ryanyulinruan
Member
Offline
Activity: 69
Merit: 10
Just another Canadian Cryptocurrency enthusiast!
|
|
January 28, 2018, 02:41:55 AM |
|
All preorders have been shipped. If you haven't received an email notification, please let me know.
Additionally, I will be listing a few in stock units tonight at 10PM CST. Max 2 per buyer(4 unit max if you buy a D3)
Hello! Glad to hear they were shipped! I didn't receive an email notification yet. I bought two units They are order 100001056 and order 100000911. The website still says "Processing" under status, but I paid both orders in early December using the coinpayments system, in which I paid using Dogecoin. Can you please check the status of my orders please? I can't wait to get my miners! You're awesome!
|
Donate BTC here: 1MW9aJeXcVygR93zGrCrBAqaAZLoVSd9z
|
|
|
CrazyGuy (OP)
Legendary
Offline
Activity: 1973
Merit: 1007
|
|
January 28, 2018, 03:54:42 AM |
|
In Stock units have been posted.
|
ASICPuppy.net ASIC Mining Hardware and Accessories - Compac F in stock!
|
|
|
chemistua
Newbie
Offline
Activity: 9
Merit: 0
|
|
January 28, 2018, 04:22:19 AM |
|
Have ordered two units once they became available (was hitting F5 like crazy). Paid for the order and waiting for confirmations... Hope everything went OK and I will get the miners
|
|
|
|
chemistua
Newbie
Offline
Activity: 9
Merit: 0
|
|
January 28, 2018, 04:49:54 AM |
|
It's been almost an hour since I paid. Still waiting for at least 1 conformation to have peace of mind and sleep well.
@CrazyGuy, could you please look into this payment ID CPCA3DI7KMGMCZIJGWNONFOCUX
|
|
|
|
crypto_curious
|
|
February 04, 2018, 10:50:21 AM |
|
Yesterday I received my 3 units from Asicpuppy.net. Well packaged and secured. I assembled heatsinks and fan. Now, they hashing away nicely in my PC, with 756 clock. bfgminer version 5.4.2-38-g106390a99 - Started: [2018-02-04 09:13:17] - [ 0 days 01:21:14] [M]anage devices [P]ool management [S]ettings [D]isplay options [H]elp [Q]uit Pool 0: litecoinpool.org Diff:3m +Strtm LU:[10:34:28] User:x Block: ...bca9ddd1dbdfeb87 Diff:4.16M (29.78Th) Started: [10:33:39] I: 2.02uBTC/hr ST:5 F:0 NB:31 AS:0 BW:[ 86/ 93 B/s] E:0.03 BS:7 3 | 13.11/12.62/12.53Mh/s | A:3712 R:5+0(.13%) HW:151/.52% ------------------------------------------------------------------------------------------------------------------------ MLD 0: | 4.79/ 4.32/ 4.29Mh/s | A:1233 R:1+0(.08%) HW: 42/.42% MLD 1: | 4.51/ 4.28/ 4.30Mh/s | A:1294 R:2+0(.15%) HW: 53/.54% MLD 2: | 4.16/ 4.31/ 4.21Mh/s | A:1192 R:2+0(.17%) HW: 59/.62% ------------------------------------------------------------------------------------------------------------------------ [2018-02-04 10:34:00] Accepted 00b37774 MLD 2 Diff 5m/3m [2018-02-04 10:34:01] Accepted 00f86f41 MLD 1 Diff 4m/3m [2018-02-04 10:34:03] Accepted 00621284 MLD 2 Diff 10m/3m [2018-02-04 10:34:04] Accepted 009bd2f1 MLD 0 Diff 6m/3m [2018-02-04 10:34:05] Accepted 00ffb60f MLD 2 Diff 3m/3m [2018-02-04 10:34:07] Accepted 00a8c9ee MLD 2 Diff 5m/3m [2018-02-04 10:34:08] Accepted 00472747 MLD 1 Diff 14m/3m [2018-02-04 10:34:13] Accepted 008f1d2b MLD 0 Diff 6m/3m [2018-02-04 10:34:14] Accepted 0077a310 MLD 0 Diff 8m/3m [2018-02-04 10:34:16] Accepted 00b0587d MLD 0 Diff 5m/3m [2018-02-04 10:34:16] Accepted 0006c15c MLD 1 Diff 148m/3m [2018-02-04 10:34:17] Accepted 00863c65 MLD 2 Diff 7m/3m [2018-02-04 10:34:25] Accepted 000d1351 MLD 0 Diff 76m/3m [2018-02-04 10:34:25] Accepted 009c2d8b MLD 0 Diff 6m/3m [2018-02-04 10:34:25] Accepted 000b2f45 MLD 0 Diff 89m/3m [2018-02-04 10:34:25] Accepted 0045e70d MLD 1 Diff 14m/3m [2018-02-04 10:34:25] Accepted 00293984 MLD 0 Diff 24m/3m [2018-02-04 10:34:26] Accepted 008e9277 MLD 1 Diff 7m/3m [2018-02-04 10:34:28] Accepted 00345faf MLD 1 Diff 19m/3m I left feedback on your profile. Thanks!
|
|
|
|
monkeyrocker
Newbie
Offline
Activity: 6
Merit: 0
|
|
February 25, 2018, 12:21:22 PM Last edit: February 27, 2018, 08:59:44 AM by monkeyrocker |
|
Hello, I've ordered my units back in december, the pre-order for 2 future moonlanders 2 from asicpuppy.com I did receive a notification "shipping label created" from USPS but no updates after that and USPS shows its still pending/waiting for the items. So far no reply through the contact form of asicpuppy and their support email address they list ( support@asicpuppy.com) get returned immediately as non-existing. Anything @crazyguy can look into? Thanks in advance, MR [EDIT: They were able to get in contact, USPS probably screwed up, should hopefully be sorted now, will update when it arrives]
|
|
|
|
crypto_curious
|
|
March 06, 2018, 05:12:05 PM |
|
Crazyguy, I send some requests via web form, are you able to reply? It's about two of my orders I made on your website. Please check. Thanks
|
|
|
|
CrazyGuy (OP)
Legendary
Offline
Activity: 1973
Merit: 1007
|
|
March 07, 2018, 04:16:01 AM |
|
|
ASICPuppy.net ASIC Mining Hardware and Accessories - Compac F in stock!
|
|
|
CrazyGuy (OP)
Legendary
Offline
Activity: 1973
Merit: 1007
|
|
March 07, 2018, 08:03:26 AM |
|
Offering Terminus with custom minera image and rpi with latest vthoang build. Select the corresponding add-on via the order page.
|
ASICPuppy.net ASIC Mining Hardware and Accessories - Compac F in stock!
|
|
|
crypto_curious
|
|
March 13, 2018, 06:25:07 AM |
|
CrazyGuy, 21 of February I ordered Moonlander. Order no #100001492 Since then, it's been travelling between US and France, It's already been in Paris twice. I don't know what is wrong with the address or the way package as been made, but you are only one who can contact USPS, as you have shipper details, I tried. https://screenshots.firefox.com/gj2id4zw7jiOLg8C/tools.usps.comPlease contact USPS and sort this out please.
|
|
|
|
CrazyGuy (OP)
Legendary
Offline
Activity: 1973
Merit: 1007
|
|
March 19, 2018, 04:45:55 AM |
|
I have a few Terminus units left in stock, as well as Futurebit moonlander 2's and 2pacs. All prices have been lowered to accommodate the falling exchange rate and I have upped the purchase limit on FBM and 2pac to 4 per buyer.
|
ASICPuppy.net ASIC Mining Hardware and Accessories - Compac F in stock!
|
|
|
CrazyGuy (OP)
Legendary
Offline
Activity: 1973
Merit: 1007
|
|
March 27, 2018, 06:34:25 PM |
|
Due to popular demand, I've added paypal payments back on the site.
|
ASICPuppy.net ASIC Mining Hardware and Accessories - Compac F in stock!
|
|
|
eljaydub
Newbie
Offline
Activity: 3
Merit: 0
|
|
April 25, 2018, 04:42:29 PM |
|
Just sent you an email - I ordered a Moonlander 2 on March 7 and still have not received it.
|
|
|
|
eljaydub
Newbie
Offline
Activity: 3
Merit: 0
|
|
May 17, 2018, 05:57:19 PM |
|
Just got my replacement Moonlander 2 in the mail - thank you very much!
|
|
|
|
maxfunky
|
|
November 23, 2018, 08:07:54 AM |
|
R1 Custom Firmware available!As promised, I am releasing my customized firmware to the community. Please note that although I refer to this package as custom firmware, it is really just a patch file. If you reset your R1 to factory defaults, you will lose the customizations. In which case, you would just need to re-apply the patch. Changelog for release 0.95:- Opened up port 4029 for API access to cgminer-u3 instance - Max frequency for U3 increased to 250M - Max fequency for R1 increased to 250M (I have not personally tested freq past 125. Use at your own risk!) Firmware Enhancements- U3 zombie handling(Scripted auto-cgminer restarts and R1 reboot if necessary) - Supports modifying R1 pools from UI, without losing the ability to use Bitmain's solo pool for R1. - Detailed R1 stats page, including pool statistics - Supports modifying R1 freq and voltage from UI - U3 freq selection increased to 250M - Cgminer-U3 API open for monitoring with 3rd party tools WARNING: These customizations provide the ability to push your R1 beyond its intended limits. Because of this, it will likely void your warranty with Bitmain. Additionally, I provide this patch with no official support, and take no responsibility for any damage done to your R1 device or its surroundings. Use at your own risk! By downloading and applying this patch, the user is accepting these conditions. Download BelowR1CGCustomFW_0.95_2015-12-28.tar.gzUpgrade instructionsTo upgrade your firmware, go to "Backup / Flash Firmware" under the "System" tab - Click on the "Chose File" button to the right of "Restore Backup:" (NOTE: Do not mistake this with the "Chose File" button under Flash new firmware. - This is not a full binary firmware file) - Choose "R1CGCustomFW_0.95_2015-12-28.tar.gz" from your PC and then click on the "Upload archive" button. Your antrouter system will reboot and come back up with updated firmware! Great work, is there a similar firmware for the R1-LTC ?
|
|
|
|
CrazyGuy (OP)
Legendary
Offline
Activity: 1973
Merit: 1007
|
|
November 23, 2018, 03:15:11 PM |
|
R1 Custom Firmware available!As promised, I am releasing my customized firmware to the community. Please note that although I refer to this package as custom firmware, it is really just a patch file. If you reset your R1 to factory defaults, you will lose the customizations. In which case, you would just need to re-apply the patch. Changelog for release 0.95:- Opened up port 4029 for API access to cgminer-u3 instance - Max frequency for U3 increased to 250M - Max fequency for R1 increased to 250M (I have not personally tested freq past 125. Use at your own risk!) Firmware Enhancements- U3 zombie handling(Scripted auto-cgminer restarts and R1 reboot if necessary) - Supports modifying R1 pools from UI, without losing the ability to use Bitmain's solo pool for R1. - Detailed R1 stats page, including pool statistics - Supports modifying R1 freq and voltage from UI - U3 freq selection increased to 250M - Cgminer-U3 API open for monitoring with 3rd party tools WARNING: These customizations provide the ability to push your R1 beyond its intended limits. Because of this, it will likely void your warranty with Bitmain. Additionally, I provide this patch with no official support, and take no responsibility for any damage done to your R1 device or its surroundings. Use at your own risk! By downloading and applying this patch, the user is accepting these conditions. Download BelowR1CGCustomFW_0.95_2015-12-28.tar.gzUpgrade instructionsTo upgrade your firmware, go to "Backup / Flash Firmware" under the "System" tab - Click on the "Chose File" button to the right of "Restore Backup:" (NOTE: Do not mistake this with the "Chose File" button under Flash new firmware. - This is not a full binary firmware file) - Choose "R1CGCustomFW_0.95_2015-12-28.tar.gz" from your PC and then click on the "Upload archive" button. Your antrouter system will reboot and come back up with updated firmware! Great work, is there a similar firmware for the R1-LTC ? I haven't fired up an R1-LTC in a while, but if I recall correctly, they now allow you to setup pool information. Didn't see any need for modifying the firmware.
|
ASICPuppy.net ASIC Mining Hardware and Accessories - Compac F in stock!
|
|
|
CrazyGuy (OP)
Legendary
Offline
Activity: 1973
Merit: 1007
|
|
November 23, 2018, 03:15:53 PM |
|
Black Friday sale today @ ASICPUPPY.COM. Use Promo Code: "BLACKFRIDAY" for 15% off your order.
I've got Newpac and FB Moonlander 2 units in stock!
|
ASICPuppy.net ASIC Mining Hardware and Accessories - Compac F in stock!
|
|
|
bencehavran
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 12, 2019, 03:49:00 PM |
|
Hey, i have bought a used Antrouter R1-BTC, but i have tried with 3 different pool, it does not start to mine.... Stucked on 0 Gh/s https://i.imgur.com/ZtFIrDS.pngI have made an update also, nothing changed.... does anybody know why? Thanks
|
|
|
|
Dreamrace
Newbie
Offline
Activity: 15
Merit: 5
|
|
August 12, 2020, 07:32:03 PM |
|
Hi,
Are you still trading? I have an order in the system pending.
Invoice #100001729.
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3836
Merit: 2580
|
|
January 09, 2021, 03:30:22 PM |
|
R1 Custom Firmware available!As promised, I am releasing my customized firmware to the community. Please note that although I refer to this package as custom firmware, it is really just a patch file. If you reset your R1 to factory defaults, you will lose the customizations. In which case, you would just need to re-apply the patch. Changelog for release 0.95:- Opened up port 4029 for API access to cgminer-u3 instance - Max frequency for U3 increased to 250M - Max fequency for R1 increased to 250M (I have not personally tested freq past 125. Use at your own risk!) Firmware Enhancements- U3 zombie handling(Scripted auto-cgminer restarts and R1 reboot if necessary) - Supports modifying R1 pools from UI, without losing the ability to use Bitmain's solo pool for R1. - Detailed R1 stats page, including pool statistics - Supports modifying R1 freq and voltage from UI - U3 freq selection increased to 250M - Cgminer-U3 API open for monitoring with 3rd party tools WARNING: These customizations provide the ability to push your R1 beyond its intended limits. Because of this, it will likely void your warranty with Bitmain. Additionally, I provide this patch with no official support, and take no responsibility for any damage done to your R1 device or its surroundings. Use at your own risk! By downloading and applying this patch, the user is accepting these conditions. Download BelowR1CGCustomFW_0.95_2015-12-28.tar.gzUpgrade instructionsTo upgrade your firmware, go to "Backup / Flash Firmware" under the "System" tab - Click on the "Chose File" button to the right of "Restore Backup:" (NOTE: Do not mistake this with the "Chose File" button under Flash new firmware. - This is not a full binary firmware file) - Choose "R1CGCustomFW_0.95_2015-12-28.tar.gz" from your PC and then click on the "Upload archive" button. Your antrouter system will reboot and come back up with updated firmware! At your Firmware i also can modified the diff manually or i can fix the diff at a sha256 Altcoin pool?
|
|
|
|
|