HASHRA - LUNAR SERIES - ASIC SCRYPT MINERS

[iikun]

for me there are a  lot of unanswered questions.

1 -instruction for setup - where are they?
2 - does this thing come with a built in rasberry controller? - unanswered
3 - power plugs on back are 8 pins - do we plug our 6 pin gpu plug only or 6+2 when possible - unanswered
4 - can a static IP address be set - unanswered
5 - is this thing using controlla software - if so - where the link to the new software

many questions....

does anyone know these answers?

#2 is right there on their site

WHAT IS INCLUDED:
1 x LUNAR LANDER WARP 1
1 x SD CARD ready for Raspberry Pi with HASHRA CONTROLA firmware.
1 x USB DATA cable to use with Raspberry Pi
1 x Raspberry Pi Power cable for standard Power supply unit (4 PIN Connection)
1 x Raspberry Pi
1 x 24 Pin Power Switch connector to be used with your Standard Power Supply Unit.
1 x Ethernet cable for Raspberry Pi to your router.

for #3 I didn't really understand why Hashra said you need 2x 6pin because to my understanding 1x8 pin provides about the same amount of power.

The others I can't comment at all sorry

[jjj0923]

for me there are a  lot of unanswered questions.

1 -instruction for setup - where are they?
2 - does this thing come with a built in rasberry controller? - unanswered
3 - power plugs on back are 8 pins - do we plug our 6 pin gpu plug only or 6+2 when possible - unanswered
4 - can a static IP address be set - unanswered
5 - is this thing using controlla software - if so - where the link to the new software

many questions....

does anyone know these answers?

#2 is right there on their site

WHAT IS INCLUDED:
1 x LUNAR LANDER WARP 1
1 x SD CARD ready for Raspberry Pi with HASHRA CONTROLA firmware.
1 x USB DATA cable to use with Raspberry Pi
1 x Raspberry Pi Power cable for standard Power supply unit (4 PIN Connection)
1 x Raspberry Pi
1 x 24 Pin Power Switch connector to be used with your Standard Power Supply Unit.
1 x Ethernet cable for Raspberry Pi to your router.

for #3 I didn't really understand why Hashra said you need 2x 6pin because to my understanding 1x8 pin provides about the same amount of power.

The others I can't comment at all sorry

I don't like rasberry's - I wonder if I can run this thing without the rasberry - they're unreliable as far as I'm concerned and I did not like having to apply that boot patch they all required,

it took me about 1 week to deep six the rasberry on my gridseeds.

Now I just run my seeds and my blades from a rig with one Gpu card in it...

I downloaded the BAMT on a stick from ltcrabbit and then downloaded and compiled the gridseed version of cgminer and they run perfectly and never ever go offline. I love this setup.

[iikun]

I don't like rasberry's - I wonder if I can run this thing without the rasberry - they're unreliable as far as I'm concerned

I assume it would just be a case of opening it up & unplugging it? but yeah, no word on what the software is yet so can't be sure

[jjj0923]

I don't like rasberry's - I wonder if I can run this thing without the rasberry - they're unreliable as far as I'm concerned

I assume it would just be a case of opening it up & unplugging it? but yeah, no word on what the software is yet so can't be sure

it's possible they use cpuminer whihc I don't like because it has no api for monitoring and I use cgwatcher to monitor my 20 gridseeds and my 4 blades.

we shall see.

[mrcable]

how much noise does theese units give out ?

[jjj0923]

how much noise does theese units give out ?

no one knows yet because we're all waiting for our units to arrive :

[cxboyminer]

Who received?

[jjj0923]

Who received?

dude!!!


read the prior post: LOL

[cxboyminer]

Who received?

dude!!!


read the prior post: LOL

I know. Im wondering if someone ordered outside here received?

[jjj0923]

Who received?

dude!!!


read the prior post: LOL

I know. Im wondering if someone ordered outside here received?

LOL - if they did how would we know since they're not here.....  

we will be the first since we all pre-ordered and no one gets them before we do.

[chadwickx16]

Has anyone ordered from zighash.com? Or know if they are an authorized reseller?

[jjj0923]

Has anyone ordered from zighash.com? Or know if they are an authorized reseller?

I spoke to the owner yesterday - yes they are an authorized reseller and he'd be happy to send you a copy of the dealer letter from Hashra.

they're good guys and carry just about everything...

[HASHRA]

for me there are a  lot of unanswered questions.

1 -instruction for setup - where are they?
2 - does this thing come with a built in rasberry controller? - unanswered
3 - power plugs on back are 8 pins - do we plug our 6 pin gpu plug only or 6+2 when possible - unanswered
4 - can a static IP address be set - unanswered
5 - is this thing using controlla software - if so - where the link to the new software

many questions....

does anyone know these answers?

Well spotted Sir.

hashra.com/support/ will very soon have firmware and set up guide. : )
We will not sleep. : )

Everyone will have an SD card loaded with firmware anyway but we will make sure it is available to download also like we have done in the past.

The pins on the back are 8pin sockets but you need to use 6pin cables for it.
If you try to use a 6+2pin to make it an 8pin it will not work in the miner.

As long as you use a good quality PSU with separate cables for each 6pin that will be fine. Modular PSU is best of course.

[HASHRA]

for me there are a  lot of unanswered questions.

1 -instruction for setup - where are they?
2 - does this thing come with a built in rasberry controller? - unanswered
3 - power plugs on back are 8 pins - do we plug our 6 pin gpu plug only or 6+2 when possible - unanswered
4 - can a static IP address be set - unanswered
5 - is this thing using controlla software - if so - where the link to the new software

many questions....

does anyone know these answers?

#2 is right there on their site

WHAT IS INCLUDED:
1 x LUNAR LANDER WARP 1
1 x SD CARD ready for Raspberry Pi with HASHRA CONTROLA firmware.
1 x USB DATA cable to use with Raspberry Pi
1 x Raspberry Pi Power cable for standard Power supply unit (4 PIN Connection)
1 x Raspberry Pi
1 x 24 Pin Power Switch connector to be used with your Standard Power Supply Unit.
1 x Ethernet cable for Raspberry Pi to your router.

for #3 I didn't really understand why Hashra said you need 2x 6pin because to my understanding 1x8 pin provides about the same amount of power.

The others I can't comment at all sorry

I don't like rasberry's - I wonder if I can run this thing without the rasberry - they're unreliable as far as I'm concerned and I did not like having to apply that boot patch they all required,

it took me about 1 week to deep six the rasberry on my gridseeds.

Now I just run my seeds and my blades from a rig with one Gpu card in it...

I downloaded the BAMT on a stick from ltcrabbit and then downloaded and compiled the gridseed version of cgminer and they run perfectly and never ever go offline. I love this setup.

We will also have a copy of CGminer that will work with miners that you can use on a PC if you dan't want to use the Pi.

This will be available to download very shortly.

[jjj0923]

Simon - you are the Man!

thanks!

[HASHRA]

Has anyone ordered from zighash.com? Or know if they are an authorized reseller?

I spoke to the owner yesterday - yes they are an authorized reseller and he'd be happy to send you a copy of the dealer letter from Hashra.

they're good guys and carry just about everything...

Zighash are official.

We understand that some people prefer to deal with a local company so we are taking on a couple of resellers in the States and Europe.

[chadwickx16]

Has anyone ordered from zighash.com? Or know if they are an authorized reseller?

I spoke to the owner yesterday - yes they are an authorized reseller and he'd be happy to send you a copy of the dealer letter from Hashra.

they're good guys and carry just about everything...

Zighash are official.

We understand that some people prefer to deal with a local company so we are taking on a couple of resellers in the States and Europe.

Thanks for Vouching HASHRA!

[r0ach]

edit - problem with Hashra solved by Simon

[crocko]

@HASHRA

When the delivery for batch#1 will actually begin ?
The difficulty for LTC is already 9,116.3841 and continue to climbing !
We must have at least a chance of ROI before the Titan will hit the market !!

[anarchoatheist]

Order #870  Awaiting Fulfillment