[ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer)

[Remember remember the 5th of November]

Poolnames just work for me from the beginning. Just use "poolname"

"Poolname" : "miningrentalrigs x13",

Code:

sgminer 4.1.0 - Started: [2014-05-30 14:20:27]
--------------------------------------------------------------------------------
(5s):9.282M (avg):9.188Mh/s | A:10  R:0  HW:0  WU:0.130/m
ST: 1  SS: 0  NB: 190  LW: 11291  GF: 0  RF: 0
Connected to miningrentalrigs x13 (stratum) diff 0.062 as user xxxxx
Block: 320c8e16...  Diff:916  Started: [15:53:53]  Best share: 18
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU  0:  60.0C 2707RPM | 2.296M/2.300Mh/s | R:  1.8% HW:0 WU:0.032/m I:19
 GPU  1:  45.0C  65%    | OFF   / 0.000h/s | R:  0.0% HW:0 WU:0.000/m I:19
 GPU  2:  62.0C 3218RPM | 2.293M/2.295Mh/s | R:  1.8% HW:0 WU:0.035/m I:19
 GPU  3:  56.0C 3197RPM | 2.279M/2.296Mh/s | R:  1.9% HW:0 WU:0.033/m I:19
 GPU  4:  56.0C 2792RPM | 2.300M/2.299Mh/s | R:  2.0% HW:0 WU:0.031/m I:19
--------------------------------------------------------------------------------
[15:50:14] Accepted 0f0b8ae3 Diff 0.066/0.062 GPU 2 at miningrentalrigs x13
[15:50:17] Accepted 0b5f2840 Diff 0.088/0.062 GPU 0 at miningrentalrigs x13
[15:50:34] Accepted 0205e531 Diff 0.494/0.062 GPU 2 at miningrentalrigs x13

Actually with some changes I've pushed to lasybear's git the pool name will be the pool URL, since otherwise it requires you to manually input it.

[1714100698]

1714100698

[bullus]

Poolnames just work for me from the beginning. Just use "poolname"

"Poolname" : "miningrentalrigs x13",

Code:

sgminer 4.1.0 - Started: [2014-05-30 14:20:27]
--------------------------------------------------------------------------------
(5s):9.282M (avg):9.188Mh/s | A:10  R:0  HW:0  WU:0.130/m
ST: 1  SS: 0  NB: 190  LW: 11291  GF: 0  RF: 0
Connected to miningrentalrigs x13 (stratum) diff 0.062 as user xxxxx
Block: 320c8e16...  Diff:916  Started: [15:53:53]  Best share: 18
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU  0:  60.0C 2707RPM | 2.296M/2.300Mh/s | R:  1.8% HW:0 WU:0.032/m I:19
 GPU  1:  45.0C  65%    | OFF   / 0.000h/s | R:  0.0% HW:0 WU:0.000/m I:19
 GPU  2:  62.0C 3218RPM | 2.293M/2.295Mh/s | R:  1.8% HW:0 WU:0.035/m I:19
 GPU  3:  56.0C 3197RPM | 2.279M/2.296Mh/s | R:  1.9% HW:0 WU:0.033/m I:19
 GPU  4:  56.0C 2792RPM | 2.300M/2.299Mh/s | R:  2.0% HW:0 WU:0.031/m I:19
--------------------------------------------------------------------------------
[15:50:14] Accepted 0f0b8ae3 Diff 0.066/0.062 GPU 2 at miningrentalrigs x13
[15:50:17] Accepted 0b5f2840 Diff 0.088/0.062 GPU 0 at miningrentalrigs x13
[15:50:34] Accepted 0205e531 Diff 0.494/0.062 GPU 2 at miningrentalrigs x13

Actually with some changes I've pushed to lasybear's git the pool name will be the pool URL, since otherwise it requires you to manually input it.

so u don't have to set it anymore?

If I set it manually with "poolname" will it override the default settings?

[goodluck0319]

what is xintensity for 290 non x and 270x?

[lasybear]

what is xintensity for 290 non x and 270x?

Try xintesity from 52 and greater.
For my 270x xintensity 56 is good.

[count_cyrpto]

And 4 Gigabyte R9-270 I have yet to get a stable setting for, anything I've tried so far locks up my machine.

I also have 3 r9 270's, and have yet to find the right settings. Usually freezes after 45 minutes to an hour.

Tried setting intensity down to 16, and xintensity down to 51 to 56... Still nothing..

I have a PowerColor 280x and a Gigabyte 270 that I have had running stable for the past 10 hours (fingers crossed).  The second card is my 270.

Code:

"auto-fan" : true,
"temp-cutoff" : "85,85",
"temp-target" : "73,75",
"gpu-fan" : "55-100,75-100",
"xintensity" : "512,512",
"vectors" : "1,1",
"worksize" : "256,128",
"lookup-gap" : "2",
"thread-concurrency" : "8192,5121",
"shaders" : "1792,1280",
"api-listen" : true,
"api-port" : "4028",
"api-allow" : "W:127.0.0.1",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-threads" : "2,2",
"gpu-platform" : "0",
"gpu-engine" : "1070,1200",
"gpu-memclock" : "1500,1500",
"gpu-powertune" : "20,20",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"kernel" : "x11mod"
}

Code:

sgminer 4.1.0 - Started: [2014-05-30 00:04:18]
--------------------------------------------------------------------------------
(5s):5.340M (avg):5.320Mh/s | A:23  R:0  HW:0  WU:0.075/m
ST: 6  SS: 0  NB: 1931  LW: 1769  GF: 62  RF: 0
Connected to Pool 0 (longpoll) diff 62 as user Wolf_Pack
Block: 8b0ae4c6...  Diff:745  Started: [10:04:54]  Best share: 157
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  54.0C 2102RPM | 3.142M/3.120Mh/s | R:  0.0% HW:0 WU:0.044/m xI:512
 GPU 1:  60.0C 2398RPM | 2.213M/2.200Mh/s | R:  0.0% HW:0 WU:0.031/m xI:512
--------------------------------------------------------------------------------
[10:03:27] Stratum from Pool 2 detected new block
[10:03:27] Network diff set to 62
[10:03:27] New block detected on network before pool notification
[10:04:26] Network diff set to 758
[10:04:26] Stratum from Pool 2 detected new block
[10:04:37] Network diff set to 627
[10:04:37] Stratum from Pool 2 detected new block
[10:04:42] Network diff set to 669
[10:04:42] Stratum from Pool 2 detected new block

What catalyst drivers are you using? OS?

I'm using 13.11 on windows 7...

I'm using the same.

• Windows 7
• 13.12
• https://www.dropbox.com/s/59lvecndm866bzz/sph-sgminer_x11mod_b2.zip

I want to try the updated miner, but since it took so long to get this mining without locking up my rig, I decided to let it run as long as I can.

I don't blame you...

I'm going to install 13.12 to see if that makes a difference.

[tr0ubles0me]

Poolnames just work for me from the beginning. Just use "poolname"

"Poolname" : "miningrentalrigs x13",

Code:

sgminer 4.1.0 - Started: [2014-05-30 14:20:27]
--------------------------------------------------------------------------------
(5s):9.282M (avg):9.188Mh/s | A:10  R:0  HW:0  WU:0.130/m
ST: 1  SS: 0  NB: 190  LW: 11291  GF: 0  RF: 0
Connected to miningrentalrigs x13 (stratum) diff 0.062 as user xxxxx
Block: 320c8e16...  Diff:916  Started: [15:53:53]  Best share: 18
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU  0:  60.0C 2707RPM | 2.296M/2.300Mh/s | R:  1.8% HW:0 WU:0.032/m I:19
 GPU  1:  45.0C  65%    | OFF   / 0.000h/s | R:  0.0% HW:0 WU:0.000/m I:19
 GPU  2:  62.0C 3218RPM | 2.293M/2.295Mh/s | R:  1.8% HW:0 WU:0.035/m I:19
 GPU  3:  56.0C 3197RPM | 2.279M/2.296Mh/s | R:  1.9% HW:0 WU:0.033/m I:19
 GPU  4:  56.0C 2792RPM | 2.300M/2.299Mh/s | R:  2.0% HW:0 WU:0.031/m I:19
--------------------------------------------------------------------------------
[15:50:14] Accepted 0f0b8ae3 Diff 0.066/0.062 GPU 2 at miningrentalrigs x13
[15:50:17] Accepted 0b5f2840 Diff 0.088/0.062 GPU 0 at miningrentalrigs x13
[15:50:34] Accepted 0205e531 Diff 0.494/0.062 GPU 2 at miningrentalrigs x13

Actually with some changes I've pushed to lasybear's git the pool name will be the pool URL, since otherwise it requires you to manually input it.

Neither the server address shows without setting manually a name, nor a name shows when manually setting one (with "name" or "poolname"). Is it only me? I'm using the latest version Elun submitted. My conf-file is on page 36, with the big picture. Can somebody take a look. Thanks.

[deephouse]

Keeps crashing my Win 7 after 3-4 hours. On HD 7970

[lasybear]

Poolnames just work for me from the beginning. Just use "poolname"

"Poolname" : "miningrentalrigs x13",

Code:

sgminer 4.1.0 - Started: [2014-05-30 14:20:27]
--------------------------------------------------------------------------------
(5s):9.282M (avg):9.188Mh/s | A:10  R:0  HW:0  WU:0.130/m
ST: 1  SS: 0  NB: 190  LW: 11291  GF: 0  RF: 0
Connected to miningrentalrigs x13 (stratum) diff 0.062 as user xxxxx
Block: 320c8e16...  Diff:916  Started: [15:53:53]  Best share: 18
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU  0:  60.0C 2707RPM | 2.296M/2.300Mh/s | R:  1.8% HW:0 WU:0.032/m I:19
 GPU  1:  45.0C  65%    | OFF   / 0.000h/s | R:  0.0% HW:0 WU:0.000/m I:19
 GPU  2:  62.0C 3218RPM | 2.293M/2.295Mh/s | R:  1.8% HW:0 WU:0.035/m I:19
 GPU  3:  56.0C 3197RPM | 2.279M/2.296Mh/s | R:  1.9% HW:0 WU:0.033/m I:19
 GPU  4:  56.0C 2792RPM | 2.300M/2.299Mh/s | R:  2.0% HW:0 WU:0.031/m I:19
--------------------------------------------------------------------------------
[15:50:14] Accepted 0f0b8ae3 Diff 0.066/0.062 GPU 2 at miningrentalrigs x13
[15:50:17] Accepted 0b5f2840 Diff 0.088/0.062 GPU 0 at miningrentalrigs x13
[15:50:34] Accepted 0205e531 Diff 0.494/0.062 GPU 2 at miningrentalrigs x13

Actually with some changes I've pushed to lasybear's git the pool name will be the pool URL, since otherwise it requires you to manually input it.

Neither the server address shows without setting manually a name, nor a name shows when manually setting one (with "name" or "poolname"). Is it only me? I'm using the latest version Elun submitted. My conf-file is on page 36, with the big picture. Can somebody take a look. Thanks.

Code:

"pools" : [
        {
                "poolname" : "BOOST suprnova",
                "url" : "stratum+tcp://boost.suprnova.cc:3311",
                "user" : "someone.5",
                "pass" : "p"
        }

Code:

sgminer  - Started: [2014-05-30 20:43:45] - [0 days 00:37:01]
--------------------------------------------------------------------------------
(5s):2.813M (avg):2.780Mh/s | A:1  R:0  HW:0  WU:0.038/m
ST: 0  SS: 2  NB: 68  LW: 3555  GF: 0  RF: 0
Connected to BOOST suprnova (stratum) diff 0.016 as user someone.5
Block: f8e67ace...  Diff:862  Started: [21:19:50]  Best share: 0.740
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  66.0C 1485RPM | 2.776M/2.782Mh/s | R:  0.0% HW:0 WU:0.038/m xI: 56
--------------------------------------------------------------------------------
[21:10:22] Stratum from BOOST suprnova detected new block
[21:10:54] BOOST suprnova difficulty changed to 0.008
[21:10:54] Accepted 117190b8 Diff 0.057/0.016 GPU 0 at BOOST suprnova
[21:11:07] Stratum from BOOST suprnova detected new block
[21:11:15] Accepted 24740996 Diff 0.027/0.008 GPU 0 at BOOST suprnova
[21:11:33] Accepted 723fbc7b Diff 0.009/0.008 GPU 0 at BOOST suprnova

[SpeedDemon13]

anyone has settings for 6750

Code:

"device" : "0,1,2",
"intensity" : "18",
"vectors" : "1",
"worksize" : "128",
"lookup-gap" : "2",
"thread-concurrency" : "8000",
"gpu-vddc" : "1.1",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "4",
"gpu-engine" : "880",
"gpu-memclock" : "1350",
"gpu-fan" : "100",
"no-pool-disable" : true,
"no-submit-stale" : true,
"queue" : "1",
"scan-time" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel" : "x11mod",
"kernel-path" : "/usr/local/bin"

This is what I use on an old mining rig with 2x 6950's and a 6970. Maybe use 4000~6400 for the tc instead and play around with the core/mem clocks a bit.

[deephouse]

Anyone have good config for HD 7950? Mine keeps crashing my Win 7 after 3-4 hours

sgminer -k x11mod -o stratum+tcp://stratum.multipoolmining.com:5555 -u USER -p x -I 17 -g 1 -w 256 --lookup-gap 2 --gpu-engine 1100 --gpu-memclock 1500 --gpu-powertune 20 --thread-concurrency 24000 --temp-cutoff 95 --temp-overheat 85 --temp-target 75 --api-listen --api-allow W:127.0.0.1

[qwep]

Help with setting 6750 13.12 drivers constantly HW 

[lasybear]

Anyone have good config for HD 7950? Mine keeps crashing my Win 7 after 3-4 hours

sgminer -k x11mod -o stratum+tcp://stratum.multipoolmining.com:5555 -u USER -p x -I 17 -g 1 -w 256 --lookup-gap 2 --gpu-engine 1100 --gpu-memclock 1500 --gpu-powertune 20 --thread-concurrency 24000 --temp-cutoff 95 --temp-overheat 85 --temp-target 75 --api-listen --api-allow W:127.0.0.1

worksize 128, xintensity 56 and little bit lower gpu-engine, maybe 1050.

[lasybear]

Help with setting 6750 13.12 drivers constantly HW 

Unfortunately, still no progress with 5xxx/6xxx cards.

[SpeedDemon13]

Help with setting 6750 13.12 drivers constantly HW  

Unfortunately, still no progress with 5xxx/6xxx cards.

I have no issues with x11mod on the 6900's series cards, but the 5800's series cards some times have issues. 5xxx/6xxx just have too many issues with x13mod.

I'm running 14.4 driver on the 6900's cards.

[K1773R]

Help with setting 6750 13.12 drivers constantly HW 

Unfortunately, still no progress with 5xxx/6xxx cards.

my 58{5,7}0 and 6990 work fine with x11mod

[tr0ubles0me]

Poolnames just work for me from the beginning. Just use "poolname"

"Poolname" : "miningrentalrigs x13",

Code:

sgminer 4.1.0 - Started: [2014-05-30 14:20:27]
--------------------------------------------------------------------------------
(5s):9.282M (avg):9.188Mh/s | A:10  R:0  HW:0  WU:0.130/m
ST: 1  SS: 0  NB: 190  LW: 11291  GF: 0  RF: 0
Connected to miningrentalrigs x13 (stratum) diff 0.062 as user xxxxx
Block: 320c8e16...  Diff:916  Started: [15:53:53]  Best share: 18
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU  0:  60.0C 2707RPM | 2.296M/2.300Mh/s | R:  1.8% HW:0 WU:0.032/m I:19
 GPU  1:  45.0C  65%    | OFF   / 0.000h/s | R:  0.0% HW:0 WU:0.000/m I:19
 GPU  2:  62.0C 3218RPM | 2.293M/2.295Mh/s | R:  1.8% HW:0 WU:0.035/m I:19
 GPU  3:  56.0C 3197RPM | 2.279M/2.296Mh/s | R:  1.9% HW:0 WU:0.033/m I:19
 GPU  4:  56.0C 2792RPM | 2.300M/2.299Mh/s | R:  2.0% HW:0 WU:0.031/m I:19
--------------------------------------------------------------------------------
[15:50:14] Accepted 0f0b8ae3 Diff 0.066/0.062 GPU 2 at miningrentalrigs x13
[15:50:17] Accepted 0b5f2840 Diff 0.088/0.062 GPU 0 at miningrentalrigs x13
[15:50:34] Accepted 0205e531 Diff 0.494/0.062 GPU 2 at miningrentalrigs x13

Actually with some changes I've pushed to lasybear's git the pool name will be the pool URL, since otherwise it requires you to manually input it.

Neither the server address shows without setting manually a name, nor a name shows when manually setting one (with "name" or "poolname"). Is it only me? I'm using the latest version Elun submitted. My conf-file is on page 36, with the big picture. Can somebody take a look. Thanks.

Code:

"pools" : [
        {
                "poolname" : "BOOST suprnova",
                "url" : "stratum+tcp://boost.suprnova.cc:3311",
                "user" : "someone.5",
                "pass" : "p"
        }

Code:

sgminer  - Started: [2014-05-30 20:43:45] - [0 days 00:37:01]
--------------------------------------------------------------------------------
(5s):2.813M (avg):2.780Mh/s | A:1  R:0  HW:0  WU:0.038/m
ST: 0  SS: 2  NB: 68  LW: 3555  GF: 0  RF: 0
Connected to BOOST suprnova (stratum) diff 0.016 as user someone.5
Block: f8e67ace...  Diff:862  Started: [21:19:50]  Best share: 0.740
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  66.0C 1485RPM | 2.776M/2.782Mh/s | R:  0.0% HW:0 WU:0.038/m xI: 56
--------------------------------------------------------------------------------
[21:10:22] Stratum from BOOST suprnova detected new block
[21:10:54] BOOST suprnova difficulty changed to 0.008
[21:10:54] Accepted 117190b8 Diff 0.057/0.016 GPU 0 at BOOST suprnova
[21:11:07] Stratum from BOOST suprnova detected new block
[21:11:15] Accepted 24740996 Diff 0.027/0.008 GPU 0 at BOOST suprnova
[21:11:33] Accepted 723fbc7b Diff 0.009/0.008 GPU 0 at BOOST suprnova

I changed to "poolname" (as I only had "name"), but still miner shows Pool 0, Pool 1, etc. The only difference with your config is that CGWatcher has put extra pool priority line for every pool. All is fine in karloth's cgminer, with "name" and pool-priority. I just can't figure it out... Damn it!

Code:

	{
		"poolname" : "Suchpool, EU",
		"url" : "stratum+tcp://stratum-eu.suchpool.pw:3335",
		"user" : "tr0ubles0me.h81pro",
		"pass" : "xxxx",
		"pool-priority" : "0"
	},

[OmarGsPools]

I don't have any temp or fan readings after running the pmupdate and pimpupdate scripts for PIMP. Has anyone run into this issue? It worked at first but after a restart I've lost temps and fan readings.

I can confirm it's using the new SGMINER from lasybear. I've tried re-running the script to reinstall it but nothing.

[qwep]

Help with setting 6750 13.12 drivers constantly HW  

Unfortunately, still no progress with 5xxx/6xxx cards.

I have no issues with x11mod on the 6900's series cards, but the 5800's series cards some times have issues. 5xxx/6xxx just have too many issues with x13mod.

I'm running 14.4 driver on the 6900's cards.

14.4 tried too error

[Anonymousg64]

trying to compile from source for linux, sgminer binary is nowhere top be found after make

EDIT:
got the binary from doing make -n after make to get the gcc command and run it manually

[t00tie]

Help with setting 6750 13.12 drivers constantly HW 

Unfortunately, still no progress with 5xxx/6xxx cards.

My 5970 works great with the windows build posted today at 2*1.8Mh, awesome speed for an ancient card.

I have a 6950 also doing 1.74Mh happily.

win 7 64, 13.12 whql drivers, sgminer_x11x13mod_30_05_2014