LordTheron
|
|
May 15, 2013, 10:20:42 PM |
|
when i put bitcoind, cursor is just flashing, it doesnt say its staring or anything.
Anyway I got it working, Ive used rpc user and pass exactly as in the guide and its says bitcoin server starting. Quick question.. how complex the password has to be? looks like it wasn't happy with my rpcpassword or rpcuser.
Also should I see anything else except bitcoin server staring? its been sitting on it for about 10 min.
|
|
|
|
tiktoc
|
|
May 15, 2013, 11:07:42 PM |
|
Put it in the background still with the -daemon flag
if it is syncing from scratch it will take two to 8 hours depending on connection speed and server speed.
|
|
|
|
hoss
Newbie
Offline
Activity: 52
Merit: 0
|
|
May 19, 2013, 08:31:27 PM |
|
Question: If I mine BTC and earn a reward for shares at say ~.000xBTC or less, then how does that get transferred to my wallet without a network fee? My current pool saves my reward up to 1BTC then sends it to my address thus avoiding the fee. (currently @ 1.5GHs)
|
|
|
|
bitpop
Legendary
Offline
Activity: 2912
Merit: 1060
|
|
May 19, 2013, 08:56:35 PM |
|
There is no transfer. These are virgin coins that get attached to your address. They are attached not transferred.
|
|
|
|
bitpop
Legendary
Offline
Activity: 2912
Merit: 1060
|
|
May 19, 2013, 08:59:27 PM |
|
There's another nuance you should be aware of though. You can't spend virgin coins for 120 confirmations. Pros and cons baby.
|
|
|
|
prophetx
Legendary
Offline
Activity: 1666
Merit: 1010
he who has the gold makes the rules
|
|
May 25, 2013, 10:58:11 AM |
|
anyone know what the parameter is to limit the payment tx to a miner so that it only get's sent out when they reach a certain threshold?
I'm getting these tiny micro payments every hour and it's causing litecoin qt to try to charge me 3.4 ltc just to send out 11 ltc!!
|
|
|
|
bitpop
Legendary
Offline
Activity: 2912
Merit: 1060
|
|
May 25, 2013, 11:03:23 AM |
|
You can't wait
|
|
|
|
Decagrog
|
|
May 28, 2013, 09:07:22 AM |
|
Hi, I'm trying to start a digitalcoin p2pool, I've installed narken p2pool and already succesfully tested with litecoin, so I decided to try with other altcoin...on the digitalcoin thread there are posted the configurations for p2pool/networks.py and p2pool/bitcoin/networks.py digital=math.Object( PARENT=networks.nets['digital'], SHARE_PERIOD=15, # seconds target spacing CHAIN_LENGTH=24*60*60//10, # shares REAL_CHAIN_LENGTH=24*60*60//10, # shares TARGET_LOOKBEHIND=200, # shares coinbase maturity SPREAD=30, # blocks IDENTIFIER='be43F6b8c6927210'.decode('hex'), PREFIX='b587193ba6d4749a'.decode('hex'), P2P_PORT=5477, MIN_TARGET=0, MAX_TARGET=2**256//2**20 - 1, PERSIST=False, WORKER_PORT=9500, BOOTSTRAP_ADDRS=''.split(' '), ANNOUNCE_CHANNEL='#p2pool-alt', VERSION_CHECK=lambda v: True, ), digital=math.Object( P2P_PREFIX='fbc0b6db'.decode('hex'), P2P_PORT=7999, ADDRESS_VERSION=30, RPC_PORT=7998, RPC_CHECK=defer.inlineCallbacks(lambda bitcoind: defer.returnValue( 'digitalcoinaddress' in (yield bitcoind.rpc_help()) and not (yield bitcoind.rpc_getinfo())['testnet'] )), SUBSIDY_FUNC=lambda height: 1*10000000 >> (height + 1)//1080000, POW_FUNC=lambda data: pack.IntType(256).unpack(__import__('ltc_scrypt').getPoWHash(data)), BLOCK_PERIOD=30, # s targetspacing SYMBOL='DGC', CONF_FILE_FUNC=lambda: os.path.join(os.path.join(os.environ['APPDATA'], 'franko') if platform.system() == 'Windows' else os.path.expanduser('~/Library/Application Support/Doubloons/') if platform.system() == 'Darwin' else os.path.expanduser('~/.digitalcoin'), 'digitalcoin.conf'), BLOCK_EXPLORER_URL_PREFIX='http://54.244.192.52/doubloon/block/', ADDRESS_EXPLORER_URL_PREFIX='http://54.244.192.52/doubloon/address/', SANE_TARGET_RANGE=(2**256//100000000 - 1, 2**256//1000 - 1), DUMB_SCRYPT_DIFF=2**16, ), My digitalcoin.conf is: rpcuser=xxx rpcpassword=xxx server=1 daemon=1 rpcport=7998 port=7999
When I'm starting the p2pool I get this error: 2013-05-28 03:52:08.715777 Initializing work... 2013-05-28 03:52:08.800143 ...success! 2013-05-28 03:52:08.800265 2013-05-28 03:52:08.800346 Joining p2pool network using port 5477... 2013-05-28 03:52:08.801582 ...success! 2013-05-28 03:52:08.801656 2013-05-28 03:52:08.802686 Listening for workers on '' port 9500... 2013-05-28 03:52:08.839512 ...success! 2013-05-28 03:52:08.839627 2013-05-28 03:52:08.839696 Started successfully! 2013-05-28 03:52:08.839769 Go to http://127.0.0.1:9500/ to view graphs and statistics! 2013-05-28 03:52:08.839849 Donating 0.0% of work towards P2Pool's development. Please donate to encourage further development of P2Pool! 2013-05-28 03:52:08.839930 2013-05-28 03:52:08.846531 Peer 0.0.0.0:5477 misbehaving, will drop and ban. Reason: was connected to self 2013-05-28 03:52:08.847887 Peer 127.0.0.1:33164 misbehaving, will drop and ban. Reason: was connected to self 2013-05-28 03:52:11.840261 P2Pool: 0 shares in chain (0 verified/0 total) Peers: 0 (0 incoming) 2013-05-28 03:52:11.840398 Local: 0H/s in last 0.0 seconds Local dead on arrival: ??? Expected time to share: ??? 2013-05-28 03:52:26.841202 P2Pool: 0 shares in chain (0 verified/0 total) Peers: 0 (0 incoming) 2013-05-28 03:52:26.841310 Local: 0H/s in last 0.0 seconds Local dead on arrival: ??? Expected time to share: ??? 2013-05-28 03:52:41.841972 P2Pool: 0 shares in chain (0 verified/0 total) Peers: 0 (0 incoming) 2013-05-28 03:52:41.842061 Local: 0H/s in last 0.0 seconds Local dead on arrival: ??? Expected time to share: ??? 2013-05-28 03:52:56.842672 P2Pool: 0 shares in chain (0 verified/0 total) Peers: 0 (0 incoming)
it seems that I can't connect outside? I've also temporary disabled the firewall but with no change... The command used to start the p2pool is that: screen -d -m -S ltcp2pool ./run_p2pool.py --give-author 0 --fee 0 --bitcoind-p2p-port 7999 --bitcoind-rpc-port 7998 --net digital xxx xxx
If I try to mine I can't even connect to the p2pool, can anyone give me an hint?
|
|
|
|
bitpop
Legendary
Offline
Activity: 2912
Merit: 1060
|
|
May 28, 2013, 09:09:41 AM |
|
You have no peers BOOTSTRAP_ADDRS=''.split(' '), This is a peer2peer pool
|
|
|
|
Decagrog
|
|
May 28, 2013, 09:40:04 AM |
|
You have no peers BOOTSTRAP_ADDRS=''.split(' '), This is a peer2peer pool
Thanks for point me that...I thought would be able at least to mine locally, if If I were the first to setup a p2pool what address should i put? Also, I've added 3-4 p2pool address founded in the digicoin OP first post but I can't connect to anyone ( Handshake timed out, disconnecting from x.x.x.x )
|
|
|
|
bitpop
Legendary
Offline
Activity: 2912
Merit: 1060
|
|
May 28, 2013, 09:48:10 AM |
|
I dont know but it seems it keeps trying to connect to itself so I'm pretty sure it needs atleast one peer. It's how it secures itself.
|
|
|
|
|
Decagrog
|
|
June 01, 2013, 12:52:01 PM |
|
I was using hakabane network.py and helper.py files so I assume that the problem is not here... Adding your pool url to bootstrap parameter can get past the p2pool error but still i cant connect with cgminer: [2013-06-01 14:34:44] Testing pool http://208.117.43.200:9327 [2013-06-01 14:34:45] HTTP request failed: The requested URL returned error: 401 [2013-06-01 14:34:45] HTTP request failed: The requested URL returned error: 401 [2013-06-01 14:35:44] No servers were found that could be used to get work from. [2013-06-01 14:35:44] Please check the details from the list below of the servers you have input [2013-06-01 14:35:44] Most likely you have input the wrong URL, forgotten to add a port, or have no t set up workers double checked url and tried to change to other ports but with no luck....
|
|
|
|
CartmanSPC
Legendary
Offline
Activity: 1270
Merit: 1000
|
|
June 01, 2013, 07:34:21 PM |
|
I had to turn off connecting to other Digitalcoin P2Pools using hakabanes code. Too many orphans.
Check to see that incoming TCP connections to the port your using (9327) are open on the firewall. Will try it now...ok it shows as being down so I can't connect to your pool either.
|
|
|
|
Decagrog
|
|
June 01, 2013, 09:56:29 PM Last edit: June 02, 2013, 07:22:50 AM by Decagrog |
|
I had to turn off connecting to other Digitalcoin P2Pools using hakabanes code. Too many orphans.
Check to see that incoming TCP connections to the port your using (9327) are open on the firewall. Will try it now...ok it shows as being down so I can't connect to your pool either.
Sorry I've the pool still active but I've switched back to port 7998 , still same problem...I've the firewall temporary disableb and if I try to telnet 208.117.43.200 7998 the port result open. The strange thing is that I've managed to connect the miner to the pool only using the same username and pass in the digicoin.conf...well it only connect but then can't mine, the frontend graph don't show any miner If someone want to give a try the p2pool url is 208.117.43.200:7998 and frontend is http://208.117.43.200:25397/static/
|
|
|
|
Decagrog
|
|
June 02, 2013, 08:00:06 PM |
|
I've finally got the pool to work! Didn't found the exact problem but I've downloaded and compiled again the digicoin source and started flawlessly If someone want to test the p2pool the final address is http://208.117.43.200:5400 (yes i've changed the port again), I'm putting on it about 1.1mh/s
|
|
|
|
CartmanSPC
Legendary
Offline
Activity: 1270
Merit: 1000
|
|
June 03, 2013, 12:36:23 AM |
|
Your having the same problem I was with orphans using hakabanes code. If you like we can connect our two pool together with my code to see if the orphans problem goes away? ...good job though BTW, I found that you have to delete the data/digitalcoin folder between certain code changes. Maybe that was part of your problem.
|
|
|
|
Decagrog
|
|
June 03, 2013, 05:51:50 AM |
|
Your having the same problem I was with orphans using hakabanes code. If you like we can connect our two pool together with my code to see if the orphans problem goes away? ...good job though BTW, I found that you have to delete the data/digitalcoin folder between certain code changes. Maybe that was part of your problem. Thanks CartmanSPC , I've added your pool to the boostrap_addr (is dgc.xpool.net right? ) let's see if the orphan rate drop
|
|
|
|
CartmanSPC
Legendary
Offline
Activity: 1270
Merit: 1000
|
|
June 03, 2013, 05:56:05 AM |
|
Your having the same problem I was with orphans using hakabanes code. If you like we can connect our two pool together with my code to see if the orphans problem goes away? ...good job though BTW, I found that you have to delete the data/digitalcoin folder between certain code changes. Maybe that was part of your problem. Thanks CartmanSPC , I've added your pool to the boostrap_addr (is dgc.xpool.net right? ) let's see if the orphan rate drop There's more to it than that but lets move this to PM's.
|
|
|
|
eroxors
Legendary
Offline
Activity: 924
Merit: 1000
Think. Positive. Thoughts.
|
|
June 11, 2013, 07:24:55 PM |
|
When I try to compile devcoin, it says make: *** No rule to make target 'bitcoind'. Stop.
Any ideas? I followed instructions accurately.
|
|
|
|
|