LordTheron (OP)
|
|
April 25, 2014, 05:06:58 PM Last edit: April 27, 2014, 04:17:23 PM by LordTheron |
|
I am interested in the details of your mod?
Just remove P110 fuse, and bridge the pads with a bit of wire. That's all Also make sure you don't connect more than 8 Hex miners to RF hub after the mod as there will be no limits what each port can draw from psu and you don't want to overload it and brake it. Edit: I've noticed that if you remove fuses, you can adjust the voltage on RF hub and it will overclock your Hex I found 5.25V works really well and its not frying the hub. With fuses the hub will perform worst if you adjust the voltage but without fuses does the job well Over 18hrs, 6 sticks @ 5.25V 78.5Gh avg, not to bad Ps. All modification are done at your own risk. Please make sure you know what you are doing as I'm not responsible for any damages that might cause if something go wrong. Have fun
|
|
|
|
|
ptr727
Member
Offline
Activity: 65
Merit: 10
|
|
April 30, 2014, 02:34:30 PM |
|
Trying to purchase, but no payment methods show up during checkout?
|
|
|
|
LordTheron (OP)
|
|
April 30, 2014, 06:57:14 PM |
|
Trying to purchase, but no payment methods show up during checkout? Are you trying to pay by card?
|
|
|
|
ptr727
Member
Offline
Activity: 65
Merit: 10
|
|
April 30, 2014, 07:07:51 PM Last edit: April 30, 2014, 08:46:15 PM by ptr727 |
|
Trying to purchase, but no payment methods show up during checkout? Are you trying to pay by card? I add items to cart, checkout as guest, enter contact and address details, select shipping, go to payment step, and there is nothing, no options for any type of payment is offered, it just says "No Payment Methods". Edit: To clarify, this is a shopping cart failure on the razorfishsolutions.com.hk site, not the asicrunner.com site.
|
|
|
|
klintay
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
May 01, 2014, 04:22:59 AM |
|
Trying to purchase, but no payment methods show up during checkout? Are you trying to pay by card? I add items to cart, checkout as guest, enter contact and address details, select shipping, go to payment step, and there is nothing, no options for any type of payment is offered, it just says "No Payment Methods". Edit: To clarify, this is a shopping cart failure on the razorfishsolutions.com.hk site, not the asicrunner.com site. Yep, i get the same problem. If you want the 19 port hub then you can buy it here on bitcointalk thread: https://bitcointalk.org/index.php?topic=418087.0or www.eyeboot.comIt is cheaper and it works In stock with immediate shipping!
|
|
|
|
razorfishsl
|
|
May 01, 2014, 04:49:31 AM Last edit: May 01, 2014, 08:10:39 AM by razorfishsl |
|
Trying to purchase, but no payment methods show up during checkout? The payment was disabled whilst I ensured that no one was exposed due to the "HeartBLEED" bug. Website should be fine to use now. But if you contact me directly I'm offering 'free gifts' (That does not mean a 'shitty key chain') You can contact me here for hubs. https://bitcointalk.org/index.php?topic=560003.msg6105890#msg6105890Also for people not 'comfortable' about modding the hubs I can supply an adaptor. and of course great work/hats off to 'LordTheron' RF
|
|
|
|
LordTheron (OP)
|
|
May 01, 2014, 09:37:07 AM |
|
Trying to purchase, but no payment methods show up during checkout? Are you trying to pay by card? I add items to cart, checkout as guest, enter contact and address details, select shipping, go to payment step, and there is nothing, no options for any type of payment is offered, it just says "No Payment Methods". Edit: To clarify, this is a shopping cart failure on the razorfishsolutions.com.hk site, not the asicrunner.com site. Yep, i get the same problem. If you want the 19 port hub then you can buy it here on bitcointalk thread: https://bitcointalk.org/index.php?topic=418087.0or www.eyeboot.comIt is cheaper and it works In stock with immediate shipping! I would appreciate if you keep your adverts on your forums. This is Hex*fury thread! Thank you.
|
|
|
|
-ck
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
|
May 04, 2014, 07:30:19 AM |
|
I just posted a new version of cgminer, 4.3.3, which has a fix for a huge memory leak which has always been there with the driver for this particular hardware. All users mining with this hardware on cgminer are urged to upgrade.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
Harlbatr
Newbie
Offline
Activity: 34
Merit: 0
|
|
May 05, 2014, 01:23:26 PM |
|
Nice sticks, anyone achieved 15 gh/s ? How much Wattage are they using ?
|
|
|
|
LordTheron (OP)
|
|
May 06, 2014, 08:42:33 PM |
|
Nice sticks, anyone achieved 15 gh/s ? How much Wattage are they using ?
Hex is using around 10W. So far I've managed to push it to over 16gh and 15.7Gh avg. See below
|
|
|
|
philipma1957
Legendary
Online
Activity: 4228
Merit: 8453
'The right to privacy matters'
|
|
May 06, 2014, 11:01:31 PM |
|
does anyone in the usa have one of these to sell? I don't mean any disrespect to the threads op.
I just wanted one to play around with. I thought someone near my state of NJ might want to offload one.
|
|
|
|
LordTheron (OP)
|
|
May 12, 2014, 06:59:43 PM |
|
New prices for Hex*Fury, Gridseed, and YellowJacket in store. Also free express shipping worldwide with orders over £500. Please visit www.asicrunner.com
|
|
|
|
mbilker
Newbie
Offline
Activity: 4
Merit: 0
|
|
May 13, 2014, 09:33:09 PM |
|
intron or c-scape, how did you guys make your modified usb hub? I really would like to know. If it is possible, could you point me to some design? I would like to make my own and not buy pre-made.
|
|
|
|
razorfishsl
|
|
May 14, 2014, 04:09:51 AM |
|
intron or c-scape, how did you guys make your modified usb hub? I really would like to know. If it is possible, could you point me to some design? I would like to make my own and not buy pre-made.
It is fairly easy, you would require an off the shelf hub that can withstand the current, then you would need to replace the 'Shitty' wall wart/phone charger with a better power supply, and you will require some sort of soldering experience/mains voltage experience/safety etc When you say 'make your own', at what level are you thinking: A. Off the shelf assemblies (ebay hub/power supply) B. Design your own PCB/ power feed systems, using discrete components and soldering irons? RF
|
|
|
|
wttbs
Legendary
Offline
Activity: 2210
Merit: 1109
|
|
May 14, 2014, 05:53:48 AM |
|
|
|
|
|
intron
Sr. Member
Offline
Activity: 427
Merit: 251
- electronics design|embedded software|verilog -
|
|
May 14, 2014, 08:13:04 AM |
|
intron or c-scape, how did you guys make your modified usb hub? I really would like to know. If it is possible, could you point me to some design? I would like to make my own and not buy pre-made.
I cheated a bit:) Took a Trust ten port USB hub (cheapest one I could find), removed the cover, soldered wires to the positive terminal of each USB socket connector and soldered a thick wire to the ground plane. The wires were then connected to a 5V/30A low-cost power supply unit. With a current clamp I measured the current. See picture: And then with hex•furys:
|
|
|
|
Felipeo
Sr. Member
Offline
Activity: 476
Merit: 262
EOSABC
|
|
May 14, 2014, 11:43:59 AM |
|
Nice looking hex flower Intron
|
|
|
|
|
LordTheron (OP)
|
|
May 15, 2014, 12:17:26 AM |
|
Thats very nice Intron. Does it get hot with 10 Hex*furys?
|
|
|
|
|