socal
|
|
June 15, 2014, 05:54:58 PM |
|
I finally unlocked my wallet but it is encrypted. and is stays Staking and I can see interest coming in. However I see Generated But Not Accepted Interest How do I fix that as I am seeing more question marks it means someone else hit the same block at the same time do not worry next interest you get will be doubled
|
|
|
|
Shinraven
|
|
June 15, 2014, 06:25:43 PM |
|
I finally unlocked my wallet but it is encrypted. and is stays Staking and I can see interest coming in. However I see Generated But Not Accepted Interest How do I fix that as I am seeing more question marks it means someone else hit the same block at the same time do not worry next interest you get will be doubled All the interest I saw incoming so far all have a ? saying the same. The previous one said " Status: conflicted Date: 6/12/14 15:22 Source: Generated I am not sure they will clear or how the get them back
|
|
|
|
socal
|
|
June 15, 2014, 07:49:12 PM |
|
try closing your wallet then opening the properties of the wallet-qt shortcut and add -salvagewallet behind the name (NOT as a part of the name) and reopen your wallet it SHOULD fix it
***NOTE***
Make a BACKUP of your wallet.dat file and save it to a different location before you try salvaging your wallet
|
|
|
|
Shinraven
|
|
June 15, 2014, 08:22:19 PM |
|
try closing your wallet then opening the properties of the wallet-qt shortcut and add -salvagewallet behind the name (NOT as a part of the name) and reopen your wallet it SHOULD fix it
***NOTE***
Make a BACKUP of your wallet.dat file and save it to a different location before you try salvaging your wallet
I am on a mac I only see a macos folder in contents with a batch file for terminal I tried to execute the command salvagewallet there but i dont any changes
|
|
|
|
kleineaap
|
|
June 15, 2014, 09:04:56 PM |
|
try closing your wallet then opening the properties of the wallet-qt shortcut and add -salvagewallet behind the name (NOT as a part of the name) and reopen your wallet it SHOULD fix it
***NOTE***
Make a BACKUP of your wallet.dat file and save it to a different location before you try salvaging your wallet
I am on a mac I only see a macos folder in contents with a batch file for terminal I tried to execute the command salvagewallet there but i dont any changes first backup cp -r ~/Library/Application\ Support/VeriCoin ~/Library/Application\ Support/VeriCoin.BACKUP then run with salvage /Applications/VeriCoin-Qt.app/Contents/MacOS/VeriCoin-Qt -salvagewallet
|
|
|
|
souljah1h
Legendary
Offline
Activity: 1092
Merit: 1000
Hyperspace snail
|
|
June 15, 2014, 09:07:15 PM |
|
I recieved the coin i sent to my second VRC address, interesting detail: Status: 100 confirmations Date: 6/15/2014 21:26 From: unknownTo: VRhRfhLe7u7ucvrG931SKoH8r3D4E2dvYT (own address, label: Anon) Credit: 1.00 VRC Net amount: +1.00 VRC Transaction ID: 404bbde65eb992a615436c08d1f73fa5242fd3fa7aaa1b3abf2e85ebdcf0f007
|
_@/'
|
|
|
bit-coin.pt
Full Member
Offline
Activity: 154
Merit: 100
bit-coin.pt - A divulgar a Bitcoin em Portugal
|
|
June 15, 2014, 09:13:31 PM |
|
I recieved the coin i sent to my second VRC address, interesting detail: Status: 100 confirmations Date: 6/15/2014 21:26 From: unknownTo: VRhRfhLe7u7ucvrG931SKoH8r3D4E2dvYT (own address, label: Anon) Credit: 1.00 VRC Net amount: +1.00 VRC Transaction ID: 404bbde65eb992a615436c08d1f73fa5242fd3fa7aaa1b3abf2e85ebdcf0f007 This could mean that VeriSend is live?
|
Bit-Coin.pt - A divulgar a Bitcoin em Portugal - Ajuda o projecto com donativos para 18brXUnsJEXmmEwuwdf7QfkfwQY341492f
|
|
|
souljah1h
Legendary
Offline
Activity: 1092
Merit: 1000
Hyperspace snail
|
|
June 15, 2014, 09:15:20 PM |
|
I recieved the coin i sent to my second VRC address, interesting detail: Status: 100 confirmations Date: 6/15/2014 21:26 From: unknownTo: VRhRfhLe7u7ucvrG931SKoH8r3D4E2dvYT (own address, label: Anon) Credit: 1.00 VRC Net amount: +1.00 VRC Transaction ID: 404bbde65eb992a615436c08d1f73fa5242fd3fa7aaa1b3abf2e85ebdcf0f007 This could mean that VeriSend is live? If you donated its live Recieved the 25 VRC on mintpal also. http://chainz.cryptoid.info/vrc/tx.dws?b57f36f492db134a53f09736d802836ca5ca4658f0e2774c5adcba514d27d1cf.htm
|
_@/'
|
|
|
ScottAllyn
Full Member
Offline
Activity: 236
Merit: 100
¿ʇɐɥʍ
|
|
June 15, 2014, 09:17:51 PM |
|
From: unknown I get that for every single receive transaction in my wallet, so I don't think that's VeriSend related. What does it show on the blockchain explorer?
|
|
|
|
|
Shinraven
|
|
June 15, 2014, 09:23:32 PM |
|
try closing your wallet then opening the properties of the wallet-qt shortcut and add -salvagewallet behind the name (NOT as a part of the name) and reopen your wallet it SHOULD fix it
***NOTE***
Make a BACKUP of your wallet.dat file and save it to a different location before you try salvaging your wallet
I am on a mac I only see a macos folder in contents with a batch file for terminal I tried to execute the command salvagewallet there but i dont any changes first backup cp -r ~/Library/Application\ Support/VeriCoin ~/Library/Application\ Support/VeriCoin.BACKUP then run with salvage /Applications/VeriCoin-Qt.app/Contents/MacOS/VeriCoin-Qt -salvagewallet I backed up the data, then I tried that, it started to load then now im getting a cannot initialize keypool error when the wallet app is launching & the wallet will no longer run
|
|
|
|
bit-coin.pt
Full Member
Offline
Activity: 154
Merit: 100
bit-coin.pt - A divulgar a Bitcoin em Portugal
|
|
June 15, 2014, 10:02:06 PM |
|
The webmaster should fix this. When someone share the vericoin.info website in facebook the Apple icons pop's up... it's not very important but this is not good
|
Bit-Coin.pt - A divulgar a Bitcoin em Portugal - Ajuda o projecto com donativos para 18brXUnsJEXmmEwuwdf7QfkfwQY341492f
|
|
|
FappyMakeMeHappy
Newbie
Offline
Activity: 4
Merit: 0
|
|
June 15, 2014, 10:09:31 PM |
|
I have "Spendable" Vericoin shown in my wallet, but am unsure of how to make my coins begin to "stake". They have been in my wallet for about 24 hours. Do I need to do something in order to allow the coins for staking? I show 14 active connections to the Vericoin network and when I hover my mouse over the logo in the bottom right corner of wallet I am told:
Staking. Network interest rate is: 2.13923% Network stake is: ******* Expected time to earn interest is: 8 hours
Are my coins currently considered "staked"? I show zero in "Stake:" in the top left corner of the wallet. and show all my coins in the "Spendable:...."
Also in order for coins to be staked must they be left on the open wallet on a computer harddrive or will they stake when left in cold storage as well (from what I understand they do not)? I'm new to the whole staking technology and am just trying to get a grasp & fully understand. I have read the entire forum here as well as other places, but was unable to answer my questions so I figured I'd resort to asking.
Also once coins are "staked" how long does it take for them to become "spendable" again. I'm failing to grasp what "staking" actually does for the coin. Is it setting our coins aside to be used by the system in some way?
I would really appreciate someone to explain a little in detail "staking" to a newb. I appreciate any and all answers or help I may receive ahead of time!
|
|
|
|
|
kleineaap
|
|
June 15, 2014, 11:14:14 PM |
|
I have "Spendable" Vericoin shown in my wallet, but am unsure of how to make my coins begin to "stake". They have been in my wallet for about 24 hours. Do I need to do something in order to allow the coins for staking? I show 14 active connections to the Vericoin network and when I hover my mouse over the logo in the bottom right corner of wallet I am told:
Staking. Network interest rate is: 2.13923% Network stake is: ******* Expected time to earn interest is: 8 hours
Are my coins currently considered "staked"? I show zero in "Stake:" in the top left corner of the wallet. and show all my coins in the "Spendable:...."
Also in order for coins to be staked must they be left on the open wallet on a computer harddrive or will they stake when left in cold storage as well (from what I understand they do not)? I'm new to the whole staking technology and am just trying to get a grasp & fully understand. I have read the entire forum here as well as other places, but was unable to answer my questions so I figured I'd resort to asking.
Also once coins are "staked" how long does it take for them to become "spendable" again. I'm failing to grasp what "staking" actually does for the coin. Is it setting our coins aside to be used by the system in some way?
I would really appreciate someone to explain a little in detail "staking" to a newb. I appreciate any and all answers or help I may receive ahead of time!
Staking gets you a percentage of interest that is variable depending of what you hold. You need to have the coins in your running wallet for half a day or so before they begin to generate interest. The wallet must be up and running. The more coins you hold, more is to stake, therefore bigger the interest. Payouts occur once in a while, few times a day - keep in mind what you stake dictates interest payouts - and you can check the estimate hovering over the right bottom blue VRC logo in the wallet. You won't be able to access your coins at stake. They are hold in the wallet as unspendable, because obviously you can't generate interest with them and sell them at the same time. Think of it as a savings account. If you touch it you'll lose its yearly interest. Difference here is that you can't touch it, until interest clears. It clears out pretty quick though. Hope this is helpful.
|
|
|
|
Shinraven
|
|
June 15, 2014, 11:45:14 PM |
|
try closing your wallet then opening the properties of the wallet-qt shortcut and add -salvagewallet behind the name (NOT as a part of the name) and reopen your wallet it SHOULD fix it
***NOTE***
Make a BACKUP of your wallet.dat file and save it to a different location before you try salvaging your wallet
I am on a mac I only see a macos folder in contents with a batch file for terminal I tried to execute the command salvagewallet there but i dont any changes first backup cp -r ~/Library/Application\ Support/VeriCoin ~/Library/Application\ Support/VeriCoin.BACKUP then run with salvage /Applications/VeriCoin-Qt.app/Contents/MacOS/VeriCoin-Qt -salvagewallet I backed up the data, then I tried that, it started to load then now im getting a cannot initialize keypool error when the wallet app is launching & the wallet will no longer run I have the dat file, do you guys know how to restore this wallet ? I am on a mac. thanks
|
|
|
|
kleineaap
|
|
June 15, 2014, 11:57:45 PM |
|
try closing your wallet then opening the properties of the wallet-qt shortcut and add -salvagewallet behind the name (NOT as a part of the name) and reopen your wallet it SHOULD fix it
***NOTE***
Make a BACKUP of your wallet.dat file and save it to a different location before you try salvaging your wallet
I am on a mac I only see a macos folder in contents with a batch file for terminal I tried to execute the command salvagewallet there but i dont any changes first backup cp -r ~/Library/Application\ Support/VeriCoin ~/Library/Application\ Support/VeriCoin.BACKUP then run with salvage /Applications/VeriCoin-Qt.app/Contents/MacOS/VeriCoin-Qt -salvagewallet I backed up the data, then I tried that, it started to load then now im getting a cannot initialize keypool error when the wallet app is launching & the wallet will no longer run I have the dat file, do you guys know how to restore this wallet ? I am on a mac. thanks uninstall wallet, replace original wallet.dat with back up, open new wallet with -rescan and let it sync.
|
|
|
|
Shinraven
|
|
June 16, 2014, 12:39:30 AM |
|
try closing your wallet then opening the properties of the wallet-qt shortcut and add -salvagewallet behind the name (NOT as a part of the name) and reopen your wallet it SHOULD fix it
***NOTE***
Make a BACKUP of your wallet.dat file and save it to a different location before you try salvaging your wallet
I am on a mac I only see a macos folder in contents with a batch file for terminal I tried to execute the command salvagewallet there but i dont any changes first backup cp -r ~/Library/Application\ Support/VeriCoin ~/Library/Application\ Support/VeriCoin.BACKUP then run with salvage /Applications/VeriCoin-Qt.app/Contents/MacOS/VeriCoin-Qt -salvagewallet I backed up the data, then I tried that, it started to load then now im getting a cannot initialize keypool error when the wallet app is launching & the wallet will no longer run I have the dat file, do you guys know how to restore this wallet ? I am on a mac. thanks uninstall wallet, replace original wallet.dat with back up, open new wallet with -rescan and let it sync. Thanks, I give up on trying to get this interest to work as I almost lost this whole wallet yikes ! wallet now loaded.
|
|
|
|
|
bit-coin.pt
Full Member
Offline
Activity: 154
Merit: 100
bit-coin.pt - A divulgar a Bitcoin em Portugal
|
|
June 16, 2014, 01:03:02 AM |
|
|
Bit-Coin.pt - A divulgar a Bitcoin em Portugal - Ajuda o projecto com donativos para 18brXUnsJEXmmEwuwdf7QfkfwQY341492f
|
|
|
|