fiuuu! 1miau, you are a genie in a bottle and guru of "_"s! Thank you very much, my friend! I just replaced the old code with the one you suggested and now it looks perfect:



But what I still don't understand is... why, at beginning, just after I made the translation by copy-pasting your own BBCode, my table was looking well... And only after a while, after some updates, after adding and removing some websites that column started to look inappropriate. Still, I did not make any change to the table BBCode... Maybe you made a change at the table's code, perhaps, and I did not notice it...? I think this happened, maybe, after you added the part containing Bech32m... If it's not that I have no clue why the table changed in time and why it was looking well at beginning.

Anyway, thanks a lot!

[SFR10]

Small update:

• SoChain is broken at the moment ^{[the same thing goes for their other explorers]}.
  
  

  • We're sorry, but something went wrong.

  
  
• The following explorers are showing Taproot addresses without any stats ^{[not sure if you should change their "YES" in the Bech32m column...]}:
  
  
  • bitquery
  • TokenView
  • Coinmarketcap
  
  
• BitInfoCharts didn't show anything when I searched for a Taproot address.
  
  
• Atomic appears to be mirroring the Trezor explorer at the moment ^{[the same thing also applies to some of their other explorers]}.

[Rizzrack]

Small update:

The following explorers are showing Taproot addresses without any stats ^{[not sure if you should change their "YES" in the Bech32m column...]}:

      bitquery

bitquery shows info for taproot addresses: https://explorer.bitquery.io/bitcoin/address/bc1pdqrcrxa8vx6gy75mfdfj84puhxffh4fq46h3gkp6jxdd0vjcsdyspfxcv6?from=2022-05-01&till=2022-11-10

The problem is that by default it displays info about the inputs and outputs in the last 7 days.
You would need to manually adjust the date range so it displays older info. It's in the top right of the page.



I like the fact that you can search between dates but find it very annoying that the default is 1 week

[1miau]

Small update:

• SoChain is broken at the moment ^{[the same thing goes for their other explorers]}.

• We're sorry, but something went wrong.

I've added a comment pointing out the issue.  

• The following explorers are showing Taproot addresses without any stats ^{[not sure if you should change their "YES" in the Bech32m column...]}:
  
  
  • bitquery
  • TokenView
  • Coinmarketcap

Good question...
I'll skip them for now and only add them if it's done properly to avoid confusing people. Some might use a certain explorer and get disappointed.  

• BitInfoCharts didn't show anything when I searched for a Taproot address.
  

Indeed, not sure why I've added a "Yes" and I can't remember that I've checked this one...  
I've change it to "No".

• Atomic appears to be mirroring the Trezor explorer at the moment ^{[the same thing also applies to some of their other explorers]}.

I've also added a comment.


Many thanks for your research!  

[GazetaBitcoin]

Thanks again, SFR10, for all the involvement you have for this topic. And thank you too, 1miau, for operating the changes.

This is just a short heads-up, to let you know that all new modifications of OP are now reflected within the translated topic as well. Once again, sorry for managing these changes with a delay of a few days, but I really could not attend them faster. I'll try to improve my reaction time in the future

Cheers!

[cygan]

i found a great and very useful website today, which is not directly related to a block explorer but you can still get access to various block information of the complete blockchain
e.g. when and in which epoch exactly the respective block has been mined ... the whole tool is called 'timechain calender'
for me personally a nice tool to 'play' something in the already long block past



edit: version 0.3 offers a live visualization of the last 24 hours of block production. each block is positioned on the ring based on the exact timestamp at which it was mined.

[tranthidung]

e.g. when and in which epoch exactly the respective block has been mined ... the whole tool is called 'timechain calender'
for me personally a nice tool to 'play' something in the already long block past

Nice UI that is mobile friendly too, I like it.

I more like one information - Next Diff Adj (Next Difficulty Adjustment). It is useful to get an estimation for next adjustment on network difficulty especially if it is congested and miners shutdown their ASICs massively by whatever reasons (serious temporary loses or floods, catastrophes, bans on mining etc.)

I know other Bitcoin block explorers have that information too but for the one you shared, it is what I like most.

[1miau]

i found a great and very useful website today, which is not directly related to a block explorer but you can still get access to various block information of the complete blockchain

Interesting one, thanks for sharing here!
I've added it to our category "different / other sites" as it's indeed very useful and fits in well in that list:

Site	Description	Suggested by
______________________________________________________________________________	________________________________________________	____________
Timechain Calendar	displaying different Blockchain-related metrics	cygan

[GazetaBitcoin]

Thank you also for this interesting site, cygan! I can say that it's one of a kind, so far... I never saw any other one similar to this one. I think I'll play with it for a while too.

@1miau: I also updated Romanian topic with the new site.

Excepting that, NeuroticFish observed that SoChain is working again now. I verified it too and it works on my side. Perhaps you can remove the comment from OP which says that SoChain is currently not available...? I hope this helps.

[SFR10]

Found another one ^[Bitfeed] while I was scrolling through the "Twitter feed" of Timechain Calendar's ^{[previously mentioned by "cygan"]} developer... Despite lacking the option to search for a specific address ^{[you can only search for TX ID and block height]}, it comes with a breakdown tree feature and that's useful in following the trail ^{[you need to click on each of the boxes to see it (by hovering over each of the boxes, it'd reveal various types of information)]}.
^{- I'm going to rate it as a solid 3, but I'm not sure if it belongs to the first table, so I'll let you [@1miau] decide instead}

[1miau]

Found another one ^[Bitfeed] while I was scrolling through the "Twitter feed" of Timechain Calendar's ^{[previously mentioned by "cygan"]} developer...

It's an interesting site but when checking, it seems to be very buggy:

Despite lacking the option to search for a specific address ^{[you can only search for TX ID and block height]}, it comes with a breakdown tree feature and that's useful in following the trail ^{[you need to click on each of the boxes to see it (by hovering over each of the boxes, it'd reveal various types of information)]}.

I've tried to look up a valid transaction (see Blockchair: https://blockchair.com/bitcoin/transaction/db6d2b441a5964cd4c3ccdb7316738b020def1fdf2726201f07cc74016844e50)
But it's not working on bitfeed...

Edit: it's working now, I don't know why it didn't work before (I've tried it multiple times already from different transactions...) 




It's an interesting site but I'm not sure if it's really a "Block explorer" as we know it. We can't check addresses and it's looking more like a visualization tool. Since checking addresses and switching from adresses to connected transactions is essential for explorers in my opinion, I would add it to "Different / other sites".
But final decision is up to you since you have detected bitfeed and suggested it here. 

[SFR10]

It's an interesting site but when checking, it seems to be very buggy:
~Snipped~
Edit: it's working now, I don't know why it didn't work before (I've tried it multiple times already from different transactions...) 

I haven't encountered any issues so far, so perhaps the developers were making some changes ^{[at the time]} in the back-end, and that led to a short-term crash on your end

It's an interesting site but I'm not sure if it's really a "Block explorer" as we know it. We can't check addresses and it's looking more like a visualization tool. Since checking addresses and switching from adresses to connected transactions is essential for explorers in my opinion, I would add it to "Different / other sites".
But final decision is up to you since you have detected bitfeed and suggested it here. 

I completely agree with you <sup>[it belongs to the third list]
- If it had the ability to look up addresses, it would've been somewhat similar to chainFlyer explorer and I might've given a bit higher rating than that one.</sup>

[cygan]

with the tool 'timechain calendar' which i mentioned here, you can now even look into the future and with the input of any date you can see the future block.
this feature also works the other way around

[1miau]

It's an interesting site but when checking, it seems to be very buggy:
~Snipped~
Edit: it's working now, I don't know why it didn't work before (I've tried it multiple times already from different transactions...) 

I haven't encountered any issues so far, so perhaps the developers were making some changes ^{[at the time]} in the back-end, and that led to a short-term crash on your end

Checked it today again and it worked well...maybe it's my VPN being very slow sometimes...

I completely agree with you ^{[it belongs to the third list]}

Done. 

^{- If it had the ability to look up addresses, it would've been somewhat similar to chainFlyer explorer and I might've given a bit higher rating than that one.}

Maybe such a feature will get added somewhen later. 
If so, we could add it to our main list.

with the tool 'timechain calendar' which i mentioned here, you can now even look into the future and with the input of any date you can see the future block.
this feature also works the other way around

I've added an additional text pointing it out. 

you can see the future block.*

*expected / projected future block. 

[GazetaBitcoin]

I completely agree with you ^{[it belongs to the third list]}

Done.  

Hey there! Thank you, SFR10, for this new update and for your continuous work in providing new block explorers!
As usual, I also updated the translated topic with this new website. It's curious though that it doesn't offer the possibility to search for addresses... It is what it is.

I've added an additional text pointing it out.  

I also added your updated comment in the translated topic.


Last, but not least, I also removed the comment which was saying that SoChain is not functional. I only recently observed that 1miau made that change.


Oh and one last thing: 1miau, I noticed that you wrote the comments for last two sites with words starting with lower caps letters. Perhaps, for consistency purposes, you would like to use upper case letters for "displaying" and "search"? (And, maybe, change "displaying" with "displays" and "search" with "searches"?)

I hope this helps.

[LoyceV]

Can you add this one?

D@rkBASIC created this: loycevu3e75xlfrdxqueln6mk2dl2ditaqohpxgc35k2jezww6sxs4qd.onion! It's a mempool.space clone on the Tor network.

Can you remove this one? It's gone