[ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer)

[jenveno]

The longest I have been able to get my rig to run is 12 hours. I don't know what's causing it, but it's freezing up and I have to do a hard reboot which isn't convenient since I normally use team viewer. I posted my settings at https://bitcointalk.org/index.php?topic=623409.msg7036775#msg7036775 if anyone can look at them and give me some suggestions. If the miner was just crashing I wouldn't care so much because that's easy to restart. It's just the hard reboots that are killing me.

Working on figuring out settings for gigabyte r9-270's still, I'll post when I find a good config that runs for an extended period. I also use teamviewer...someone needs to make a power strip that can be toggled on and off remotely over the internet....That would be a lifesaver.

[goodluck0319]

is x11 hashrate samething as x13 hashrate or not?

[NRD]

is x11 hashrate samething as x13 hashrate or not?

not, x13 is lower.

[Amph]

is x11 hashrate samething as x13 hashrate or not?

x11 is like 33% more hash, for reference, one 280x does 2.5 with x13 and 3.3 with x11

[Stenull]

I see people with sky high -I in your settings^^
I come from a conservative scrypt mining and uses -I 13 on my rig on x11 with r9 280x.

Is it safe to use this high numbers i see here? I mean, my rig can't freeze up because its on a remote site.
I'm about to try out x13..

-I 16 feels scary xD

[es87]

Bit of a newb here, I am currently mining x-11 (with Darkcoin kernel) with BAMT 1.6, I am interested in switching to x-13, but just cannot figure out how...

If someone is willing to help me out and sort of walk me through a "how-to" I will be more than happy to send some BTC your way.

Please help!

[makishart]

great work! thanx!

[es87]

Bit of a newb here, I am currently mining x-11 (with Darkcoin kernel) with BAMT 1.6, I am interested in switching to x-13, but just cannot figure out how...

If someone is willing to help me out and sort of walk me through a "how-to" I will be more than happy to send some BTC your way.

Please help!

Sorry guys, finally figured it out!

Now, can someone just let me know what an acceptable hash rate is for R9 280x's?

Im getting 2.6mh/s, is that fine?

[lasybear]

Bit of a newb here, I am currently mining x-11 (with Darkcoin kernel) with BAMT 1.6, I am interested in switching to x-13, but just cannot figure out how...

If someone is willing to help me out and sort of walk me through a "how-to" I will be more than happy to send some BTC your way.

Please help!

Sorry guys, finally figured it out!

Now, can someone just let me know what an acceptable hash rate is for R9 280x's?

Im getting 2.6mh/s, is that fine?

x13 - 2.6mh/s is good

[Starscream]

Bit of a newb here, I am currently mining x-11 (with Darkcoin kernel) with BAMT 1.6, I am interested in switching to x-13, but just cannot figure out how...

If someone is willing to help me out and sort of walk me through a "how-to" I will be more than happy to send some BTC your way.

Please help!

Sorry guys, finally figured it out!

Now, can someone just let me know what an acceptable hash rate is for R9 280x's?

Im getting 2.6mh/s, is that fine?

Just copy someone elses config for r9-280x. For x-11 you can go beyond 3.4mh/s I think.

[Ale-x]

I have installed https://github.com/lasybear/sph-sgminer_x11mod on all my rigs (7950, 7970, R9 280X and R9 270). All rigs with 7950, 7970 and R9 280x work perfectly, but rigs with R9 270 hangs out very often from 15 min to 2 hours. But if I set in config
"kernel" : "darkcoin" instead of "kernel" : "x11mod"
rigs work perfectly and stable, but hashrate is more low. Can you fix this?
I have use BAMT 1.3, 1.6.2 and PiMP 1.4.2.

Code:

{
"pools" : [
	{
		"url" : "stratum+tcp://super.pool.com:3333",
		"user" : "user.rig",
		"pass" : "x"
	}
]
,
"auto-fan" : true,
"auto-gpu" : true,
"temp-cutoff" : "80",
"temp-overheat" : "75",
"temp-target" : "60",
"temp-hysteresis" : "2",
"gpu-fan" : "20-100",
"gpu-engine" : "1050",
"gpu-memclock" : "1500",
"gpu-platform" : "0",
"gpu-threads" : "2",
"gpu-powertune" : "0",
"thread-concurrency" : "8192",
"intensity" : "15",
"lookup-gap" : "2",
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"api-port" : "4028",
"vectors" : "1",
"worksize" : "256",
"kernel" : "x11mod",
"log" : "5",
"no-pool-disable" : true,
"no-submit-stale" : true,
"queue" : "2",
"expiry" : "30",
"scan-time" : "30",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
} 

[K1773R]

I have installed https://github.com/lasybear/sph-sgminer_x11mod on all my rigs (7950, 7970, R9 280X and R9 270). All rigs with 7950, 7970 and R9 280x work perfectly, but rigs with R9 270 hangs out very often from 15 min to 2 hours. But if I set in config
"kernel" : "darkcoin" instead of "kernel" : "x11mod"
rigs work perfectly and stable, but hashrate is more low. Can you fix this?
I have use BAMT 1.3, 1.6.2 and PiMP 1.4.2.

Code:

{
"pools" : [
	{
		"url" : "stratum+tcp://super.pool.com:3333",
		"user" : "user.rig",
		"pass" : "x"
	}
]
,
"auto-fan" : true,
"auto-gpu" : true,
"temp-cutoff" : "80",
"temp-overheat" : "75",
"temp-target" : "60",
"temp-hysteresis" : "2",
"gpu-fan" : "20-100",
"gpu-engine" : "1050",
"gpu-memclock" : "1500",
"gpu-platform" : "0",
"gpu-threads" : "2",
"gpu-powertune" : "0",
"thread-concurrency" : "8192",
"intensity" : "15",
"lookup-gap" : "2",
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"api-port" : "4028",
"vectors" : "1",
"worksize" : "256",
"kernel" : "x11mod",
"log" : "5",
"no-pool-disable" : true,
"no-submit-stale" : true,
"queue" : "2",
"expiry" : "30",
"scan-time" : "30",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
} 

RTFM of x11mod

[grendel25]

anyone got X13 working for 5870 or 5970?

[hero18688]

Can someone give me a conf for 290 reference board?
I use the conf for my tri-x but it runs low at 2.0mh/s on my friend's 290 reference board.And it hangs after 10 minute.
Posted from Bitcointa.lk - #A0jyY6ZezrMFGH4A


configs shouldn't change all that much between ref and aftermarket boards, only the clocks will. I would check what drivers he's on.

14.4.The same as I installed for my tri-x which worked perfectly.But in his case not.
Posted from Bitcointa.lk - #rC0iK49qhkpgf5Xk

[Amgclk65]

The longest I have been able to get my rig to run is 12 hours. I don't know what's causing it, but it's freezing up and I have to do a hard reboot which isn't convenient since I normally use team viewer. I posted my settings at https://bitcointalk.org/index.php?topic=623409.msg7036775#msg7036775 if anyone can look at them and give me some suggestions. If the miner was just crashing I wouldn't care so much because that's easy to restart. It's just the hard reboots that are killing me.

Working on figuring out settings for gigabyte r9-270's still, I'll post when I find a good config that runs for an extended period. I also use teamviewer...someone needs to make a power strip that can be toggled on and off remotely over the internet....That would be a lifesaver.

Try one to these. i believe you can run 1500 watts through it.
http://www.belkin.com/us/p/P-F7C027/

[GBattaglia]

Welp, the value of X11 rentals drops further. It is becoming a battle of who is the most updated now more than anything.

[Amgclk65]

I have installed https://github.com/lasybear/sph-sgminer_x11mod on all my rigs (7950, 7970, R9 280X and R9 270). All rigs with 7950, 7970 and R9 280x work perfectly, but rigs with R9 270 hangs out very often from 15 min to 2 hours. But if I set in config
"kernel" : "darkcoin" instead of "kernel" : "x11mod"
rigs work perfectly and stable, but hashrate is more low. Can you fix this?
I have use BAMT 1.3, 1.6.2 and PiMP 1.4.2.

Code:

{
"pools" : [
	{
		"url" : "stratum+tcp://super.pool.com:3333",
		"user" : "user.rig",
		"pass" : "x"
	}
]
,
"auto-fan" : true,
"auto-gpu" : true,
"temp-cutoff" : "80",
"temp-overheat" : "75",
"temp-target" : "60",
"temp-hysteresis" : "2",
"gpu-fan" : "20-100",
"gpu-engine" : "1050",
"gpu-memclock" : "1500",
"gpu-platform" : "0",
"gpu-threads" : "2",
"gpu-powertune" : "0",
"thread-concurrency" : "8192",
"intensity" : "15",
"lookup-gap" : "2",
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"api-port" : "4028",
"vectors" : "1",
"worksize" : "256",
"kernel" : "x11mod",
"log" : "5",
"no-pool-disable" : true,
"no-submit-stale" : true,
"queue" : "2",
"expiry" : "30",
"scan-time" : "30",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
} 

Im in the same boat. I can't get my 270 to hash x11 for any length of time. It also needs a hard reboot. Hopefully some one can get it going for us 270 guys,

[Ale-x]

Im in the same boat. I can't get my 270 to hash x11 for any length of time. It also needs a hard reboot. Hopefully some one can get it going for us 270 guys,

Now I'm testing this config:

Code:

{
"pools" : [
	{
		"url" : "stratum+tcp://super.pool.com:3333",
		"user" : "user.rig",
		"pass" : "x"
	}
]
,
"auto-fan" : true,
"auto-gpu" : true,
"temp-cutoff" : "80",
"temp-overheat" : "75",
"temp-target" : "60",
"temp-hysteresis" : "2",
"gpu-fan" : "20-100",
"gpu-engine" : "1000-1100",
"gpu-memclock" : "1250-1500",
"gpu-platform" : "0",
"gpu-threads" : "2",
"gpu-powertune" : "0",
"thread-concurrency" : "0",
"shaders" : "1280",
"xintensity" : "512",
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"api-port" : "4028",
"vectors" : "1",
"worksize" : "128",
"kernel" : "x11mod",
"log" : "5",
"no-pool-disable" : true,
"no-submit-stale" : true,
"expiry" : "30",
"scan-time" : "30",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

Try it. Change only pool and username to yours.

[Amgclk65]

Im in the same boat. I can't get my 270 to hash x11 for any length of time. It also needs a hard reboot. Hopefully some one can get it going for us 270 guys,

Now I'm testing this config:

Code:

{
"pools" : [
	{
		"url" : "stratum+tcp://super.pool.com:3333",
		"user" : "user.rig",
		"pass" : "x"
	}
]
,
"auto-fan" : true,
"auto-gpu" : true,
"temp-cutoff" : "80",
"temp-overheat" : "75",
"temp-target" : "60",
"temp-hysteresis" : "2",
"gpu-fan" : "20-100",
"gpu-engine" : "1000-1100",
"gpu-memclock" : "1250-1500",
"gpu-platform" : "0",
"gpu-threads" : "2",
"gpu-powertune" : "0",
"thread-concurrency" : "0",
"shaders" : "1280",
"xintensity" : "512",
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"api-port" : "4028",
"vectors" : "1",
"worksize" : "128",
"kernel" : "x11mod",
"log" : "5",
"no-pool-disable" : true,
"no-submit-stale" : true,
"expiry" : "30",
"scan-time" : "30",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

Try it. Change only pool and username to yours.

Ok ill give it try. thanks

[Wolf_Pack]

The longest I have been able to get my rig to run is 12 hours. I don't know what's causing it, but it's freezing up and I have to do a hard reboot which isn't convenient since I normally use team viewer. I posted my settings at https://bitcointalk.org/index.php?topic=623409.msg7036775#msg7036775 if anyone can look at them and give me some suggestions. If the miner was just crashing I wouldn't care so much because that's easy to restart. It's just the hard reboots that are killing me.

Working on figuring out settings for gigabyte r9-270's still, I'll post when I find a good config that runs for an extended period. I also use teamviewer...someone needs to make a power strip that can be toggled on and off remotely over the internet....That would be a lifesaver.

The second set of settings in my Gigabyte R9 270.  It's been running great since yesterday. Right around 2.2 Mh/s.

Code:

"auto-fan" : true,
"temp-cutoff" : "85,85",
"temp-target" : "73,75",
"gpu-fan" : "55-100,75-100",
"xintensity" : "512,512",
"vectors" : "1,1",
"worksize" : "256,128",
"lookup-gap" : "2",
"thread-concurrency" : "8192,5121",
"shaders" : "1792,1280",
"api-listen" : true,
"api-port" : "4028",
"api-allow" : "W:127.0.0.1",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-threads" : "2,2",
"gpu-platform" : "0",
"gpu-engine" : "1170,1200",
"gpu-memclock" : "1500,1500",
"gpu-powertune" : "20,20",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"kernel" : "x11mod"