oh_pi
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 18, 2016, 02:43:37 AM |
|
I could swear that I got genoil working on 16.04 by using the PPA for cmake from this post http://thecryptoworld.org/how-to-compile-ethminer-on-ubuntu-14-04I know some info is old but I know I have genoil working but I didn't document how... Figures, I will try again and see what I find/did
|
|
|
|
induktor
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 18, 2016, 02:59:30 AM |
|
Thanks!, will reflash the original Kopiemtu 3.0 image and try again with these instructions, right now it compiles, but it is not linking properly, gives me a ton of undefined crap regarding with json libraries. will try that tomorrow and post here results, thanks for the data. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
BTC addr: 1vTGnFgaM2WJjswwmbj6N2AQBWcHfimSc
|
|
|
induktor
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 18, 2016, 12:45:58 PM |
|
UPDATE: I chated with Genoil and he has no idea about the linkling errors, so we are in the dark here, i am doing my best but, i am a hardware guy ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) my coding skills are limited hehe.
|
BTC addr: 1vTGnFgaM2WJjswwmbj6N2AQBWcHfimSc
|
|
|
jk_14 (OP)
Legendary
Offline
Activity: 1292
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 19, 2016, 11:19:19 AM Last edit: October 19, 2016, 12:38:23 PM by jk_14 |
|
UPDATE: I chated with Genoil and he has no idea about the linkling errors, so we are in the dark here, i am doing my best but, i am a hardware guy ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) my coding skills are limited hehe. and I'm a bit busy right now... one hint regarding monitor page - how to quickly discover that something goes wrong with GPU. e.g.: low range temperature is zero and system load is high system restart seems to be the unfailing solution (even syslog message propose that) - so I'm thinking about automatic detection & restart in such case
|
|
|
|
oh_pi
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 19, 2016, 01:39:47 PM |
|
Thanks!, will reflash the original Kopiemtu 3.0 image and try again with these instructions, right now it compiles, but it is not linking properly, gives me a ton of undefined crap regarding with json libraries. will try that tomorrow and post here results, thanks for the data. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) WAIT, I think I used only the PPAs, don't do all of it, I should have specified what I tried. I know I added the PPA for cmake, unsure about the other steps. I also added the PPAs for ethereum/ethereum, /ethereum-dev, /ethereum-qt, and/or /cpp-ethereum, YMMV, I have it working on Linux Mint (I like the easy installs of codecs, call me lazy), something or other. I will check to see what PPAs I have added and see if I can replicate it, primarily I want to do this on an install using Ubuntu Server (alternative iso ("mini.iso)) I prefer to install using the netywork installer, Everything is as current that way though installer is slow. Yadda yadda, I will look to see what I can find for steps via replicating what I can UPDATE: I chated with Genoil and he has no idea about the linkling errors, so we are in the dark here, i am doing my best but, i am a hardware guy ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) my coding skills are limited hehe. and I'm a bit busy right now... one hint regarding monitor page - how to quickly discover that something goes wrong with GPU. e.g.: low range temperature is zero and system load is high system restart seems to be the unfailing solution (even syslog message propose that) - so I'm thinking about automatic detection & restart in such case The major fear here is infinite rolling reboots. But I am also just a hardware guy, more of a hobbyist so I am learning best I can. Not new to Ubuntu, just busy as are we all and I get where I can.
|
|
|
|
jk_14 (OP)
Legendary
Offline
Activity: 1292
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 19, 2016, 03:01:11 PM |
|
The major fear here is infinite rolling reboots. But I am also just a hardware guy, more of a hobbyist so I am learning best I can.
Not new to Ubuntu, just busy as are we all and I get where I can.
Of course I would test it some weeks before ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) and it's not a problem to have it as an option (only ready to activate) could you check your .bash_history for that etminer compilation details ?
|
|
|
|
jekecoin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 19, 2016, 10:08:17 PM |
|
this distro will work on a 1050 ti?
|
|
|
|
jk_14 (OP)
Legendary
Offline
Activity: 1292
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 20, 2016, 07:08:30 AM |
|
this distro will work on a 1050 ti?
there is no driver described on Nvidia site as supporting 1050ti yet, eventually - I will simply release version 3.0a, if current driver won't work with 1050
|
|
|
|
jk_14 (OP)
Legendary
Offline
Activity: 1292
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 21, 2016, 08:56:46 AM Last edit: October 21, 2016, 10:28:57 AM by jk_14 |
|
I made some research for best 16GB pendrive (at least for master rig, instead of SSD) The irrevocable winner is: "The SanDisk Extreme achieved a 4K random write speed of 2.1 MB/s which was over three times faster than the best of the rest"http://usb.userbenchmark.com/SanDisk-Extreme-USB-30-16GB/Rating/1301(available for me at ~12$ in discount offer)
|
|
|
|
oh_pi
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 21, 2016, 01:20:10 PM |
|
I will check by bashrc this weekend on that HDD, been busy (I know you all understand). I am hoping I didn't compile it with double miner instead of dbundle cudaminer. Will check
|
|
|
|
jk_14 (OP)
Legendary
Offline
Activity: 1292
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 21, 2016, 10:31:51 PM |
|
I will check by bashrc this weekend on that HDD, been busy (I know you all understand). I am hoping I didn't compile it with double miner instead of dbundle cudaminer. Will check
I remember 27MH/s on my 1070 at ethminer under old distro. I made some tests with Claymore 7.2 miner. eth hashrate is 26MH/s there, and that is unchanged regardless of powerlimit, even with 85W eth+sia -> 26MH/s + 255MH/s using powerlimit 130W
|
|
|
|
induktor
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 21, 2016, 11:08:00 PM Last edit: October 21, 2016, 11:27:38 PM by induktor |
|
Hi! I got 26 MH in ETH using kopiemtu 2.0 mod #4 @ 90W tdp (the lowest TDP possible on the 1070) haven't had the time to try again to make work kopiemtu 3.0 , will do this weekend. i used PPA but not all of the oh_pi (thanks for the data btw ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ). jk_14 about automatic restart, i dunno if that is a good idea, i have completely disabled monitor on kopiemtu 2.0 mod #4 because does not work, and i don't have a freeze, or miner unload in weeks!, the only weird thing i got is that some of the cards forget the TPL setting and start using more power, reconfiguring TPL again (nvidia-smi -pl xx) solves it on the fly ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) but still weird!, and it is always just one of the cards, and it happens after more than a week of operation, but again, more than a week!. now i remotely reboot the rigs once a week and i have 0 problems. GTX 1070, love at first sight!, best nvidia cards ever!.
|
BTC addr: 1vTGnFgaM2WJjswwmbj6N2AQBWcHfimSc
|
|
|
|
jk_14 (OP)
Legendary
Offline
Activity: 1292
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 23, 2016, 09:03:17 PM Last edit: October 23, 2016, 09:15:16 PM by jk_14 |
|
Hi! I got 26 MH in ETH using kopiemtu 2.0 mod #4 @ 90W tdp (the lowest TDP possible on the 1070) haven't had the time to try again to make work kopiemtu 3.0 , will do this weekend. i used PPA but not all of the oh_pi (thanks for the data btw ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ). jk_14 about automatic restart, i dunno if that is a good idea, i have completely disabled monitor on kopiemtu 2.0 mod #4 because does not work, and i don't have a freeze, or miner unload in weeks!, the only weird thing i got is that some of the cards forget the TPL setting and start using more power, reconfiguring TPL again (nvidia-smi -pl xx) solves it on the fly ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) but still weird!, and it is always just one of the cards, and it happens after more than a week of operation, but again, more than a week!. now i remotely reboot the rigs once a week and i have 0 problems. GTX 1070, love at first sight!, best nvidia cards ever!. I observed the same process of using more power, so under old distro you can also create that two files: root@kopiemtu:~# cat powerlimit.conf 130 root@kopiemtu:~# cat /etc/cron.hourly/powerlimit #!/bin/sh
DPL=`head -1 /root/powerlimit.conf`
/usr/bin/nvidia-smi -pl $DPL >/dev/null 2>&1
root@kopiemtu:~# chmod 755 /etc/cron.hourly/powerlimit root@kopiemtu:~#
and that will adjust the power automatically. I'm not sure if situation with AMD is different now, but I remember how 6x750Ti rig was maintenance-free versus 3x Radeon 7950 rig. 100 days periods without a system restart were common for 750Ti. Fortunately, 1070 is equally good.
|
|
|
|
etang6000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2016, 02:38:37 AM |
|
Hi! I got 26 MH in ETH using kopiemtu 2.0 mod #4 @ 90W tdp (the lowest TDP possible on the 1070) haven't had the time to try again to make work kopiemtu 3.0 , will do this weekend. i used PPA but not all of the oh_pi (thanks for the data btw ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ). jk_14 about automatic restart, i dunno if that is a good idea, i have completely disabled monitor on kopiemtu 2.0 mod #4 because does not work, and i don't have a freeze, or miner unload in weeks!, the only weird thing i got is that some of the cards forget the TPL setting and start using more power, reconfiguring TPL again (nvidia-smi -pl xx) solves it on the fly ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) but still weird!, and it is always just one of the cards, and it happens after more than a week of operation, but again, more than a week!. now i remotely reboot the rigs once a week and i have 0 problems. GTX 1070, love at first sight!, best nvidia cards ever!. I observed the same process of using more power, so under old distro you can also create that two files: root@kopiemtu:~# cat powerlimit.conf 130 root@kopiemtu:~# cat /etc/cron.hourly/powerlimit #!/bin/sh
DPL=`head -1 /root/powerlimit.conf`
/usr/bin/nvidia-smi -pl $DPL >/dev/null 2>&1
root@kopiemtu:~# chmod 755 /etc/cron.hourly/powerlimit root@kopiemtu:~#
and that will adjust the power automatically. I'm not sure if situation with AMD is different now, but I remember how 6x750Ti rig was maintenance-free versus 3x Radeon 7950 rig. 100 days periods without a system restart were common for 750Ti. Fortunately, 1070 is equally good. I don't know what happened, but mine boots straight to terminal and I can't get the GUI to work .
|
|
|
|
jk_14 (OP)
Legendary
Offline
Activity: 1292
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2016, 04:14:12 AM |
|
I don't know what happened, but mine boots straight to terminal and I can't get the GUI to work .
That's OK, GUI is not started by default, while is not necessary for mining, and you may even not notice that, if you have headless rig but if you have monitor connected, just log into text console (root/live) and type: or systemctl enable lightdm.service service lightdm start
the first will start GUI one time, the second sequence will start and activate it permanently root@kopiemtu:~# cat README.txt
One-time graphical interface (as root): service lightdm start
Permanent graphical interface (as root): systemctl enable lightdm.service
------------ Quick setup: ------------
cd /etc/kopiemtu; ls -l nano lbry.conf ... mine switch|start|stop|status monitor start|stop|status
tail -f /var/log/syslog http://your_rig_IP/
================================= Master setup, on SINGLE RIG ONLY! =================================
nano /root/.master.conf mv /root/.master.conf /root/master.conf init 6
ssh-keygen -q -P "" -f /root/.ssh/id_rsa scp /root/.ssh/id_rsa.pub localhost:/root/.ssh/authorized_keys scp /root/.ssh/id_rsa.pub w12:/root/.ssh/authorized_keys scp /root/.ssh/id_rsa.pub w21:/root/.ssh/authorized_keys scp /root/.ssh/id_rsa.pub w22:/root/.ssh/authorized_keys ... <until your last rig>
Verify your configuration:
mm uptime mm "nvidia-smi | grep %" mmnv
mmis mmos
mmit mmip mmih
mmot mmip
mm ssh
================================= KopiemTu 3.0 is distributed under six-beers license. If you want to use it - you must send me six beers. For simplicity - send 0.01 btc to my smartphone: 1JofTuhjgxuQAEtqyCdj7JNwzrZ1f7EXcg (no doubt I will utilise it for six beers :)
Vertcoin: Vh9VgXbQN9DdcUJzt5mrxZYWHKpoNgemmJ MobileCash: MBeBwseXEwVmPg8cvQrEFSCXVnL5q3n3LP
root@kopiemtu:~#
|
|
|
|
jk_14 (OP)
Legendary
Offline
Activity: 1292
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 26, 2016, 11:59:37 AM |
|
That's OK, GUI is not started by default, while is not necessary for mining, and you may even not notice that, if you have headless rig (...) systemctl enable lightdm.service service lightdm start
P.S. of course if you want to play with OC, then GUI should be activated anyway even for headless rig, with teamviewer - for proper nvidia-settings operation. e.g.: http://www.phoronix.com/scan.php?px=MTY1OTM&page=news_item
|
|
|
|
lmaonade80
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 124
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 27, 2016, 02:53:28 AM |
|
Does this work with 750ti or 900 series cards?
|
|
|
|
jk_14 (OP)
Legendary
Offline
Activity: 1292
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 27, 2016, 04:47:27 AM Last edit: October 27, 2016, 05:13:08 AM by jk_14 |
|
Does this work with 750ti or 900 series cards?
yes the process is quite easy: root@kopiemtu:~# root@kopiemtu:~# cd /opt/miners/ root@kopiemtu:/opt/miners# find . | grep ccminer_ ./ccminer-1.8.2-tpruvot/ccminer_all ./ccminer-1.8.2-tpruvot/ccminer_61 ./ccminer-1.8.2-tpruvot/ccminer_52 ./ccminer-vert-1.5.80.1-vert/ccminer_all ./ccminer-vert-1.5.80.1-vert/ccminer_61 ./ccminer-vert-1.5.80.1-vert/ccminer_52 ./ccminer-vert-1.5.80.4-vert/ccminer_all ./ccminer-vert-1.5.80.4-vert/ccminer_61 ./ccminer-vert-1.5.80.4-vert/ccminer_52 root@kopiemtu:/opt/miners# root@kopiemtu:/opt/miners# cd ccminer-1.8.2-tpruvot/ root@kopiemtu:/opt/miners/ccminer-1.8.2-tpruvot# rm ccminer root@kopiemtu:/opt/miners/ccminer-1.8.2-tpruvot# ln -s ccminer_all ccminer root@kopiemtu:/opt/miners/ccminer-1.8.2-tpruvot# ls -l ccminer lrwxrwxrwx 1 root root 11 Oct 27 05:40 ccminer -> ccminer_all root@kopiemtu:/opt/miners/ccminer-1.8.2-tpruvot# cd .. root@kopiemtu:/opt/miners# root@kopiemtu:/opt/miners# cd ccminer-vert-1.5.80.1-vert/ root@kopiemtu:/opt/miners/ccminer-vert-1.5.80.1-vert# rm ccminer root@kopiemtu:/opt/miners/ccminer-vert-1.5.80.1-vert# ln -s ccminer_all ccminer root@kopiemtu:/opt/miners/ccminer-vert-1.5.80.1-vert# ls -l ccminer lrwxrwxrwx 1 root root 11 Oct 27 05:41 ccminer -> ccminer_all root@kopiemtu:/opt/miners/ccminer-vert-1.5.80.1-vert# cd .. root@kopiemtu:/opt/miners# root@kopiemtu:/opt/miners# cd ccminer-vert-1.5.80.4-vert/ root@kopiemtu:/opt/miners/ccminer-vert-1.5.80.4-vert# rm ccminer root@kopiemtu:/opt/miners/ccminer-vert-1.5.80.4-vert# ln -s ccminer_all ccminer root@kopiemtu:/opt/miners/ccminer-vert-1.5.80.4-vert# cd .. root@kopiemtu:/opt/miners#
ccminer_all is general use version, which supports Compute_50 till Compute_62 hint: use Arrow-Up to repeat the same sequence of commands for every directory I have several 750Ti still - working fine under 3.0, i.e. verified EDIT: give us any feedback if it works ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
lmaonade80
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 124
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2016, 01:00:57 AM |
|
Does this work with 750ti or 900 series cards?
yes the process is quite easy: root@kopiemtu:~# root@kopiemtu:~# cd /opt/miners/ root@kopiemtu:/opt/miners# find . | grep ccminer_ ./ccminer-1.8.2-tpruvot/ccminer_all ./ccminer-1.8.2-tpruvot/ccminer_61 ./ccminer-1.8.2-tpruvot/ccminer_52 ./ccminer-vert-1.5.80.1-vert/ccminer_all ./ccminer-vert-1.5.80.1-vert/ccminer_61 ./ccminer-vert-1.5.80.1-vert/ccminer_52 ./ccminer-vert-1.5.80.4-vert/ccminer_all ./ccminer-vert-1.5.80.4-vert/ccminer_61 ./ccminer-vert-1.5.80.4-vert/ccminer_52 root@kopiemtu:/opt/miners# root@kopiemtu:/opt/miners# cd ccminer-1.8.2-tpruvot/ root@kopiemtu:/opt/miners/ccminer-1.8.2-tpruvot# rm ccminer root@kopiemtu:/opt/miners/ccminer-1.8.2-tpruvot# ln -s ccminer_all ccminer root@kopiemtu:/opt/miners/ccminer-1.8.2-tpruvot# ls -l ccminer lrwxrwxrwx 1 root root 11 Oct 27 05:40 ccminer -> ccminer_all root@kopiemtu:/opt/miners/ccminer-1.8.2-tpruvot# cd .. root@kopiemtu:/opt/miners# root@kopiemtu:/opt/miners# cd ccminer-vert-1.5.80.1-vert/ root@kopiemtu:/opt/miners/ccminer-vert-1.5.80.1-vert# rm ccminer root@kopiemtu:/opt/miners/ccminer-vert-1.5.80.1-vert# ln -s ccminer_all ccminer root@kopiemtu:/opt/miners/ccminer-vert-1.5.80.1-vert# ls -l ccminer lrwxrwxrwx 1 root root 11 Oct 27 05:41 ccminer -> ccminer_all root@kopiemtu:/opt/miners/ccminer-vert-1.5.80.1-vert# cd .. root@kopiemtu:/opt/miners# root@kopiemtu:/opt/miners# cd ccminer-vert-1.5.80.4-vert/ root@kopiemtu:/opt/miners/ccminer-vert-1.5.80.4-vert# rm ccminer root@kopiemtu:/opt/miners/ccminer-vert-1.5.80.4-vert# ln -s ccminer_all ccminer root@kopiemtu:/opt/miners/ccminer-vert-1.5.80.4-vert# cd .. root@kopiemtu:/opt/miners#
ccminer_all is general use version, which supports Compute_50 till Compute_62 hint: use Arrow-Up to repeat the same sequence of commands for every directory I have several 750Ti still - working fine under 3.0, i.e. verified EDIT: give us any feedback if it works ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) For some reason I thought at the time this worked with zcash. Is this the case?
|
|
|
|
|