⛏Team Black Miner (ETHB3 ETHW ETC VTC KAWPOW FIROPOW ZIL +dual +tripple mining )

[sp_]

No this is mining software. False hits on the antivirus.

https://www.virustotal.com/gui/file/a335c5d6534f1f376c7f2f3e3c9af0717654386115fb65a2fb0e913d82236de3

TeamBlackMiner_1_05_cuda_11_2.7z

[1714765893]

1714765893

[1714765893]

1714765893

[Dr_Victor]

Honestly speaking I have low hash rate on TBM vs T-rex. GTX 1070 - 23 vs 26, GTX 1070 Ti 32 vs 34.

[kiss34000]

TBMiner 1.04

Use v1.05.

The staleshares displayed in the miner window is an estimate. it's not given from the pool. Other users have reported ~135MHASH on the RTX 3090 but perhaps not on the FE cards. You need to increase memory to above 11160

33m [2021-09-16 11:35:43.184] eth.2miners.com (ethash)    PING: 119ms    DIFFICULTY: 2.03     EPOCH: 441
33m [2021-09-16 11:35:43.184]
33m [2021-09-16 11:35:43.184]
33m [2021-09-16 11:35:43.184] ID    BOARD   TEMP    FAN     CORE    MEM     WATT    kW/h    COST/h
33m [2021-09-16 11:35:43.184] GPU0  3090    49/0    95      1524    11160   335     0.34    inf
33m [2021-09-16 11:35:43.184]                                               335     0.34    inf
33m [2021-09-16 11:35:43.184]
33m [2021-09-16 11:35:43.184] ID    BOARD   TYPE    HASHRATE/W      HASHRATE        AVERAGE         SHARES
33m [2021-09-16 11:35:43.184] GPU0  3090    Cuda    398.62 kH/W     133.54 MH/s     133.52 MH/s     36/0/3 (100.00)
33m [2021-09-16 11:35:43.184]                       398.62 kH/s     133.54 MH/s     133.52 MH/s     36/0/3 (100.00)

Hi , how do you put more than 11000 because afterburner allow me only 11000 and no more is it possible to use special parameter like --lock_cclock and --mclock ?? i test it on windows and on 80FE and 90FE on the same pc

[sp_]

Honestly speaking I have low hash rate on TBM vs T-rex. GTX 1070 - 23 vs 26, GTX 1070 Ti 32 vs 34.

On the 1070 you can get 27-28MHAsH with core 1950-2000 mem 4400 epoch 443. T-rex is faster on the GTX 1070 Ti with memtweak, but you can run an older t-rex miner in the backround  with memtweak and reach 34-35MHASH with tbm.

t-rex has 1% fee, teamblack 0.5%...

[sp_]

Hi , how do you put more than 11000 because afterburner allow me only 11000 and no more is it possible to use special parameter like --lock_cclock and --mclock ?? i test it on windows and on 80FE and 90FE on the same pc

Miners will always find a way to maximize their profit. We make the software, you do the tuning. I'ts not a FE card running...

[PeaMine]

What pools could you recommend for stale share support?

[kissmarx]

Can TBM also do ERGO + Zilliqa?
I would love to see TBM do that, and see TBM in HiveOS, RaveOS, and MinerStat as well.

[sp_]

What pools could you recommend for stale share support?

Try nanopool.org  We are adding support for more pools in v1.06

[birdjan]

Support for huobipool?

[sp_]

Support for huobipool?

yes

[Nighthog]

I get this error shortly after starting the Miner.

Code:

X:\TeamBlackMiner_1_05_cuda_11_4>TBMiner --algo etchash --hostname etchash.eu.mine.zergpool.com --port 9997 --wallet X --server_passwd c=ETC
     0m [2021-09-19 12:21:39.480] OpenCL driver version: 362.758
     0m [2021-09-19 12:21:39.480] Cuda driver version: 0.0
     0m [2021-09-19 12:21:39.480] Cuda runtime API version: 11.4
     0m [2021-09-19 12:21:39.480]
     0m [2021-09-19 12:21:39.480]
     0m [2021-09-19 12:21:39.480]
     0m [2021-09-19 12:21:39.480] Welcome to Team Black Miner 1.05
     0m [2021-09-19 12:21:39.480]
     0m [2021-09-19 12:21:39.480]
     0m [2021-09-19 12:21:39.480] GPU0 gfx90c 15GB added to miner as OpenCL device
     0m [2021-09-19 12:21:39.480] GPU1 gfx900 8GB added to miner as OpenCL device
     0m [2021-09-19 12:21:39.480] GPU2 gfx1030 17GB added to miner as OpenCL device
     0m [2021-09-19 12:21:39.511] GPU0 Started CL work thread
     0m [2021-09-19 12:21:39.533] GPU1 Started CL work thread
     0m [2021-09-19 12:21:39.549] GPU2 Started CL work thread
     0m [2021-09-19 12:21:39.595] Trying etchash.eu.mine.zergpool.com:9997 (etchash)
     0m [2021-09-19 12:21:39.697] Extranonce is set to 14777717752286150656
     0m [2021-09-19 12:21:39.697] Pool responded successfully to subscribe
     0m [2021-09-19 12:21:39.812] Extranonce is set to 1366561011930234880
     0m [2021-09-19 12:21:39.812] Pool responded successfully to extranonce subscribe
     0m [2021-09-19 12:21:39.834] Extranonce is set to 14777717752286150656
     0m [2021-09-19 12:21:39.850] Pool responded successfully to authorize
     0m [2021-09-19 12:21:39.865] Difficulty is set to 1.164135
     0m [2021-09-19 12:21:39.896] GPU2 Starting generating etchash dag (Epoch: 226)
     0m [2021-09-19 12:21:39.896] GPU0 Starting generating etchash dag (Epoch: 226)
     0m [2021-09-19 12:21:39.896] GPU1 Starting generating etchash dag (Epoch: 226)
     0m [2021-09-19 12:21:43.567] GPU2 DAG generated in 3.68 seconds (2899966kb)
     0m [2021-09-19 12:21:43.567] GPU2 XIntensity set to Dynamic
     0m [2021-09-19 12:21:43.583] GPU2 Dag buffer verified ok!
     0m [2021-09-19 12:21:45.904] GPU1 DAG generated in 6.02 seconds (2899966kb)
     0m [2021-09-19 12:21:45.904] GPU1 XIntensity set to Dynamic
     0m [2021-09-19 12:21:45.920] GPU1 Dag buffer verified ok!
     0m [2021-09-19 12:22:01.043] GPU0 DAG generated in 21.16 seconds (2899966kb)
     0m [2021-09-19 12:22:01.043] Job 8539c688
     0m [2021-09-19 12:22:01.043] GPU0 XIntensity set to Dynamic
     0m [2021-09-19 12:22:01.228] GPU0 Dag buffer verified ok!
     0m [2021-09-19 12:22:01.644] Job 1f7c854f
     0m [2021-09-19 12:22:04.583] Job fb822a57
     0m [2021-09-19 12:22:05.955] Job 6af0a40a
     0m [2021-09-19 12:22:08.292] Job e2c638fb
     0m [2021-09-19 12:22:10.219] Job a5abbbce
     0m [2021-09-19 12:22:16.266] Job b8b6dd4f
     0m [2021-09-19 12:22:19.374] Job 2fbdc1be
     0m [2021-09-19 12:22:22.313] Job a12a4204
     0m [2021-09-19 12:22:25.907] Job 38f61c8e
     0m [2021-09-19 12:22:29.030] Job 723413c5
     0m [2021-09-19 12:22:34.059] GPU1 Solution found in 5.07s (Submit every 54.65 seconds)
     0m [2021-09-19 12:22:34.175] Accepted (1/1/0) Reply: 104ms
     0m [2021-09-19 12:22:34.961] Difficulty is set to 0.582068
     0m [2021-09-19 12:22:34.977] Job 11954eef
'nvidia-smi.exe' is not recognized as an internal or external command,
operable program or batch file.
0x00007FF63A3DE415 (0x00007FF63A413120 0x0000000000000032 0x0000000061470F33 0x0000000000000000)
0x00007FF63A3DBBA9 (0x000001BBCA5DFEA0 0x0000000000000000 0x0000000000000000 0x0000000000000000)
0x00007FFAAC431BB2 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), _configthreadlocale() + 0x92 bytes(s)
0x00007FFAADAB7034 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), BaseThreadInitThunk() + 0x14 bytes(s)
0x00007FFAAED42651 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), RtlUserThreadStart() + 0x21 bytes(s)

X:\TeamBlackMiner_1_05_cuda_11_4>pause
Press any key to continue . . .

Suggestions?

AMD cards only.

[sp_]

This is a bug we have fixed in v1.06

Run with --no-stats.  Zergpool probobly need --xintensity 32 as well. (because of rejects on the  default -1 dynamic xintensity)

You can also use the --amd-only switch

[birdjan]

Thanks for upcommong huobipool support.I triied your miner on mph. gtx 1070 gminer 25.9mh,tbm 27.22 mh with same oc.gtx 1070ti gminer 31.8mh,tbm 33.2 mh agai with same oc.Great job.Can You find any solution for tlb problems for gtx series?There are so many that cards.

[Nighthog]

This is a bug we have fixed in v1.06

Run with --no-stats.  Zergpool probobly need --xintensity 32 as well. (because of rejects on the  default -1 dynamic xintensity)

You can also use the --amd-only switch

None of the options allowed the Miner to continue, still the crash dump happens.

It might be the gfx90c that is crashing, will have to test various options to see if it allows it to run longer.

No other miner support the 5700G iGPU yet successfully.

EDIT: Another error:

Code:

X:\TeamBlackMiner_1_05_cuda_11_4>TBMiner.exe --list-devices

Available Cuda devices
-----------------------

     0m [2021-09-19 13:21:49.574] C:\gc\TBMiner\source\sp_workers\cuda_gpu.cpp:cuda_get_num_devices():61: A cuda runtime error occured: CUDA driver version is insufficient for CUDA runtime version
     0m [2021-09-19 13:21:49.574] Shutting down threads
     0m [2021-09-19 13:21:53.584] Exiting

[sp_]

No other miner support the 5700G iGPU yet successfully.

you can try --xintensity 1

EDIT: Another error:

Thanks. fixed in v1.06

Thanks for upcommong huobipool support.I triied your miner on mph. gtx 1070 gminer 25.9mh,tbm 27.22 mh with same oc.gtx 1070ti gminer 31.8mh,tbm 33.2 mh agai with same oc.Great job.Can You find any solution for tlb problems for gtx series?There are so many that cards.

Thanks.

I believe the tlb cache is a hardware limit.
Increase coreclock and power is the only "fix" for now.

The Team black miner likes more power. Retune your rigs to find the optimal settings. Optimal clocks on the other miners, might not be the optimal for this miner. Perhaps you can gain a few profitable MHASH'es.

[moderator's note: consecutive posts merged]

[somaton]

looks like readme.txt is not up to date: -E --xintensity (default=32, -1=calculate dynamic. Valid values 1-xxxxx)
is it 64 now?

[sp_]

is it 64 now?

yes. The readme corrected in v1.06

[Nighthog]

No other miner support the 5700G iGPU yet successfully.

you can try --xintensity 1

Didn't help.

I tried lower clocks, lower memory & different voltage etc.
Keeps crashing with the same error as I posted earlier.

It's the gfx90c, you see the wattage & frequency drop just a moment before the error comes in the Miner while the other discrete GPU's keep chugging a moment longer before the exit.

Is there a option to specify which devices to use?
I tried [cl-devices 1,2] as an option but it kept using all gpu's anyway. (trying to exclude the gfx90c)

[sp_]

--cl-devices [1,2]

[Nighthog]

--cl-devices [1,2]

Doesn't work.

EDIT:
V1.04 doesn't crash when "miner stats" are loaded with the gfx90c and keeps running.

Though:
eth_submitHashrate: Pool responded with error
Error: method not found.

Keeps being told quite often.

The important part is it doesn't crash with v1.04 as it does with v1.05.

Might be the following causing issues added for v1.05?
6. Stats for AMD including temp control