pinwc4
Member
Offline
Activity: 100
Merit: 10
|
|
May 05, 2014, 09:34:32 PM |
|
Can you post sample batch file for GPU miner Fresh 64-bit Windows miners with stratum fixes: For GPU miner pass -t X option where X is a number of GPUs. GPU miner has to be executed from the directory where kernel directory is located. I do not have a batch file but a command like this should work: minerd-gpu.exe -o stratum+tcp://rlt.blockquarry.com:3039 -u pinwc4.1 -p x -t 1 -i 22 That was running on a 280X at about 1.4MH/s. It looks like you can adjust the intensity settings with the -i flag. Also with -t do not set it to 2 if you do not have that many GPU's, you will get bad shares (boooo) submitted like nonce had mentioned.
|
|
|
|
|
|
|
|
Even if you use Bitcoin through Tor, the way transactions are handled by the network makes anonymity difficult to achieve. Do not expect your transactions to be anonymous unless you really know what you're doing.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
nonce-pool
|
|
May 05, 2014, 09:37:13 PM |
|
Can you post sample batch file for GPU miner Fresh 64-bit Windows miners with stratum fixes: For GPU miner pass -t X option where X is a number of GPUs. GPU miner has to be executed from the directory where kernel directory is located. I do not have a batch file but a command like this should work: minerd-gpu.exe -o stratum+tcp://rlt.blockquarry.com:3039 -u pinwc4.1 -p x -t 1 -i 22 That was running on a 280X at about 1.4MH/s. It looks like you can adjust the intensity settings with the -i flag. Also with -t do not set it to 2 if you do not have that many GPU's, you will get bad shares (boooo) submitted like nonce had mentioned. I see now looks like -t for gpus is still number of threads, but still related to number of gpus my bad edit: this also fixes the duplicate shares for us for now, using -t 1 so that info may help with the fix edit2: ok that still only uses 1 gpu
|
|
|
|
Delivereath
|
|
May 05, 2014, 09:39:34 PM |
|
Can we hide all the thread & hashrate displayed and only keep found shares & blocks ?
|
|
|
|
gg234
|
|
May 05, 2014, 09:39:59 PM |
|
Thank you and i have 4 gpus with i 13 settings i am getting boos on 3 gpus Can you post sample batch file for GPU miner Fresh 64-bit Windows miners with stratum fixes: For GPU miner pass -t X option where X is a number of GPUs. GPU miner has to be executed from the directory where kernel directory is located. I do not have a batch file but a command like this should work: minerd-gpu.exe -o stratum+tcp://rlt.blockquarry.com:3039 -u pinwc4.1 -p x -t 1 -i 22 That was running on a 280X at about 1.4MH/s. It looks like you can adjust the intensity settings with the -i flag. Also with -t do not set it to 2 if you do not have that many GPU's, you will get bad shares (boooo) submitted like nonce had mentioned.
|
|
|
|
boost523
|
|
May 05, 2014, 09:40:34 PM |
|
how to play roulette then?
|
|
|
|
Drayg0
Newbie
Offline
Activity: 10
Merit: 0
|
|
May 05, 2014, 09:47:37 PM |
|
I'm loving the GPU miner. Now I can put that graphics card to work. I'm getting over 1400 khash/s out of my 280x. In case anyone is interested my command line is below.
minerd-gpu.exe -o stratum+tcp://rlt.blockquarry.com:3039 -u drayg0.280 -p x -q -i 22 -t 1
|
|
|
|
gg234
|
|
May 05, 2014, 09:49:19 PM |
|
My test results with GPU miner as follows and i have 4 gpu's If i use -t 1 - This is working fine If i use -t 4 - this is showing one thread yay and other 3 boo So there is something wrong with miner if i have more than 1 gpu Thank you and i have 4 gpus with i 13 settings i am getting boos on 3 gpus Can you post sample batch file for GPU miner Fresh 64-bit Windows miners with stratum fixes: For GPU miner pass -t X option where X is a number of GPUs. GPU miner has to be executed from the directory where kernel directory is located. I do not have a batch file but a command like this should work: minerd-gpu.exe -o stratum+tcp://rlt.blockquarry.com:3039 -u pinwc4.1 -p x -t 1 -i 22 That was running on a 280X at about 1.4MH/s. It looks like you can adjust the intensity settings with the -i flag. Also with -t do not set it to 2 if you do not have that many GPU's, you will get bad shares (boooo) submitted like nonce had mentioned.
|
|
|
|
nonce-pool
|
|
May 05, 2014, 09:51:48 PM |
|
My test results with GPU miner as follows and i have 4 gpu's If i use -t 1 - This is working fine If i use -t 4 - this is showing one thread yay and other 3 boo So there is something wrong with miner if i have more than 1 gpu Thank you and i have 4 gpus with i 13 settings i am getting boos on 3 gpus Can you post sample batch file for GPU miner Fresh 64-bit Windows miners with stratum fixes: For GPU miner pass -t X option where X is a number of GPUs. GPU miner has to be executed from the directory where kernel directory is located. I do not have a batch file but a command like this should work: minerd-gpu.exe -o stratum+tcp://rlt.blockquarry.com:3039 -u pinwc4.1 -p x -t 1 -i 22 That was running on a 280X at about 1.4MH/s. It looks like you can adjust the intensity settings with the -i flag. Also with -t do not set it to 2 if you do not have that many GPU's, you will get bad shares (boooo) submitted like nonce had mentioned. Yes we see the same, they plan on fixing this tomorrow. -t 1 will only use 1 gpu though, still great progress!
|
|
|
|
Delivereath
|
|
May 05, 2014, 09:56:58 PM |
|
I'm seeing the same, running the miner with -t 3 on a 3 gpu rig doesn't seem to correctly use the 3 gpu.
Can I run 3 instances of the miner with a single thread on each (dedicated to a single gpu) ?
|
|
|
|
nonce-pool
|
|
May 05, 2014, 09:58:58 PM |
|
I'm seeing the same, running the miner with -t 3 on a 3 gpu rig doesn't seem to correctly use the 3 gpu.
Can I run 3 instances of the miner with a single thread on each (dedicated to a single gpu) ?
We just confirmed this use -d for each device in a new shell
|
|
|
|
pttx
Newbie
Offline
Activity: 47
Merit: 0
|
|
May 05, 2014, 10:03:02 PM |
|
I'm seeing the same, running the miner with -t 3 on a 3 gpu rig doesn't seem to correctly use the 3 gpu.
Can I run 3 instances of the miner with a single thread on each (dedicated to a single gpu) ?
We just confirmed this use -d for each device in a new shell This is weird because -t 6 seem to be working perfectly for solo mining to wallet. [2014-05-05 22:52:21] accepted: 116/116 (100.00%), 13501 khash/s (yay!!!) [2014-05-05 22:58:53] accepted: 117/117 (100.00%), 13493 khash/s (yay!!!)
|
|
|
|
Delivereath
|
|
May 05, 2014, 10:06:48 PM |
|
Interesting. How many gpu do you have to reach 13.5 MH/s ?
|
|
|
|
pttx
Newbie
Offline
Activity: 47
Merit: 0
|
|
May 05, 2014, 10:09:46 PM |
|
Interesting. How many gpu do you have to reach 13.5 MH/s ?
-t 6 so 6 gpus?
|
|
|
|
nonce-pool
|
|
May 05, 2014, 10:13:18 PM |
|
I'm seeing the same, running the miner with -t 3 on a 3 gpu rig doesn't seem to correctly use the 3 gpu.
Can I run 3 instances of the miner with a single thread on each (dedicated to a single gpu) ?
We just confirmed this use -d for each device in a new shell This is weird because -t 6 seem to be working perfectly for solo mining to wallet. [2014-05-05 22:52:21] accepted: 116/116 (100.00%), 13501 khash/s (yay!!!) [2014-05-05 22:58:53] accepted: 117/117 (100.00%), 13493 khash/s (yay!!!) Solo hashing is slightly different than using a stratum pool.
|
|
|
|
Delivereath
|
|
May 05, 2014, 10:13:47 PM |
|
6x 280x or 6x 290x ?
|
|
|
|
pttx
Newbie
Offline
Activity: 47
Merit: 0
|
|
May 05, 2014, 10:18:43 PM |
|
6x 280x or 6x 290x ?
overclocked 290 (1125/1500)
|
|
|
|
Delivereath
|
|
May 06, 2014, 10:33:36 AM |
|
Dev, any plans for the coin ?
|
|
|
|
TorinT
|
|
May 06, 2014, 11:24:11 AM |
|
700 roulette coins for sell - .07 btc
|
|
|
|
|
goodluck0319
|
|
May 06, 2014, 02:05:34 PM |
|
WTS: 550 coin for .05 btc
|
|
|
|
|