SpeedDemon13 (OP)
|
|
April 06, 2014, 04:35:00 PM |
|
readme.txt is very useful:
... IMPORTANT NOTE ABOUT MINING XPM ON YPOOL
You cannot estimate your eranings until you run miner for at least 24 hours. A lot of people start miner for 3-6 hours and then claim that they earn too small amounts. Ypool calculates earnings based on last 160 blocks that were found by Ypool, so you need to wait at least 5*160 blocks until you see real earnings, it is about 12 hours. Another important thing is that Ypool gives you big share values only when you found 9ch or 10ch shares, it takes several hours to find such shares, so to estimate your profit you need at least 24 hours of mining.
So the correct way to calculate earnings is: mine for 24 hours and then check your earning per block in pool statistics, and multiplicate it by blocks that ypool finds per 24 hours. Or mine for 48 hours and then take earnings for last 24 hours. ...
I updated with a copy of the read me. v1.4 can't be download.
|
CRYPTSY exchange: https://www.cryptsy.com/users/register?refid=9017 BURST= BURST-TE3W-CFGH-7343-6VM6R BTC=1CNsqGUR9YJNrhydQZnUPbaDv6h4uaYCHv ETH=0x144bc9fe471d3c71d8e09d58060d78661b1d4f32 SHF=0x13a0a2cb0d55eca975cf2d97015f7d580ce52d85 EXP=0xd71921dca837e415a58ca0d6dd2223cc84e0ea2f SC=6bdf9d12a983fed6723abad91a39be4f95d227f9bdb0490de3b8e5d45357f63d564638b1bd71 CLAMS=xGVTdM9EJpNBCYAjHFVxuZGcqvoL22nP6f SOIL=0x8b5c989bc931c0769a50ecaf9ffe490c67cb5911
|
|
|
Judgment
Newbie
Offline
Activity: 26
Merit: 0
|
|
April 06, 2014, 04:35:51 PM |
|
v1.4 released, mining speed is faster by 10% now.
This information is not correct. I am seeing an increase of 16% in mining speed. My 290s now mine at 80k each. Edit: Getting total round time of 570-580, varies a little card by card, cards running stock clocks. Using I7 4770k.
|
|
|
|
SpeedDemon13 (OP)
|
|
April 06, 2014, 04:38:00 PM |
|
v1.4 released, mining speed is faster by 10% now.
This information is not correct. I am seeing an increase of 16% in mining speed. My 290s now mine at 80k each. What time are you getting?
|
CRYPTSY exchange: https://www.cryptsy.com/users/register?refid=9017 BURST= BURST-TE3W-CFGH-7343-6VM6R BTC=1CNsqGUR9YJNrhydQZnUPbaDv6h4uaYCHv ETH=0x144bc9fe471d3c71d8e09d58060d78661b1d4f32 SHF=0x13a0a2cb0d55eca975cf2d97015f7d580ce52d85 EXP=0xd71921dca837e415a58ca0d6dd2223cc84e0ea2f SC=6bdf9d12a983fed6723abad91a39be4f95d227f9bdb0490de3b8e5d45357f63d564638b1bd71 CLAMS=xGVTdM9EJpNBCYAjHFVxuZGcqvoL22nP6f SOIL=0x8b5c989bc931c0769a50ecaf9ffe490c67cb5911
|
|
|
jgle
Member
Offline
Activity: 85
Merit: 10
|
|
April 06, 2014, 04:45:11 PM |
|
readme.txt is very useful:
... IMPORTANT NOTE ABOUT XPM ON YPOOL
You cannot estimate your eranings until you run miner for at least 24 hours. A lot of people start miner for 3-6 hours and then claim that they earn too small amounts. Ypool calculates earnings based on last 160 blocks that were found by Ypool, so you need to wait at least 5*160 blocks until you see real earnings, it is about 12 hours. Another important thing is that Ypool gives you big share values only when you found 9ch or 10ch shares, it takes several hours to find such shares, so to estimate your profit you need at least 24 hours of .
So the correct way to calculate earnings is: mine for 24 hours and then check your earning per block in pool statistics, and multiplicate it by blocks that ypool finds per 24 hours. Or mine for 48 hours and then take earnings for last 24 hours. ...
Thank you for your reply!
|
|
|
|
Claymore
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
April 06, 2014, 04:47:32 PM |
|
v1.4 released, mining speed is faster by 10% now.
This information is not correct. I am seeing an increase of 16% in mining speed. My 290s now mine at 80k each. Edit: Getting total round time of 570-580, varies a little card by card, cards running stock clocks. Using I7 4770k. Yes, it is possible. For example, I get about 12-13% speedup on 290X. But it depends on hardware so I stated non-optimistic value
|
|
|
|
kev7112001
|
|
April 06, 2014, 04:48:25 PM |
|
v1.4 released, mining speed is faster by 10% now.
This information is not correct. I am seeing an increase of 16% in mining speed. My 290s now mine at 80k each. Edit: Getting total round time of 570-580, varies a little card by card, cards running stock clocks. Using I7 4770k. i was getting that with 1.3 actually 90k but with higher clocks
|
MCXNOW MODERATOR
|
|
|
Claymore
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
April 06, 2014, 05:07:14 PM |
|
v1.4 released, mining speed is faster by 10% now.
This information is not correct. I am seeing an increase of 16% in mining speed. My 290s now mine at 80k each. Edit: Getting total round time of 570-580, varies a little card by card, cards running stock clocks. Using I7 4770k. i was getting that with 1.3 actually 90k but with higher clocks So you will get 100k now.
|
|
|
|
kev7112001
|
|
April 06, 2014, 05:28:51 PM |
|
v1.4 released, mining speed is faster by 10% now.
This information is not correct. I am seeing an increase of 16% in mining speed. My 290s now mine at 80k each. Edit: Getting total round time of 570-580, varies a little card by card, cards running stock clocks. Using I7 4770k. i was getting that with 1.3 actually 90k but with higher clocks So you will get 100k now. its possible
|
MCXNOW MODERATOR
|
|
|
drkman
|
|
April 06, 2014, 06:41:06 PM |
|
Tried 5 different bat files for a 5 card 280x rig and once I started the 3rd bat file the system became unresponsive and eventually locked up. Showes as mined .000086 XPM after about 1 hour.
Anyone get a 5 card 280x rig stable with the Claymore GPU miner? Just wondering what I need to change. Running stock with no overclocks.
|
|
|
|
Starscream
|
|
April 06, 2014, 06:49:02 PM |
|
Tried this, but I gotta say that the CPU is a huge limiting factor here. My R9 290 are getting 57k each probably because I got a Pentium G2030 powering my rig (had to use -ss 2).
I am running v1.4 and I saw an exact 10% increase from v1.3 (52k before).
I still don't know if it's profitable, haven't mined for 24h yet.
|
|
|
|
slimdim
|
|
April 06, 2014, 06:54:53 PM |
|
it is possible an example of a bat file for 280x
my 2x 280x - ch/h: [ 44677] ch/h: [ 41863]
and make that all cards were started from 1 bat file
|
|
|
|
precrime3
Member
Offline
Activity: 84
Merit: 10
PM for journalist,typing,and data entry services.
|
|
April 06, 2014, 06:57:42 PM |
|
This no work with 7xxx series?
|
|
|
|
nish2011
Member
Offline
Activity: 93
Merit: 250
|
|
April 06, 2014, 07:23:09 PM |
|
Hey, does overclocking the cpu give better results, currently running 4x290x with i7 4770k with 75-85% cpu utilization, and lastly would running the system ram at faster speed give any improvements? Thanks
|
|
|
|
SpeedDemon13 (OP)
|
|
April 06, 2014, 07:25:15 PM |
|
This no work with 7xxx series?
It works for the HD7xxx series, but ideally for 290/290x. Worked for my HD7970.
|
CRYPTSY exchange: https://www.cryptsy.com/users/register?refid=9017 BURST= BURST-TE3W-CFGH-7343-6VM6R BTC=1CNsqGUR9YJNrhydQZnUPbaDv6h4uaYCHv ETH=0x144bc9fe471d3c71d8e09d58060d78661b1d4f32 SHF=0x13a0a2cb0d55eca975cf2d97015f7d580ce52d85 EXP=0xd71921dca837e415a58ca0d6dd2223cc84e0ea2f SC=6bdf9d12a983fed6723abad91a39be4f95d227f9bdb0490de3b8e5d45357f63d564638b1bd71 CLAMS=xGVTdM9EJpNBCYAjHFVxuZGcqvoL22nP6f SOIL=0x8b5c989bc931c0769a50ecaf9ffe490c67cb5911
|
|
|
Claymore
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
April 06, 2014, 07:31:56 PM |
|
Hey, does overclocking the cpu give better results, currently running 4x290x with i7 4770k with 75-85% cpu utilization, and lastly would running the system ram at faster speed give any improvements? Thanks
CPU load must be <=80% for best performance, so you can try to overclock CPU and see if it helps. Overclocking RAM is almost useless.
|
|
|
|
nish2011
Member
Offline
Activity: 93
Merit: 250
|
|
April 06, 2014, 07:34:12 PM |
|
Thanks, I will overclock my cpu Hey, does overclocking the cpu give better results, currently running 4x290x with i7 4770k with 75-85% cpu utilization, and lastly would running the system ram at faster speed give any improvements? Thanks
CPU load must be <=80% for best performance, so you can try to overclock CPU and see if it helps. Overclocking RAM is almost useless.
|
|
|
|
slimdim
|
|
April 06, 2014, 07:34:43 PM |
|
what commands to disperse gpu?
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
April 06, 2014, 08:01:28 PM |
|
what commands to disperse gpu?
"take the hammer and hit the gpu !" That command to someone might disperse well your gpu
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
precrime3
Member
Offline
Activity: 84
Merit: 10
PM for journalist,typing,and data entry services.
|
|
April 06, 2014, 08:54:31 PM |
|
This no work with 7xxx series?
It works for the HD7xxx series, but ideally for 290/290x. Worked for my HD7970. Oh okay, will test out on my 7750, and report back!
|
|
|
|
Judgment
Newbie
Offline
Activity: 26
Merit: 0
|
|
April 06, 2014, 09:05:12 PM |
|
v1.4 released, mining speed is faster by 10% now.
This information is not correct. I am seeing an increase of 16% in mining speed. My 290s now mine at 80k each. Edit: Getting total round time of 570-580, varies a little card by card, cards running stock clocks. Using I7 4770k. Ok I just increased the core clock to 1200 mhz, im getting 95k ch/h (4ch) and round times of around 490. The nice thing is im still using less electricity than mining scrypt on stock clocks.
|
|
|
|
|