[ANN] HEX•FURY 11+Gh/s USB Stick Miner [ IN STOCK UK, EU ] Shipping Worldwide

[LordTheron]

I am interested in the details of your mod?

Just remove P110 fuse, and bridge the pads with a bit of wire. That's all   Also make sure you don't connect more than 8 Hex miners to RF hub after the mod as there will be no limits what each port can draw from psu and you don't want to overload it and brake it.

Edit:

I've noticed that if you remove fuses, you can adjust the voltage on RF hub and it will overclock your Hex  I found 5.25V works really well and its not frying the hub. With fuses the hub will perform worst if you adjust the voltage but without fuses does the job well 

Over 18hrs, 6 sticks @ 5.25V 78.5Gh avg, not to bad



Ps. All modification are done at your own risk. Please make sure you know what you are doing as I'm not responsible for any damages that might cause if something go wrong.

Have fun 

[1715164246]

1715164246

[1715164246]

1715164246

[dogie]

This company's rating has changed in the Manufacturer Trustworthiness Guide.

[ptr727]

we have special design usb hub for hex fury
check our store: http://razorfishsolutions.com.hk/store/

Trying to purchase, but no payment methods show up during checkout?

[LordTheron]

we have special design usb hub for hex fury
check our store: http://razorfishsolutions.com.hk/store/

Trying to purchase, but no payment methods show up during checkout?

Are you trying to pay by card?

[ptr727]

we have special design usb hub for hex fury
check our store: http://razorfishsolutions.com.hk/store/

Trying to purchase, but no payment methods show up during checkout?

Are you trying to pay by card?

I add items to cart, checkout as guest, enter contact and address details, select shipping, go to payment step, and there is nothing, no options for any type of payment is offered, it just says "No Payment Methods".

Edit: To clarify, this is a shopping cart failure on the razorfishsolutions.com.hk site, not the asicrunner.com site.

[klintay]

we have special design usb hub for hex fury
check our store: http://razorfishsolutions.com.hk/store/

Trying to purchase, but no payment methods show up during checkout?

Are you trying to pay by card?

I add items to cart, checkout as guest, enter contact and address details, select shipping, go to payment step, and there is nothing, no options for any type of payment is offered, it just says "No Payment Methods".

Edit: To clarify, this is a shopping cart failure on the razorfishsolutions.com.hk site, not the asicrunner.com site.

Yep, i get the same problem. If you want the 19 port hub then you can buy it here on bitcointalk thread:

https://bitcointalk.org/index.php?topic=418087.0

or

www.eyeboot.com

It is cheaper and it works

In stock with immediate shipping!

[razorfishsl]

we have special design usb hub for hex fury
check our store: http://razorfishsolutions.com.hk/store/

Trying to purchase, but no payment methods show up during checkout?

The payment was disabled  whilst I ensured that no one was exposed due to the "HeartBLEED" bug.  
Website should be fine to use now.

But if you contact me directly I'm offering  'free gifts'  (That does not mean a 'shitty key chain')

You can contact me here for hubs.
https://bitcointalk.org/index.php?topic=560003.msg6105890#msg6105890


Also for people not 'comfortable' about modding the hubs I can supply an adaptor.

and of course great work/hats off to 'LordTheron'



RF

[LordTheron]

we have special design usb hub for hex fury
check our store: http://razorfishsolutions.com.hk/store/

Trying to purchase, but no payment methods show up during checkout?

Are you trying to pay by card?

I add items to cart, checkout as guest, enter contact and address details, select shipping, go to payment step, and there is nothing, no options for any type of payment is offered, it just says "No Payment Methods".

Edit: To clarify, this is a shopping cart failure on the razorfishsolutions.com.hk site, not the asicrunner.com site.

Yep, i get the same problem. If you want the 19 port hub then you can buy it here on bitcointalk thread:

https://bitcointalk.org/index.php?topic=418087.0

or

www.eyeboot.com

It is cheaper and it works

In stock with immediate shipping!

I would appreciate if  you keep your adverts on your forums. This is Hex*fury thread! Thank you.

[-ck]

I just posted a new version of cgminer, 4.3.3, which has a fix for a huge memory leak which has always been there with the driver for this particular hardware. All users mining with this hardware on cgminer are urged to upgrade.

[Harlbatr]

Nice sticks, anyone achieved 15 gh/s  ? How much Wattage are they using ?

[LordTheron]

Nice sticks, anyone achieved 15 gh/s  ? How much Wattage are they using ?

Hex is using around 10W. So far I've managed to push it to over 16gh and 15.7Gh avg. See below

[philipma1957]

does anyone in the usa have one of these to sell?  I don't mean any disrespect to the threads op.

 I just wanted one to play around with. I thought someone near my state of NJ might want to offload one.

[LordTheron]

New prices for Hex*Fury, Gridseed, and YellowJacket in store. Also free express shipping worldwide with orders over £500.

Please visit www.asicrunner.com

[mbilker]

intron or c-scape, how did you guys make your modified usb hub? I really would like to know. If it is possible, could you point me to some design? I would like to make my own and not buy pre-made.

[razorfishsl]

intron or c-scape, how did you guys make your modified usb hub? I really would like to know. If it is possible, could you point me to some design? I would like to make my own and not buy pre-made.

It is fairly easy, you would require an off the shelf hub that can withstand the current, then you would need to replace the 'Shitty' wall wart/phone charger with a better power supply, and you will require some sort of soldering experience/mains voltage experience/safety etc


When you say 'make your own',  at what level are you thinking:

A. Off the shelf assemblies (ebay hub/power supply)
B. Design your own PCB/ power feed systems, using discrete components and  soldering irons?

RF

[wttbs]

Great review by nwoolls
http://blog.nwoolls.com/2014/05/13/bitcoin-mining-on-mac-os-x-hex%E2%80%A2fury-asics/

[intron]

intron or c-scape, how did you guys make your modified usb hub? I really would like to know. If it is possible, could you point me to some design? I would like to make my own and not buy pre-made.

I cheated a bit:) Took a Trust ten port USB hub (cheapest one
I could find), removed the cover, soldered wires to the positive
terminal of each USB socket connector and soldered a thick wire
to the ground plane. The wires were then connected to a 5V/30A
low-cost power supply unit. With a current clamp I measured the
current.

See picture:



And then with hex•furys:

[Felipeo]

Nice looking hex flower Intron

[intron]

Nice looking hex flower Intron

[LordTheron]

Thats very nice Intron.   Does it get hot with 10 Hex*furys?