Team Black Miner ⛏ (KAWPOW FIROPOW EVRPROGPOW MEOWPOW VERTHASH ETC/ETH/ETHB3)

[sp_]

I try to setup TBM on HiveOs with different GPU.
I try all --cl-devices [ i ]  with i=0 to 15 and all the time the miner fail and restart.

You can try the short option instead -Y [ 0 ]

[snoby67]

I try to setup TBM on HiveOs with different GPU.
I try all --cl-devices [ i ]  with i=0 to 15 and all the time the miner fail and restart.

You can try the short option instead -Y [ 0 ]

I try, but seems the same problem 

[sp_]

I try, but seems the same problem 

try cl-devices before cuda-devices

--cl-devices [1]  --cuda-devices [2] 

[snoby67]

I try, but seems the same problem  

try cl-devices before cuda-devices

--cl-devices [1]  --cuda-devices [2]  

I will give you all my config rig.

With -D I have :
https://ibb.co/F5RncyJ

If I only try --cl-devices [5] I have : No device are set
It is the same for --cl-devices [6] and [7].
https://ibb.co/ZSdKLgr

Maybe it is the begining of my problem.

[varadero]

under hiveos and with tbm 1.21 I have this error
Has someone already had this problem ?

https://i.goopics.net/800/pygcb3.jpg

[sp_]

You need to upgrade the cuda driver to a driver that can run cuda 11.4 code. The latest is fine

https://github.com/sp-hash/TeamBlackMiner/issues/78

[dedizonesv2]

under hiveos and with tbm 1.21 I have this error
Has someone already had this problem ?

use in "Run Command" on hiveos this:

Code:

nvidia-driver-update 470.82.00

juste wait 5 minute... and run this again in "Run command"

Code:

sudo apt-get install nvidia-settings xserver-xorg-core --allow-change-held-packages -y

After 2 minutes => REBOOT RIG

[ep690d01]

00:00:20 [2021-10-29 13:48:53.022] eu1.ethermine.org (ethash)    PING: 33ms    DIFFICULTY: 1.00     EPOCH: 450
00:00:20 [2021-10-29 13:48:53.022]
00:00:20 [2021-10-29 13:48:53.022]
00:00:20 [2021-10-29 13:48:53.022] ID   BOARD   TYPE    KERN    XINT    TEMP    FAN     CORE    MEM     WATT
00:00:20 [2021-10-29 13:48:53.022] GPU0 5500XT  OpenCL  0       24      0/0     0       0       0       0
00:00:20 [2021-10-29 13:48:53.022]                                                                      0
00:00:20 [2021-10-29 13:48:53.022]
00:00:20 [2021-10-29 13:48:53.022] ID   BOARD   HASHRATE/W      HASHRATE        AVERAGE         SHARES
00:00:20 [2021-10-29 13:48:53.022] GPU0 5500XT  0.00 H/W        25.90 MH/s      25.90 MH/s      476/0/13 (100.00)
00:00:20 [2021-10-29 13:48:53.022]              0.00 H/W        25.90 MH/s      25.90 MH/s      476/0/13 (100.00)
00:00:20 [2021-10-29 13:48:53.022]
00:00:20 [2021-10-29 13:48:53.022] SHARES PER MINUTE: 0.35                              POOL HASHRATE: 24.74 MH/s

Hi, after a day there's a bug in DD:HH:MM.

Do you think that with new OPENCL kernel we have less stales?

Thank you!

[snoby67]

You need to upgrade the cuda driver to a driver that can run cuda 11.4 code. The latest is fine

https://github.com/sp-hash/TeamBlackMiner/issues/78

Do tou have an idea with mine ? 

[varadero]

well in fact it still does not work !!

https://zupimages.net/up/21/43/qtcd.jpg

[sp_]

well in fact it still does not work !!

dag is failing verification. Try with --dagintensity 0

[varadero]

well in fact it still does not work !!

dag is failing verification. Try with --dagintensity 0

I type the command here?
https://zupimages.net/up/21/43/mkiv.jpg

[sp_]

yes

[varadero]

ok this time it's good, thanks for all your work


I will let it run for a few hours in order to compare with trex

[moderator's note: consecutive posts merged]

[sp_]

Do you think that with new OPENCL kernel we have less stales?

Yes, same speed or faster with 1/4 the stales. The work is not complete yet.


We are close to do LHR 1 90% unlock on linux/windows..




[moderator's note: consecutive posts merged]

[dle378]

   480m [2021-10-28 21:20:37.407] ID   BOARD   HASHRATE/W   HASHRATE           AVERAGE      SHARES

I see that you are not running the latest version 1.21. Why?

I am running TBM v1.21 CUDA 11.5.

How can you tell I am not in the screenshot?

https://imgur.com/a/2Uu8IYM

[sp_]

The formatting on the left side was 480m . the new version has dd hh mm, but you seem to be on the correct version now.

[dle378]

The formatting on the left side was 480m . the new version has dd hh mm, but you seem to be on the correct version now.

How come I am not able to see the "Shares Per Minute" stats in my version of TBM 1.21?

https://imgur.com/a/CsVOfL0

[long2905]

We are close to do LHR 1 90% unlock on linux/windows..

https://i.ibb.co/FmZ2Qww/lhr-work-2.jpg

care to elaborate? i cant make sense of the screenshot. are you saying you can get 90% of the full hashrate out of LHR cards?

[P00P135]

We are close to do LHR 1 90% unlock on linux/windows..

Thats cool.  Is that with certain 455-460 drivers like lolminer does currently?