★★★ MaruCoin ★★★ NEW X13 ALGO ! ★★★ MINE NOW ! [KGW+DGW] ★★★ NO IPO/PM EXCHANGE!

[braxx]

mine wouldn't sync also
I've added the nodes, nothing

I've deleted the old blockchain (excl wallet)

SYNCED 

[MarcusDe]

Windows wallet - It works just fine and syncs.
Delete all but your config na wallet.dat file, run client.


04:51:20
getblockhash 2047
04:51:20
0000000035cbe5efabdb67725cb3e975ae4a28abb58cdbbdfef610a05413c01c

Same hash on my linux.

[deathchuck]

The wallet works.   Just go to the console of your qt client and add the nodes.

Over 3,000 Maru traded so far at atomic-trade.com!

It's not work

[hero18688]

Add these nodes if you want to sync with my pools

Code:

addnode=maru.altmine.net
addnode=sg.altmine.net
addnode=us.altmine.net

Code:

./marucoind getblockhash 2047
0000000035cbe5efabdb67725cb3e975ae4a28abb58cdbbdfef610a05413c01c

Hi,rejects is too much in your pool.Any solution?
[P]ool management [G]PU management ettings [D]isplay options [Q]uit
 GPU 0:  60.0C 2448RPM | 1.439M/1.437Mh/s | R: 34.9% HW:0 WU:0.027/m I:13
 GPU 1:  70.0C 2256RPM | 1.436M/1.437Mh/s | R: 35.9% HW:0 WU:0.026/m I:13
 GPU 2:  68.0C 2283RPM | 1.437M/1.437Mh/s | R: 32.4% HW:0 WU:0.028/m I:13

[braxx]

Add these nodes if you want to sync with my pools

Code:

addnode=maru.altmine.net
addnode=sg.altmine.net
addnode=us.altmine.net

Code:

./marucoind getblockhash 2047
0000000035cbe5efabdb67725cb3e975ae4a28abb58cdbbdfef610a05413c01c

Hi,rejects is too much in your pool.Any solution?
[P]ool management [G]PU management [*S]ettings [D]isplay options [Q]uit
 GPU 0:  60.0C 2448RPM | 1.439M/1.437Mh/s | R: 34.9% HW:0 WU:0.027/m I:13
 GPU 1:  70.0C 2256RPM | 1.436M/1.437Mh/s | R: 35.9% HW:0 WU:0.026/m I:13
 GPU 2:  68.0C 2283RPM | 1.437M/1.437Mh/s | R: 32.4% HW:0 WU:0.028/m I:13

have you set query = 0
scantime & expiry = 1

[braxx]

dstorm,

is there any way the miner diff would be a little lower
accepted shares coming in very slowly (1 every 30/60 seconds)

at the supernova pool the miner diff was 0.008 / 0.010  now it is 0.022 /0.030
that 1 reject after 10 shares gave me a 10% reject :-D

[davetheshrew]

wallet stuck on block 2000, deleted everything except conf and wallet dat and added nodes..

EDIT: just synced, took a while

[hero18688]

Add these nodes if you want to sync with my pools

Code:

addnode=maru.altmine.net
addnode=sg.altmine.net
addnode=us.altmine.net

Code:

./marucoind getblockhash 2047
0000000035cbe5efabdb67725cb3e975ae4a28abb58cdbbdfef610a05413c01c

Hi,rejects is too much in your pool.Any solution?
[P]ool management [G]PU management [*S]ettings [D]isplay options [Q]uit
 GPU 0:  60.0C 2448RPM | 1.439M/1.437Mh/s | R: 34.9% HW:0 WU:0.027/m I:13
 GPU 1:  70.0C 2256RPM | 1.436M/1.437Mh/s | R: 35.9% HW:0 WU:0.026/m I:13
 GPU 2:  68.0C 2283RPM | 1.437M/1.437Mh/s | R: 32.4% HW:0 WU:0.028/m I:13

have you set query = 0
scantime & expiry = 1

Hi,I haven't got much experience mining on p2p pool.Do you mean "queue = 0" by "query = 0"?
Can I use these 3 settings to normal stratum pools?

[dbt1033]

Add these nodes if you want to sync with my pools

Code:

addnode=maru.altmine.net
addnode=sg.altmine.net
addnode=us.altmine.net

Code:

./marucoind getblockhash 2047
0000000035cbe5efabdb67725cb3e975ae4a28abb58cdbbdfef610a05413c01c

Hi,rejects is too much in your pool.Any solution?
[P]ool management [G]PU management [*S]ettings [D]isplay options [Q]uit
 GPU 0:  60.0C 2448RPM | 1.439M/1.437Mh/s | R: 34.9% HW:0 WU:0.027/m I:13
 GPU 1:  70.0C 2256RPM | 1.436M/1.437Mh/s | R: 35.9% HW:0 WU:0.026/m I:13
 GPU 2:  68.0C 2283RPM | 1.437M/1.437Mh/s | R: 32.4% HW:0 WU:0.028/m I:13

have you set query = 0
scantime & expiry = 1

Hi,I haven't got much experience mining on p2p pool.Do you mean "queue = 0" by "query = 0"?
Can I use these 3 settings to normal stratum pools?

-Q 0
and
--scan-time 1
and
--expiry 1

[braxx]

Add these nodes if you want to sync with my pools

Code:

addnode=maru.altmine.net
addnode=sg.altmine.net
addnode=us.altmine.net

Code:

./marucoind getblockhash 2047
0000000035cbe5efabdb67725cb3e975ae4a28abb58cdbbdfef610a05413c01c

Hi,rejects is too much in your pool.Any solution?
[P]ool management [G]PU management [*S]ettings [D]isplay options [Q]uit
 GPU 0:  60.0C 2448RPM | 1.439M/1.437Mh/s | R: 34.9% HW:0 WU:0.027/m I:13
 GPU 1:  70.0C 2256RPM | 1.436M/1.437Mh/s | R: 35.9% HW:0 WU:0.026/m I:13
 GPU 2:  68.0C 2283RPM | 1.437M/1.437Mh/s | R: 32.4% HW:0 WU:0.028/m I:13

have you set query = 0
scantime & expiry = 1

Hi,I haven't got much experience mining on p2p pool.Do you mean "queue = 0" by "query = 0"?
Can I use these 3 settings to normal stratum pools?

yeah sorry...
I ment queue...

[hero18688]

-Q 0
and
--scan-time 1
and
--expiry 1

Can I use these 3 settings to normal stratum pools?

[dbt1033]

-Q 0
and
--scan-time 1
and
--expiry 1

Can I use these 3 settings to normal stratum pools?

No, that's just for p2pools mostly.

I use --scan-time 5  --expiry 20 for normal pools, but others use different settings

[deathchuck]

Everything is ok now, mining MARU with the 1st X13 coin.

[shai_]

i compiled the GPU miner on linux
on solo it works fine, and also worked in suprnova until it went down
but can't connect to the p2pool 'Waiting for work to be available from pools.'

also wallet syncing doesn't work. even if i delete blockchain, peers.dat and adding altminer's nodes

[Yepachuchu]

I'm surprised nobody is trading yet, been watching both exchanges a while now. Trade at https://www.Atomic-Trade.com?refid=MT7XT2I3 btw, not sure how trustworthy europex is considering I never see trades on it aside from what I suspect is one person trading to themselves to make the appearance of inflated value on coins.

[deathmul]

Which pool is alive?

[Yepachuchu]

Which pool is alive?

http://maru.altmine.net/static/

[ocminer]

I will update suprnova later this evening, waiting for a PM from the devs.

[deathmul]

Which pool is alive?

http://maru.altmine.net/static/

Thanks

[ocminer]

Which pool is alive?

http://maru.altmine.net/static/

Thanks

i am not sure if this pool is on the correct fork as i cannot re-sync a "fresh" wallet to this nodes...