⛏Team Black Miner (ETHB3 ETHW ETC VTC KAWPOW FIROPOW ZIL +dual +tripple mining )

[sp_]

No track record for T-rex???

28 hits on virustotal in 2021..

I'm using it from beginning of 2018, it is more than 3,5 years, was beta testing it in 2018...How old is "TBM"?

I have been optimizing mining software since 2013. The t-rex ethereum kernel is a copy of the work I did back in 2014. google ccminer,

Fix "Dag verification failed. Exiting..." problem and lets see then. For me, and as few more people reported
here, this is problem number 1.

An unoptimized kernel can run at a higher clock, but it doesn't increase your profit.

If i lower memory oc (200-300 mhz!), then tbm will start, but hash speed is lower compared to t-rex even with --xintensity -1.

Keep the memclock, lower the core clock increase the tdp, change the pool.

[1714772485]

1714772485

[1714772485]

1714772485

[somaton]

So, why did you put at least 1 virus according to virustotal? Lets see how long it takes to "find" more than only 1. Most miners will be removed by windows security, but it does not mean that it is really that dangerous.
I know very well who you are, mining from 2013 and used some of your mods and kernels.
I tried different oc settings and as i mentioned before, all i get is lower hash speed, but no complainings about corrupted dag from tbm.

[kiss34000]

do you think add -lock_cclock and  --mclock command in a near future like that we dont need to have an oc software just for fix these 2 values ?

[sp_]

do you think add -lock_cclock and  --mclock command in a near future like that we dont need to have an oc software just for fix these 2 values ?

Run Nvidiaprofile inspector and disable P2 state. In P0 state the clocks run higher, and stable. So you have to retune the clocks in msi afterburner afterwards.

the reported hashrate still shows up 0 on ethermine for me on the new version

TBMiner --algo ethash --hostname eu1.ethermine.org --port 4444 --wallet %ETH_WALLET% --worker_name pckingkong --xintensity -1



I tried a couple of rigs and both show hashrate on ethermine. What is your launch config? linux or windows? are you running the v1.08 version

[moderator's note: consecutive posts merged]

[kiss34000]

do you think add -lock_cclock and  --mclock command in a near future like that we dont need to have an oc software just for fix these 2 values ?

Run Nvidiaprofile inspector and disable P2 state. In P0 state the clocks run higher, and stable. So you have to retune the clocks in msi afterburner afterwards.

have you got a tuto or a vid for see that because i never see a cg who can be oc at his maxi with just removing the P0 state .

With fix gpu core and fix ram the performance are way better

so if you can add this command like near all other mining software it will be better  it's way easier to put all value in the .bat vs tune in afterburner each card

[sp_]

https://github.com/sp-hash/TeamBlackMiner/releases/

v1.09
1. Fixed submit hashrate on ethermine (opencl)
2. Fixed duplicate share issue at woolypooly
3. Added support for more devices in amd stats
4. Fixed stratum disconnects every ~30 minutes at 2miners

TeamBlackMiner_1_09_cuda_11_2.7z
https://www.virustotal.com/gui/file/e93b73d356f6a3e62bbafd252db9260b39e3f43d86169891de1198cf1223ae56?nocache=1

TeamBlackMiner_1_09_cuda_11_4.7z
https://www.virustotal.com/gui/file/46b4715759e2ef2c4eddb6f22f260b8329764fb6137e48a84cae61d23fcee971?nocache=1

[sp_]

Sp, may be is due to the fact that no matter what I do, Chrome,Edge and Firefox doesn't let me ( and others) download it ? 1.06, 1,07, 1,08 versions

v1.09 has less false positives on virus total and will not be eaten.

windows cuda 11_2 release:

[somaton]

4. Fixed stratum disconnects every ~30 minutes at 2miners

Lets see if this fixes same problem with miningpoolhub, i can see this message in log "Have not received data from pool for 3 min" every 40 min, tried to add --timeout 300, but still complaining about 3 min.

[sp_]

the reported hashrate still shows up 0 on ethermine for me on the new version

Can you try 1.09? Is it working?

have you got a tuto or a vid for see that because i never see a cg who can be oc at his maxi with just removing the P0 state .
With fix gpu core and fix ram the performance are way better
so if you can add this command like near all other mining software it will be better  it's way easier to put all value in the .bat vs tune in afterburner each card

You set it and the rig will keep the setting until you reinstall the driver. Stable clocks nice profit. Don't need the miner to do this

https://www.reddit.com/r/RenderToken/comments/9w2rd9/how_to_use_maximum_p0_power_state_with_nvidia/

[moderator's note: consecutive posts merged]

[kiss34000]

have you got a tuto or a vid for see that because i never see a cg who can be oc at his maxi with just removing the P0 state .
With fix gpu core and fix ram the performance are way better
so if you can add this command like near all other mining software it will be better  it's way easier to put all value in the .bat vs tune in afterburner each card

You set it and the rig will keep the setting until you reinstall the driver. Stable clocks nice profit. Don't need the miner to do this

https://www.reddit.com/r/RenderToken/comments/9w2rd9/how_to_use_maximum_p0_power_state_with_nvidia/

way more complex than a fix conf in the miner like that when you do nothing no oc/uv apply when you launch your miner all setting apply at once , if all other miner software do that it's not for nothing ;it's just because it's practice to have all in 1 software VS launch or config 2 or 3 software


And you need to do it again each time a new driver out , it's your choice but i think that will block a lot of people (little miner) who use their computer for work/play and just launch the miner when they do nothing


For now i will stay on GN / Trex/lolminer who have these fonctions integrated in the miner
Perhaps one days you will change your mind and put it directly in your miner
It's the same as put eth/etc/vertcoin/zil in the same miner it's just way more usefull than have 4different miner for each Good luck for you miner you seems very promising

[dalllas]

Last working TBM was 1.06.
TBM 1.07, 1.08 and 1.09 end with timeout and restart miner:

TeamBlackMiner_1_09_cuda_11_4>TBMiner --algo ethash --hostname daggerhashimoto.eu-west.nicehash.com --port 3353 --wallet XXX --worker_name ROG

OpenCL driver version: 471.96
Cuda driver version: 11.4
Cuda runtime API version: 11.4

Welcome to Team Black Miner 1.09

GPU0 gfx902 6GB added to miner as OpenCL device
GPU1 NVIDIA GeForce RTX 3060 Laptop GPU 6GB added to miner as Cuda device
GPU0 Started CL work thread
Trying daggerhashimoto.eu-west.nicehash.com:3353 (ethash)
GPU1 Started Cuda work thread
Extranonce is set to 13445260292514643968
Pool responded successfully to subscribe
Pool responded successfully to authorize
Pool responded successfully to extranonce subscribe
Difficulty is set to 0.239089
GPU0 Starting generating ethash dag (Epoch: 443)
GPU1 Starting generating ethash dag (Epoch: 443)
GPU1 DAG generated in 1.91 seconds (4677631kb)
GPU1 XIntensity set to Dynamic
GPU1 Dag buffer verified ok!
Extranonce is set to 17083781763337027584
Extranonce is set to 246676533203173376
GPU1 Solution found in 3.48s (Submit every 40.35 seconds)
Accepted (1/1/0) Reply: 57ms

C:\TeamBlackMiner_1_09_cuda_11_4>timeout 10

Waiting for 10 seconds, press a key to continue ...

[sp_]

Last working TBM was 1.06.

Try running 2 instances of the miner. Copy the folder so that each instance run in its own folder.
One with the -Z flag (all cuda devices) the other one with --amd-only (all amd devices).

[dalllas]

Last working TBM was 1.06.

Try running 2 instances of the miner. Copy the folder so that each instance run in its own folder.
One with the -Z flag (all cuda devices) the other one with --amd-only (all amd devices).

Thank you. First instance with CUDA device work correctly but second instance with AMD device end with timeout.

[sp_]

Thank you. First instance with CUDA device work correctly but second instance with AMD device end with timeout.

Does ethereum classic mining work? Try to add 16gb of virtual memory.

[dalllas]

Thank you. First instance with CUDA device work correctly but second instance with AMD device end with timeout.

Does ethereum classic mining work? Try to add 16gb of virtual memory.

No, ETC on AMD have same problem with 16GB virtual memory settings.
Till TBM 1.06 I had some extra 2MH/s from AMD to 38MH/s from laptop RTX3060 (80W) on NiceHash ETH pool.

TBMiner --algo etchash --hostname europe.etchash-hub.miningpoolhub.com --port 20615 --wallet XXX --worker_name dalllas --amd-only
OpenCL driver version: 471.96
Cuda driver version: 11.4
Cuda runtime API version: 11.4

Welcome to Team Black Miner 1.09

GPU0 gfx902 6GB added to miner as OpenCL device
GPU0 Started CL work thread
Trying europe.etchash-hub.miningpoolhub.com:20615 (etchash)
Extranonce is set to 425201762304
Pool responded successfully to subscribe
Difficulty is set to 3.000000
GPU0 Starting generating etchash dag (Epoch: 226)
Pool responded successfully to authorize
GPU0 DAG generated in 51.07 seconds (2899966kb)
Job e94c
GPU0 XIntensity set to Dynamic
GPU0 Dag buffer verified ok!
Job e94d
Job e94e
Job e94f

C:\TeamBlackMiner_1_09_cuda_11_4>timeout 10

Waiting for  10 seconds, press a key to continue ...

[sp_]

No, ETC on AMD have same problem with 16GB virtual memory settings.
Till TBM 1.06 I had some extra 2MH/s from AMD to 38MH/s from laptop RTX3060 (80W) on NiceHash ETH

Can you try with --no-stats?

[dalllas]

No, ETC on AMD have same problem with 16GB virtual memory settings.
Till TBM 1.06 I had some extra 2MH/s from AMD to 38MH/s from laptop RTX3060 (80W) on NiceHash ETH

Can you try with --no-stats?

Yes, it is working (1.09 - both devices on Nicehash ETH pool) but with no stats.   

[vyncy]

I must be missing something obvious, but it doesn't seem to support vertcoin ? Miner itself is saying only valid options are zil, ethhash and etchash

[sp_]

https://github.com/sp-hash/SPMiner/releases

Download spminer5 for vertcoin. Copy the exe file into the folder and run the VTC+ZIl script

[vyncy]

https://github.com/sp-hash/SPMiner/releases

Download spminer5 for vertcoin. Copy the exe file into the folder and run the VTC+ZIl script

If you need other miner then it means teamblackminer doesn't support verthash. This is problem because its not possible to setup with programs like awesome miner which expect one exe file. If you are creator of both miner, why not incorporate verthash algo into team black miner ? It would make things easier for some people like me who wants to use auto switching software. Unless there is a solution I dont see