ASICPuppy.net - Newpac, Terminus, Moonlander 2, 2pacs in Stock! BTC,LTC,ETH,BCH

[CrazyGuy]

[philipma1957]

I am ordering 2 of these will review them with custom rpi see pm.

[CrazyGuy]

I've tested at 320 and 350 freq in a very hot room and both frequencies are giving me around 110-124gh/s average over the past 10 minutes. 55 decibels measured from 3 feet away. I've been unable to find an official windows build of Rockminer's custom cgminer, but the code is present in the rpi image. I may pull it down and do my own windows build tonight if I have time.

[ManeBjorn]

That is great news!
Thanks again for the work on the software to run them. 

I've tested at 320 and 350 freq in a very hot room and both frequencies are giving me around 110-124gh/s average over the past 10 minutes. 55 decibels measured from 3 feet away. I've been unable to find an official windows build of Rockminer's custom cgminer, but the code is present in the rpi image. I may pull it down and do my own windows build tonight if I have time.

[CrazyGuy]

I've copied the code from Rockminer's RPi image and built for Windows. With a bronze rated PSU and only 1 unit, I am using 133 watts at 320 clock(120gh/s) and 143 watts at 350(129gh/s). I'm sure a more efficient PSU and multiple units would significantly lower avg power usage and I'm going to let Mr. Philip confirm. Also, I haven't tried lowering the clock freq yet.


320


350

[philipma1957]

I will run the 2  on a gold evga 1300  and on a  pair of plats seasonic , antec

[mstrongbow]

Here we go! First 10 units shipping tomorrow!

These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct.

Enjoy...

[mstrongbow]

Thanks for posting the pic bro, looks good! Runs fairly cool I'd imagine yeah?

[CrazyGuy]

Here we go! First 10 units shipping tomorrow!

These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct.

Enjoy...

Looks awesome, great work!

[mstrongbow]

Thanks man, the basic model was fairly straight forward but getting it just right was a sweet challenge. I am still chasing a bug in the model but they still print well. Sometimes 3d modeling can really drive me crazy, heh.
I will be snapping some last minute pics of the lot this evening when packing them for tomorrows shipment.

[ManeBjorn]

Great work as always.
The look nice!

Here we go! First 10 units shipping tomorrow!

These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct.

Enjoy...

[mstrongbow]

Great work as always.
The look nice!

Here we go! First 10 units shipping tomorrow!

These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct.

Enjoy...

Thanks bro! I really enjoy designing and printing this type of stuff.

Packing these up now!

[CanaryInTheMine]

Great work as always.
The look nice!

Here we go! First 10 units shipping tomorrow!

These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct.

Enjoy...

Thanks bro! I really enjoy designing and printing this type of stuff.

Packing these up now!

Maybe you can create a case that holds the Pi and the USB hub (that's shipped with rockminer) as 1 unit...

[mstrongbow]

Great work as always.
The look nice!

Here we go! First 10 units shipping tomorrow!

These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct.

Enjoy...

Thanks bro! I really enjoy designing and printing this type of stuff.

Packing these up now!

Maybe you can create a case that holds the Pi and the USB hub (that's shipped with rockminer) as 1 unit...

Dude! That is an excellent idea! Are all the Rockminer USB hubs the same ? I have one here with my RK-Box...I can get started on the design and get a couple your way pretty soon. 

[CrazyGuy]

Great work as always.
The look nice!

Here we go! First 10 units shipping tomorrow!

These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct.

Enjoy...

Thanks bro! I really enjoy designing and printing this type of stuff.



Packing these up now!

Maybe you can create a case that holds the Pi and the USB hub (that's shipped with rockminer) as 1 unit...

Dude! That is an excellent idea! Are all the Rockminer USB hubs the same ? I have one here with my RK-Box...I can get started on the design and get a couple your way pretty soon. 

You could hit the trifecta with the pi, usb hub, and Rockminer's PSU breakout board in one case. The usb hub is the same as the one that comes with the RK-Box, and the breakout board is similar to Blackarrow's. I'll get one out to you if you want to give it a shot.

[mstrongbow]

Great work as always.
The look nice!

Here we go! First 10 units shipping tomorrow!

These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct.

Enjoy...

Thanks bro! I really enjoy designing and printing this type of stuff.



Packing these up now!

Maybe you can create a case that holds the Pi and the USB hub (that's shipped with rockminer) as 1 unit...

Dude! That is an excellent idea! Are all the Rockminer USB hubs the same ? I have one here with my RK-Box...I can get started on the design and get a couple your way pretty soon. 

You could hit the trifecta with the pi, usb hub, and Rockminer's PSU breakout board in one case. The usb hub is the same as the one that comes with the RK-Box, and the breakout board is similar to Blackarrow's. I'll get one out to you if you want to give it a shot.

Heck yeah bro, that would be awesome!
I saw their new breakout board and immediately had a couple ideas but none near as good as what you guys have suggested.

[CanaryInTheMine]

Just keep in mind that Rovkminer Pis should have little heatsinks on their chips.  Maybe case design should take this into account, incase spacing is effected.

[CrazyGuy]

Just keep in mind that Rovkminer Pis should have little heatsinks on their chips.  Maybe case design should take this into account, incase spacing is effected.

Can you post a pic? I don't think I got the beefed up RPis in this shipment. Fortunately, I haven't had any issues with reboots with the current gen Pis.

[philipma1957]

Just got the r-box note not r-boxes the rPi the breakout board.  all in a medium box.

So I am short 1 r-box and I paid 33 in postage for a medium flat rate.

I ship a lot and I know mistakes get made. So I figure I need a refund of 109.95 .

 

EDIT

Now I just went to post office website.  
It looks like you sent 2 boxes 1 is lost.

At lease the one that came has the rasp pi in it.

I am going to make an effort to set this up tonight.

Get some flat rate regional a, b, c boxes  Even though the  regional c box costs   more then it should .  It would be just one box my zip is 07731 your  zip is 75035

I would have paid you the 37 over the 33 to have it in one box.  I just did this with canary when I got a tube from him I asked for 1 c and I paid 37  to have the one box.

you most likely used a pair of mediums  that was around 30 bucks. Please contact your post office about the missing box.  I will contact my post office.  I find it helps missing shit get found.

[CrazyGuy]

Just got the r-box note not r-boxes the rPi the breakout board.  all in a medium box.

So I am short 1 r-box and I paid 33 in postage for a medium flat rate.

I ship a lot and I know mistakes get made. So I figure I need a refund of 109.95 .

 

EDIT

Now I just went to post office website.  
It looks like you sent 2 boxes 1 is lost.

At lease the one that came has the rasp pi in it.

I am going to make an effort to set this up tonight.

Get some flat rate regional a, b, c boxes  Even though the  regional c box costs   more then it should .  It would be just one box my zip is 07731 your  zip is 75035

Yeh, I shipped in separate packages. Every once in a while USPS will split package buddies up and deliver on separate days.