Claymore XPM GPU Miner discussion

[SpeedDemon13]

First of all bravo for your work, will be using 10% fee.


I have 2* 7950 @ 445 / 1 r9 290 @ 275 / 1 7870 @ 800+

Now a couple of questions:

1) Do I have to keep minning 24/7 to get results or not? Because the r9 290 & 7870 do some gaming too (some hours per day), should I use them on another coin and leave the 7950's 24/7

2)Has anyone compared it to MAXcoin average income per day onsay a 280X or r9 290?

Personally, I would game with the 7870, and mine with the 290 and 7950. If your trying to maximize profits.

It takes about 12 hours at least to get a rough estimate, 24 hours would be more ideal. It would be best to run it 48 hours to 72 hours to get a more exact estimate. Use the last 24 hours of mining from 48~72 hours to get a more conclusive estimate.

[Strannik-74]

Celeron G1620 2xMSI 280X 1120/1500
v1.5 GPU Load 75-81%
v2.0 GPU Load 97-99%

Reinstall catalyst v13.12, reboot computer and disable overclocking.

Reinstall catalyst v13.12, reboot computer

[Claymore]

Reinstall catalyst v13.12, reboot computer and disable overclocking.

Everything is ok now, you can check it by pressing "m" and comparing number with numbers from readme. But I see from screenshot you get 125k 4ch/h, it's ok.

[slimdim]

i get 95 4ch/h on vapor-x 280x. it is ok? catalist 13.12 and 1100 / 1500

[aikklond]

First of all bravo for your work, will be using 10% fee.


I have 2* 7950 @ 445 / 1 r9 290 @ 275 / 1 7870 @ 800+

Now a couple of questions:

1) Do I have to keep minning 24/7 to get results or not? Because the r9 290 & 7870 do some gaming too (some hours per day), should I use them on another coin and leave the 7950's 24/7

2)Has anyone compared it to MAXcoin average income per day onsay a 280X or r9 290?

Personally, I would game with the 7870, and mine with the 290 and 7950. If your trying to maximize profits.

It takes about 12 hours at least to get a rough estimate, 24 hours would be more ideal. It would be best to run it 48 hours to 72 hours to get a more exact estimate. Use the last 24 hours of mining from 48~72 hours to get a more conclusive estimate.

So it is imperative to be on 24/7? To say it simple If I break operation for say 3 hours per day, will I lose more than 3 hours work?


Moreover I am on 14.3 and everything is working fine, should i revert to 13.12?

[drmavis]

Celeron G1620 2xMSI 280X 1120/1500
v1.5 GPU Load 75-81%
v2.0 GPU Load 97-99%

Reinstall catalyst v13.12, reboot computer and disable overclocking.

Reinstall catalyst v13.12, reboot computer

This may be a question for Claymore, but what is the best measure for hashing speed? Is it the Total Round Time or the 4ch/hr? Or are they inversely proportional?

[Claymore]

So it is imperative to be on 24/7? To say it simple If I break operation for say 3 hours per day, will I lose more than 3 hours work?
Moreover I am on 14.3 and everything is working fine, should i revert to 13.12?

If you don't mine for 3 hours you will lose earning only for 3 hours.
Anyway you can install 13.12 and compare mining speed to 14.3. Then select best driver version. Or just keep current version that you use if you think it's ok for you.

[aikklond]

So it is imperative to be on 24/7? To say it simple If I break operation for say 3 hours per day, will I lose more than 3 hours work?
Moreover I am on 14.3 and everything is working fine, should i revert to 13.12?

If you don't mine for 3 hours you will lose earning only for 3 hours.
Anyway you can install 13.12 and compare mining speed to 14.3. Then select best driver version. Or just keep current version that you use if you think it's ok for you.

I am getting 285 on my r9 290 (1050/1300) on 14.3 drivers.

I am getting 445 on my 7950's (1050/1350) on 13.12 drivers.

You think these scores are normal/ok?

[crossf4de]

Celeron G1620 2xMSI 280X 1120/1500
v1.5 GPU Load 75-81%
v2.0 GPU Load 97-99%

Reinstall catalyst v13.12, reboot computer and disable overclocking.

Reinstall catalyst v13.12, reboot computer
http://clip2net.com/clip/m0/thumb640/1397068954-clip-277kb.png

nice one you used my infos?

[tristartek]

Is it necessary to have:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

?

[Claymore]

Is it necessary to have:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

?

At starting miner will tell you about GPU_MAX_ALLOC_PERCENT when necessary. If you don't see any message anything about it (it means that it will show "HashCnt = 512") - everything is ok already.

[Strannik-74]

nice one you used my infos?

Yes thank you. Reduced memory frequencies and voltage on the GPU 1081mV Sapphire TRIXX

[scyth3]

Does the -ss 2 option still do anything with version 2.0?

[dylanchang]

g1610 h61b 8G 270*6 doesnt work.
Only main card plug on pcie 16x can get 60k 4ch,98% GPU useage.
the others got 99% GPU useage at the first 2 senonds,and drop to 0.
it can run any other crypto like: scrypt,scrypt-N,X11 etc, use all 6 cards.
an other rig with 280*4  works fine, 110k 4ch per card.

[gilad215]

Will you guys please take a look?



this is my stats if you look at them i have 1 rig with 2x290.
why are the stats so dieffrent? is it ok?

both of them show the same TRT. 400+-

thanks for help

[primer10]

Awww ..     I am drooling all over  .. when will we have a Linux version?

[neza777]

 using V1.5
http://s26.postimg.org/gfra1292t/Capture_v1_5.jpg
 Using V2.0
http://s26.postimg.org/ag3ixeoad/Capture_V2_0.jpg
it,s ok or not for V2.0 >> 2X r9 280x  ?

[Strannik-74]

it,s ok or not for V2.0 >> 2X r9 280x  ?

That's fine 2x280X, but you are too slow.

[neza777]

 [/quote]
http://clip2net.com/clip/m0/thumb640/1397102955-clip-62kb.png
That's fine 2x280X, but you are too slow.
[/quote]
i see but i try to  reinstal driver restart rig but had a same result any advice?

[glinko]

I see that 1 share in 10ch column... What it means? if only i mined solo i find 1 block? that's right? or it must be in a 11ch column?