[ANN] [NAUT] Nautiluscoin - First Coin w/Stabilization Fund - Digishield

[kcanup]

suprised the hashrate is so low, where's all the miners! 

Good for us!! 

[Zackgeno96]

suprised the hashrate is so low, where's all the miners! 

Good for us!! 

i guess so xD 

[PilotofBTC]

Has anyone got the wallet to sync?

My wallet has been synched and syncs fine.  

Did you use a .conf file? What OS do you have (I'm on windows 7 - 64bit)?

Are you using the conf file from the PHI coin site?

Yes, I've tried it, but it didn't work. Can someone show what the file should look like. I'm using 0fee pool.

Nautiluscoin.conf
addnode=54.186.223.183
addnode=54.187.101.97
addnode=74.208.230.160
addnode=184.155.218.183
addnode=71.227.74.98
addnode=188.194.8.82
addnode=109.201.154.157
addnode=184.155.218.183

Add these nodes then you ll be fine bro

I finally figured it out, doh! I misspelled Nautilus when making the .conf file. All good now, thanks.

Where did you put the conf file? I'm still unable to get it to connect. When I try to use addnode try with the cli every address gives me an error:can't connect to server.

Do you have to put the RPCpassword and stuff.. or just the addnode lines?

[Zackgeno96]

where's the wallet link? not the nautilus github link... there's no wallet in there

[PilotofBTC]

where's the wallet link? not the nautilus github link... there's no wallet in there

http://www.nautiluscoin.com/

[Zackgeno96]

where's the wallet link? not the nautilus github link... there's no wallet in there

http://www.nautiluscoin.com/

thanks!

[kcanup]

Has anyone got the wallet to sync?

My wallet has been synched and syncs fine.  

Did you use a .conf file? What OS do you have (I'm on windows 7 - 64bit)?

Are you using the conf file from the PHI coin site?

Yes, I've tried it, but it didn't work. Can someone show what the file should look like. I'm using 0fee pool.

Nautiluscoin.conf
addnode=54.186.223.183
addnode=54.187.101.97
addnode=74.208.230.160
addnode=184.155.218.183
addnode=71.227.74.98
addnode=188.194.8.82
addnode=109.201.154.157
addnode=184.155.218.183

Add these nodes then you ll be fine bro

I finally figured it out, doh! I misspelled Nautilus when making the .conf file. All good now, thanks.

Where did you put the conf file? I'm still unable to get it to connect. When I try to use addnode try with the cli every address gives me an error:can't connect to server.

Put .conf file in Nautiluscoin folder (inside %appdata%roaming%NautilusCoin folder)

[eliteminerpool]

Im surprised not many people have hopped on this yet, one of the only coins I actually rented rigs for.

[PilotofBTC]

Has anyone got the wallet to sync?

My wallet has been synched and syncs fine.  

Did you use a .conf file? What OS do you have (I'm on windows 7 - 64bit)?

Are you using the conf file from the PHI coin site?

Yes, I've tried it, but it didn't work. Can someone show what the file should look like. I'm using 0fee pool.

Nautiluscoin.conf
addnode=54.186.223.183
addnode=54.187.101.97
addnode=74.208.230.160
addnode=184.155.218.183
addnode=71.227.74.98
addnode=188.194.8.82
addnode=109.201.154.157
addnode=184.155.218.183

Add these nodes then you ll be fine bro

I finally figured it out, doh! I misspelled Nautilus when making the .conf file. All good now, thanks.

Where did you put the conf file? I'm still unable to get it to connect. When I try to use addnode try with the cli every address gives me an error:can't connect to server.

Put .conf file in Nautiluscoin folder (inside %appdata%roaming%NautilusCoin folder)

Done... still not work. What uPnP port does this use?

[Zackgeno96]

Im surprised not many people have hopped on this yet, one of the only coins I actually rented rigs for.

metoo

feel's nice to be the number 1 miner on a coin xDDDD

[PilotofBTC]

Im surprised not many people have hopped on this yet, one of the only coins I actually rented rigs for.

metoo

Is it possible to CPU mine this?

[Zackgeno96]

Im surprised not many people have hopped on this yet, one of the only coins I actually rented rigs for.

metoo

Is it possible to CPU mine this?

You can cpu mine omost anything but it's pretty pointless =/ your best bet is betarigs.com if you have an extra 0.05- 0.06 btc laying around u can rent 60 mh like me xD for 3 hours

[Zackgeno96]

can this be turned into POS after block 100k.?

[kcanup]

Has anyone got the wallet to sync?

My wallet has been synched and syncs fine.  

Did you use a .conf file? What OS do you have (I'm on windows 7 - 64bit)?

Are you using the conf file from the PHI coin site?

Yes, I've tried it, but it didn't work. Can someone show what the file should look like. I'm using 0fee pool.

Nautiluscoin.conf
addnode=54.186.223.183
addnode=54.187.101.97
addnode=74.208.230.160
addnode=184.155.218.183
addnode=71.227.74.98
addnode=188.194.8.82
addnode=109.201.154.157
addnode=184.155.218.183

Add these nodes then you ll be fine bro

I finally figured it out, doh! I misspelled Nautilus when making the .conf file. All good now, thanks.

Where did you put the conf file? I'm still unable to get it to connect. When I try to use addnode try with the cli every address gives me an error:can't connect to server.

Put .conf file in Nautiluscoin folder (inside %appdata%roaming%NautilusCoin folder)

Done... still not work. What uPnP port does this use?

rpcport=1161
port=11161 They are the ports i copied from website bro, but only for wallet sync you dont need them, they used for mining. Adding add nodes are enough to connect and synchronize  your wallet, check carefully what you did wrong..

[PilotofBTC]

Has anyone got the wallet to sync?

My wallet has been synched and syncs fine.  

Did you use a .conf file? What OS do you have (I'm on windows 7 - 64bit)?

Are you using the conf file from the PHI coin site?

Yes, I've tried it, but it didn't work. Can someone show what the file should look like. I'm using 0fee pool.

Nautiluscoin.conf
addnode=54.186.223.183
addnode=54.187.101.97
addnode=74.208.230.160
addnode=184.155.218.183
addnode=71.227.74.98
addnode=188.194.8.82
addnode=109.201.154.157
addnode=184.155.218.183

Add these nodes then you ll be fine bro

I finally figured it out, doh! I misspelled Nautilus when making the .conf file. All good now, thanks.

Where did you put the conf file? I'm still unable to get it to connect. When I try to use addnode try with the cli every address gives me an error:can't connect to server.

Put .conf file in Nautiluscoin folder (inside %appdata%roaming%NautilusCoin folder)

Done... still not work. What uPnP port does this use?

rpcport=1161
port=11161 They are the ports i copied from website bro, but only for wallet sync you dont need them, they used for mining. Adding add nodes are enough to connect and synchronize  your wallet, check carefully what you did wrong..

Yea, I'm totally at a loss. Double checked path, file is there, spelled right. Only has the add nodes in it. Should there be a c/r after the final addnode? Does it matter.

When I check the network tab in the debug it is empty. It's like its not even trying to connect. Only other wallet I've used is Primecoin and it needed zero config, worked out of the box. Any tips to troubleshoot would be great.

[eliteminerpool]

Im surprised not many people have hopped on this yet, one of the only coins I actually rented rigs for.

metoo

feel's nice to be the number 1 miner on a coin xDDDD

Nice I am currently pushing 45mhs on the 0feepool, second place feels good to

[whatdidshedo]

Im surprised not many people have hopped on this yet, one of the only coins I actually rented rigs for.

metoo

feel's nice to be the number 1 miner on a coin xDDDD

Nice I am currently pushing 45mhs on the 0feepool, second place feels good to

i rented rigs diff low enough , in case you want to rent betarigs.com

PS i think people missed this one not being on the calender

[kcanup]

Has anyone got the wallet to sync?

My wallet has been synched and syncs fine.  

Did you use a .conf file? What OS do you have (I'm on windows 7 - 64bit)?

Are you using the conf file from the PHI coin site?

Yes, I've tried it, but it didn't work. Can someone show what the file should look like. I'm using 0fee pool.

Nautiluscoin.conf
addnode=54.186.223.183
addnode=54.187.101.97
addnode=74.208.230.160
addnode=184.155.218.183
addnode=71.227.74.98
addnode=188.194.8.82
addnode=109.201.154.157
addnode=184.155.218.183

Add these nodes then you ll be fine bro

I finally figured it out, doh! I misspelled Nautilus when making the .conf file. All good now, thanks.

Where did you put the conf file? I'm still unable to get it to connect. When I try to use addnode try with the cli every address gives me an error:can't connect to server.

Put .conf file in Nautiluscoin folder (inside %appdata%roaming%NautilusCoin folder)

Done... still not work. What uPnP port does this use?

rpcport=1161
port=11161 They are the ports i copied from website bro, but only for wallet sync you dont need them, they used for mining. Adding add nodes are enough to connect and synchronize  your wallet, check carefully what you did wrong..

Yea, I'm totally at a loss. Double checked path, file is there, spelled right. Only has the add nodes in it. Should there be a c/r after the final addnode? Does it matter.

When I check the network tab in the debug it is empty. It's like its not even trying to connect. Only other wallet I've used is Primecoin and it needed zero config, worked out of the box. Any tips to troubleshoot would be great.

no c /r or anything bro.. its just simple you have to make .conf file putting all nodes on notepad saving a file called Nautiluscoin.conf as a file name then place it in your roaming /Nautiluscoin folder.. If you think you cant get it working anymore i cud help you if you give me teamviewer access to your computer.

[PilotofBTC]

no c /r or anything bro.. its just simple you have to make .conf file putting all nodes on notepad saving a file called Nautiluscoin.conf as a file name then place it in your roaming /Nautiluscoin folder.. If you think you cant get it working anymore i cud help you if you give me teamviewer access to your computer.

Yea, I'm 99% sure I've done all that correctly. I'm a developer, so I know my way around text files fairly well. I just don't know why the network debug console doesn't show any activity, I would expect that it should.

I think it might be trying to map a port using uPnP that we are already using. Which is why I asked if you guys know what port this maps. I may have to set up a proxy or something.

I appreciate your offer but I'm just headed out. I was able to start mining without this syncing anyway, so no hurry to get it synced.

[kcanup]

no c /r or anything bro.. its just simple you have to make .conf file putting all nodes on notepad saving a file called Nautiluscoin.conf as a file name then place it in your roaming /Nautiluscoin folder.. If you think you cant get it working anymore i cud help you if you give me teamviewer access to your computer.

Yea, I'm 99% sure I've done all that correctly. I'm a developer, so I know my way around text files fairly well. I just don't know why the network debug console doesn't show any activity, I would expect that it should.

I think it might be trying to map a port using uPnP that we are already using. Which is why I asked if you guys know what port this maps. I may have to set up a proxy or something.

I appreciate your offer but I'm just headed out. I was able to start mining without this syncing anyway, so no hurry to get it synced.

Check if your firewall is blocking any connection to your PHI wallet, our wallet is fully sync every latest block so any issue with you must be in your computer!