IMJim
Legendary
Offline
Activity: 1260
Merit: 1000
|
|
November 21, 2014, 12:27:09 AM |
|
(Once a month) You go into your Qt and make a new address and send all your coins to yourself Depending on how many "transactions" you have, you might have to send it to yourself in 2,3,4,5 etc chunks but if your doing this regularly you can do it all at once. You can send it to the same address to consolidate - no biggy - multiple addresses not required I do it for all my POS coins, once a month or so
(Once a year) Also - once a year, you should shut-down/exit the Qt Go into %appdata% and rename your wallet.dat file to walletOLD.dat Restart the Qt and it will make a new wallet.dat file Make a new address and copy it so you can send all your POS coins to this new address in the new wallet.dat [file] Shut-down/exit the Qt Go into %appdata% and rename this new wallet.dat file to walletNEW.dat Rename the walletOLD.dat file to wallet.dat Restart the Qt Now send ALL your POS coins to this new address that you just created. Once this wallet is empty, Shut-down/exit the Qt Go into %appdata% and rename this wallet.dat file to walletOLD.dat Rename the walletNEW.dat file to wallet.dat Restart the Qt and you'll see all your coins now in the wallet :-) DONE
You should never delete the old wallet.dat files, just-in-case you have a few addresses still in the wild that somebody might try to use/send coins to you. You should open these old wallets once a year and check them for any coins
The reason you have to do all of this is because any Qt does not like to get really full. It can lag and in really really full Qt's with a LOT of addresses, it can crash, making the wallet.dat file unstable and even possibly unusable. Better safe than sorry.
If some thing here is unclear - feel free to ask :-)
Nah, that's great info man.....thanks for sharing!
|
|
|
|
IMJim
Legendary
Offline
Activity: 1260
Merit: 1000
|
|
November 21, 2014, 01:01:00 AM |
|
KSC has a 3 coin send limitation correct?
|
|
|
|
IMJim
Legendary
Offline
Activity: 1260
Merit: 1000
|
|
November 21, 2014, 01:42:30 AM |
|
This was SwissCex that told me this, I had purchased a little over 6 KSC a while back I was trying to withdrawal and was having difficulties. They said they had to split the withdrawal into 3 pieces as the wallet wouldn't allow sending more than 3 at a time. I have not verified this myself though and don't know it to be a fact.
|
|
|
|
IMJim
Legendary
Offline
Activity: 1260
Merit: 1000
|
|
November 21, 2014, 02:27:12 AM |
|
This was SwissCex that told me this, I had purchased a little over 6 KSC a while back I was trying to withdrawal and was having difficulties. They said they had to split the withdrawal into 3 pieces as the wallet wouldn't allow sending more than 3 at a time. I have not verified this myself though and don't know it to be a fact.
Did they actually send it to you in a timely manner? Or Did they spread it out over time? no, they were back to back
|
|
|
|
manson54
Newbie
Offline
Activity: 30
Merit: 0
|
|
November 21, 2014, 02:41:58 AM |
|
(Once a month) You go into your Qt and make a new address and send all your coins to yourself Depending on how many "transactions" you have, you might have to send it to yourself in 2,3,4,5 etc chunks but if your doing this regularly you can do it all at once. You can send it to the same address to consolidate - no biggy - multiple addresses not required I do it for all my POS coins, once a month or so
(Once a year) Also - once a year, you should shut-down/exit the Qt Go into %appdata% and rename your wallet.dat file to walletOLD.dat Restart the Qt and it will make a new wallet.dat file Make a new address and copy it so you can send all your POS coins to this new address in the new wallet.dat [file] Shut-down/exit the Qt Go into %appdata% and rename this new wallet.dat file to walletNEW.dat Rename the walletOLD.dat file to wallet.dat Restart the Qt Now send ALL your POS coins to this new address that you just created. Once this wallet is empty, Shut-down/exit the Qt Go into %appdata% and rename this wallet.dat file to walletOLD.dat Rename the walletNEW.dat file to wallet.dat Restart the Qt and you'll see all your coins now in the wallet :-) DONE
You should never delete the old wallet.dat files, just-in-case you have a few addresses still in the wild that somebody might try to use/send coins to you. You should open these old wallets once a year and check them for any coins
The reason you have to do all of this is because any Qt does not like to get really full. It can lag and in really really full Qt's with a LOT of addresses, it can crash, making the wallet.dat file unstable and even possibly unusable. Better safe than sorry.
If some thing here is unclear - feel free to ask :-)
Thanks for that guide. Id like to add some more: one "transaction" in your wallet = one generated block. So if you have 1 transaction in your wallet with 70 KSC, your coin would generate 1 POS block and you'll have to wait 7 hours to genarate stake again. But if you split your coin into 700 transactions (0.1 KSC each), you will get the same reward, but you'll have enough transactions in your wallet to support the network for all 24 hours. You can see all your transactions in "Coin control" menu. I see that this is another thing we must change. User dont have to do all that things manually, it's too complicated. We will do something to this in the next releases.
|
|
|
|
manson54
Newbie
Offline
Activity: 30
Merit: 0
|
|
November 21, 2014, 02:46:24 AM |
|
This was SwissCex that told me this, I had purchased a little over 6 KSC a while back I was trying to withdrawal and was having difficulties. They said they had to split the withdrawal into 3 pieces as the wallet wouldn't allow sending more than 3 at a time. I have not verified this myself though and don't know it to be a fact.
Did they actually send it to you in a timely manner? Or Did they spread it out over time? no, they were back to back Hello! KSC has no such limitation, you can send any amount up to 1001 coins
|
|
|
|
manson54
Newbie
Offline
Activity: 30
Merit: 0
|
|
November 21, 2014, 06:38:39 PM |
|
(Once a month) You go into your Qt and make a new address and send all your coins to yourself Depending on how many "transactions" you have, you might have to send it to yourself in 2,3,4,5 etc chunks but if your doing this regularly you can do it all at once. You can send it to the same address to consolidate - no biggy - multiple addresses not required I do it for all my POS coins, once a month or so
(Once a year) Also - once a year, you should shut-down/exit the Qt Go into %appdata% and rename your wallet.dat file to walletOLD.dat Restart the Qt and it will make a new wallet.dat file Make a new address and copy it so you can send all your POS coins to this new address in the new wallet.dat [file] Shut-down/exit the Qt Go into %appdata% and rename this new wallet.dat file to walletNEW.dat Rename the walletOLD.dat file to wallet.dat Restart the Qt Now send ALL your POS coins to this new address that you just created. Once this wallet is empty, Shut-down/exit the Qt Go into %appdata% and rename this wallet.dat file to walletOLD.dat Rename the walletNEW.dat file to wallet.dat Restart the Qt and you'll see all your coins now in the wallet :-) DONE
You should never delete the old wallet.dat files, just-in-case you have a few addresses still in the wild that somebody might try to use/send coins to you. You should open these old wallets once a year and check them for any coins
The reason you have to do all of this is because any Qt does not like to get really full. It can lag and in really really full Qt's with a LOT of addresses, it can crash, making the wallet.dat file unstable and even possibly unusable. Better safe than sorry.
If some thing here is unclear - feel free to ask :-)
Thanks for that guide. Id like to add some more: one "transaction" in your wallet = one generated block. So if you have 1 transaction in your wallet with 70 KSC, your coin would generate 1 POS block and you'll have to wait 7 hours to genarate stake again. But if you split your coin into 700 transactions (0.1 KSC each), you will get the same reward, but you'll have enough transactions in your wallet to support the network for all 24 hours. You can see all your transactions in "Coin control" menu. I see that this is another thing we must change. User dont have to do all that things manually, it's too complicated. We will do something to this in the next releases. You might want look into coin-control Mine only shows dust and I can't control all of my coins - can't even see all of my coins Should I - create a new wallet.dat? and move all coins? Was there a new protocol version or wallet version?? Something is not reading right.... Hit back... Youre right about creating new wallet.dat once a year. Coin-control shows you all your spendable transactions (total balance - uncomfired - immature/blocked for staking = spendable), not only dust. You can check one transaction as input (with 1 KSC, for example) then close coin-control, create 5 addresses and send 0,2 KSC at each (add every new address using "Add Recipient" button). This way you split one transaction in 5. You don't have to create new wallet.dat for this.
|
|
|
|
manson54
Newbie
Offline
Activity: 30
Merit: 0
|
|
November 21, 2014, 06:57:59 PM |
|
Guys, did you notice the update in your wallets? install the new release from "News/Info" page. 1.1 Changes: 1. Animated browser icons 2. Checkpoint system fine-tuning 3. Minor GUI improvements. Update please!
|
|
|
|
IMJim
Legendary
Offline
Activity: 1260
Merit: 1000
|
|
November 21, 2014, 07:43:51 PM |
|
Manson.....you say upgrade to 1.1 in news tab, in my news tab it shows my current wallet version as being the latest 1.08?
|
|
|
|
manson54
Newbie
Offline
Activity: 30
Merit: 0
|
|
November 21, 2014, 08:54:15 PM |
|
Manson.....you say upgrade to 1.1 in news tab, in my news tab it shows my current wallet version as being the latest 1.08?
Try pressing "Refresh" button
|
|
|
|
IMJim
Legendary
Offline
Activity: 1260
Merit: 1000
|
|
November 21, 2014, 09:33:51 PM |
|
Manson.....you say upgrade to 1.1 in news tab, in my news tab it shows my current wallet version as being the latest 1.08?
Try pressing "Refresh" button HA! Silly me, upgrading now:-) Thanks bud! Suggestion though....perhaps have this info refresh as well when one clicks on the news tab.
|
|
|
|
manson54
Newbie
Offline
Activity: 30
Merit: 0
|
|
November 21, 2014, 10:36:47 PM |
|
Manson.....you say upgrade to 1.1 in news tab, in my news tab it shows my current wallet version as being the latest 1.08?
Try pressing "Refresh" button HA! Silly me, upgrading now:-) Thanks bud! Suggestion though....perhaps have this info refresh as well when one clicks on the news tab. Youre welcome
|
|
|
|
IMJim
Legendary
Offline
Activity: 1260
Merit: 1000
|
|
November 21, 2014, 11:29:34 PM |
|
Well that upgrade didn't go so smooth for me this time, but all is cool now.
Ran the upgrade, downloaded from wallet then closed wallet and ran the update file, told it not to import the blockchain since I was synced before the upgrade. Upon restarting the wallet, it got stuck on scanning the blockchain I think it was.....waited a few minutes before I closed it to reopen, then it came up with corrupted wallet.dat, unable to salvage. It created a .bak and new wallet.dat file.......I let it download fully at this point.
Once done I restored a backup of my wallet file, it came right up but was missing the stakes from the last 2 days. It of course immediately made up for this right after unlocking, but I don't understand why this would have been lost as those transactions should have been stored in the blockchain.......well, I think anyways....no expert in this area.
Anyways, all is good now just thought I would share my experience.
|
|
|
|
manson54
Newbie
Offline
Activity: 30
Merit: 0
|
|
November 21, 2014, 11:55:11 PM |
|
Well that upgrade didn't go so smooth for me this time, but all is cool now.
Ran the upgrade, downloaded from wallet then closed wallet and ran the update file, told it not to import the blockchain since I was synced before the upgrade. Upon restarting the wallet, it got stuck on scanning the blockchain I think it was.....waited a few minutes before I closed it to reopen, then it came up with corrupted wallet.dat, unable to salvage. It created a .bak and new wallet.dat file.......I let it download fully at this point.
Once done I restored a backup of my wallet file, it came right up but was missing the stakes from the last 2 days. It of course immediately made up for this right after unlocking, but I don't understand why this would have been lost as those transactions should have been stored in the blockchain.......well, I think anyways....no expert in this area.
Anyways, all is good now just thought I would share my experience.
Thanks for the details! Installer automatically rescans the wallet (without downloading blockchain) after every update, so if you gave it some time, it would open after rescanning. I recommend not to uncheck "import blockchain" because installer would do the backup of your wallet.dat while importing the blocks. I noticed low network weight today and thought that you were disconnected. But our nodes were at the same right chain, so I wonder which nodes you were connected to and why. Anyway we modified checkpoint system for more stability. P.S. If won't have to run update anymore, now it runs automatically after you download it.
|
|
|
|
IMJim
Legendary
Offline
Activity: 1260
Merit: 1000
|
|
November 22, 2014, 12:41:41 AM |
|
Cool man, will do it that way on the next update. Thanks for the info!
|
|
|
|
manson54
Newbie
Offline
Activity: 30
Merit: 0
|
|
November 22, 2014, 05:05:11 AM |
|
Can somebody post the update here.
My virus scanner won't allow that page to be displayed within the wallet. Unless somebody knows a fix for this issue
edit: nevermind I found the Github
https[Suspicious link removed]
So you don't see the browser inside the wallet? Your virus scanner wants to kill one of the best KSC features! Can you post its name?
|
|
|
|
crocko
|
|
November 22, 2014, 08:47:04 AM |
|
The last version is 1.0.8 or 1.1 ?
|
Find my posts helpful? Click my Trust link and rep me!
BTC: 1MqUxoDQE8Q88sDvoaLMbBJSMToSfPgKSy | | DOGE: D61Na9wjuneAn9GFLRNrHgWHHFwVfd1T7y | | LTC: 3Luo136zrqkCi53jT72FEY52GbwW1ZYi6X |
|
|
|
manson54
Newbie
Offline
Activity: 30
Merit: 0
|
|
November 22, 2014, 09:12:47 AM |
|
The last version is 1.0.8 or 1.1 ?
1.1
|
|
|
|
testcoin
|
|
November 24, 2014, 07:31:04 AM |
|
Can somebody post the update here.
My virus scanner won't allow that page to be displayed within the wallet. Unless somebody knows a fix for this issue
edit: nevermind I found the Github
https[Suspicious link removed]
So you don't see the browser inside the wallet? Your virus scanner wants to kill one of the best KSC features! Can you post its name? avast edit: Anybody want to recommend a better virus scanner? Sure. Use virustotal please. It also includes the latest virus definitions of your avast https://www.virustotal.com/en/file/37a75d093d0291d64a97122f506d7cf5e09b1695a5b4f7e890f4633c33af4d07/analysis/1416813901/I use it before I need to start EVERY new wallet for EVERY altcoin
|
|
|
|
chronicsky
Legendary
Offline
Activity: 2828
Merit: 1222
Just looking for peace
|
|
November 24, 2014, 03:55:43 PM |
|
omg! i missed so much it's all so kool! bad thing i can't see it , my laptop is broken and is at service center since a week , that's why i thought i must not look at this KSC thread but damn! man i want to use the new wallet ASAP Great work Dev!
|
|
|
|
|