[ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer)

[goodluck0319]

does 50 MH/s = 50000 kh/s or 5000 kh/s?

[1714544339]

1714544339

[1714544339]

1714544339

[1714544339]

1714544339

[1714544339]

1714544339

[1714544339]

1714544339

[1714544339]

1714544339

[SpeedDemon13]

does 50 MH/s = 50000 kh/s or 5000 kh/s?

1 mh/s=1,000 kh/s

[SirChewie]

Has a 0.23Mh/s total speed boost on 6 r9 270's as compared to the 2%fee one!!! (with fee disabled)

Good job OP! --Running Ubuntu 14.04

[lasybear]

i'm not getting any speed increase (2.1 mh/s 280x & 7970) over the normal sph-sgminer with darkcoin kernel on windows 7 64 bit.

The 2% version speed was 3.1 mh/s for both cards

Did you select the x11mod kernel? Sounds like you omitted -k x11mod

Your version with settings : -k x11mod -I 15 --gpu-engine 1050 --gpu-memclock 1500 --thread-concurrency 8192 --lookup-gap 2 --gpu-powertune 20



2% version with settings: -I 20 -w 128 --gpu-engine 1050 --gpu-memclock 1500 --thread-concurrency 8128 --gpu-powertune 20



I have tried different parameters but nothing changes

use --gpu-threads 2

[goodluck0319]

what is the setting for 290 non x and 270x?

[smoothdoger]

i'm not getting any speed increase (2.1 mh/s 280x & 7970) over the normal sph-sgminer with darkcoin kernel on windows 7 64 bit.

The 2% version speed was 3.1 mh/s for both cards

Did you select the x11mod kernel? Sounds like you omitted -k x11mod

Your version with settings : -k x11mod -I 15 --gpu-engine 1050 --gpu-memclock 1500 --thread-concurrency 8192 --lookup-gap 2 --gpu-powertune 20



2% version with settings: -I 20 -w 128 --gpu-engine 1050 --gpu-memclock 1500 --thread-concurrency 8128 --gpu-powertune 20



I have tried different parameters but nothing changes

use --gpu-threads 2

it looks to me that the first one is just pissing out worthless shares?

[lasybear]

i'm not getting any speed increase (2.1 mh/s 280x & 7970) over the normal sph-sgminer with darkcoin kernel on windows 7 64 bit.

The 2% version speed was 3.1 mh/s for both cards

Did you select the x11mod kernel? Sounds like you omitted -k x11mod

Your version with settings : -k x11mod -I 15 --gpu-engine 1050 --gpu-memclock 1500 --thread-concurrency 8192 --lookup-gap 2 --gpu-powertune 20



2% version with settings: -I 20 -w 128 --gpu-engine 1050 --gpu-memclock 1500 --thread-concurrency 8128 --gpu-powertune 20



I have tried different parameters but nothing changes

use --gpu-threads 2

it looks to me that the first one is just pissing out worthless shares?

Nope.
You can check hashrate at pool you mine — it calculated for your received shares.

[Amph]

the shares are diplayed in the wrong way

[kocur]

good job, tested one 7950

2% ver 2,735 Mh

Code:

-k darkcoin -g 1 --thread-concurrency 8192 --intensity 18 --gpu-engine 1100 --gpu-memclock 1250 --gpu-powertune 10

-X11mod 2,730 Mh

Code:

-k x11mod -I 15 -w 256 --gpu-threads 2 --thread-concurrency 8192 --gpu-engine 1100 --gpu-memclock 1250 --gpu-powertune 20

I will test 7970 later, but seems to be ok...just share diff is still 0,000 but pool showing full speed, so thats ok
be sure you have 14,3 beta drivers installed for better performance

[goodluck0319]

you mean 14.4 driver and not 13.4 beta driver.

[kocur]

you mean 14.4 driver and not 13.4 beta driver.

yep too much weed .) corrected

edit: I have 14,3 beta installed, not 14,4. I didnt test 14,4 yet

[SpeedDemon13]

good job, tested one 7950

2% ver 2,735 Mh

Code:

-k darkcoin -g 1 --thread-concurrency 8192 --intensity 18 --gpu-engine 1100 --gpu-memclock 1250 --gpu-powertune 10

-X11mod 2,730 Mh

Code:

-k x11mod -I 15 -w 256 --gpu-threads 2 --thread-concurrency 8192 --gpu-engine 1100 --gpu-memclock 1250 --gpu-powertune 20

I will test 7970 later, but seems to be ok...just share diff is still 0,000 but pool showing full speed, so thats ok
be sure you have 14,3 beta drivers installed for better performance

True, it could be just a display issue.

[SuchSamurai]

Could someone compile this for OSX?

[ivan1975]

What settings for 5870?
With this settings: -k x11mod -I 15 --gpu-fan 55 --temp-cutoff 95 --gpu-engine 920 --gpu-memclock 1250 --worksize 256 -g 2
I get only 1.3 Mh/s

[rudarSRB]

thanks!

[Profetu]

What settings for 5870?
With this settings: -k x11mod -I 15 --gpu-fan 55 --temp-cutoff 95 --gpu-engine 920 --gpu-memclock 1250 --worksize 256 -g 2
I get only 1.3 Mh/s

Try with --gpu-threads 2

[ibfragalot2]

I use intensity 18 on the original (2% fee) version just fine. Why not this one?

[bbr]

i'm not getting any speed increase (2.1 mh/s 280x & 7970) over the normal sph-sgminer with darkcoin kernel on windows 7 64 bit.

The 2% version speed was 3.1 mh/s for both cards

Did you select the x11mod kernel? Sounds like you omitted -k x11mod

Your version with settings : -k x11mod -I 15 --gpu-engine 1050 --gpu-memclock 1500 --thread-concurrency 8192 --lookup-gap 2 --gpu-powertune 20



2% version with settings: -I 20 -w 128 --gpu-engine 1050 --gpu-memclock 1500 --thread-concurrency 8128 --gpu-powertune 20



I have tried different parameters but nothing changes

use --gpu-threads 2

I didn't think I needed to put this in my bat file as the bin file created already selected g2 - even when I do use it in the bat file it doesn't change the speed

[bbr]

Managed to get it up to 2.96Mh/s by clearing my environment variables.

Not quite as quick as the 2% one but I will continue tweaking the settings until it is!

Thanks

[Kenta]

Has anyone tried this with PiMP?