ZenMiner (unmoderated) service discussion thread

[AR15usr]

OK I switched pools and it seems better now, about 0.6%.

Yes I’m seeing a 40% reject rate!

Make sure that the pool has vardiff. If the diff is not at the right level you will see a lot of rejects.

[alienesb]

Has anyone tried a more powerful brick to see if the temp makes it less melty?

[crackfoo]

I've been told by support that my gridseed's (5 chips) should work... seems not to show up for me....

anyone try them yet?

[zenMiner_Eric]

I've been told by support that my gridseed's (5 chips) should work... seems not to show up for me....

anyone try them yet?

@crackfoo, stand by on the gridseeds... The developers are refining the configs for them and hope to push them out today or early tomorrow. As soon as you see the gridseed option in the dropdown, you'll be good to go. Sorry for the delay.

[crackfoo]

I've been told by support that my gridseed's (5 chips) should work... seems not to show up for me....

anyone try them yet?

@crackfoo, stand by on the gridseeds... The developers are refining the configs for them and hope to push them out today or early tomorrow. As soon as you see the gridseed option in the dropdown, you'll be good to go. Sorry for the delay.

sounds good. thanks

A big feature now would be the ability to mine separate pools with separate hardware devices.

Thanks!

[AR15usr]

Seem to be getting a high discarded shares rate on my Fury:

Accepted: 898
Rejected: 11
Discarded: 592

[zenMiner_Eric]

Seem to be getting a high discarded shares rate on my Fury:

Accepted: 898
Rejected: 11
Discarded: 592

Many zenMiner users are reporting the same, however, all have confirmed that pool stats (i.e. real stats) are typically much closer to what you'd expect them to be. We're actively working on refining the detail of the statistics provided in the zenOS UI.

[crackfoo]

Will the zenMiner eventually accept non scrypt devices too?

[schnauzr]

Many zenMiner users are reporting the same, however, all have confirmed that pool stats (i.e. real stats) are typically much closer to what you'd expect them to be. We're actively working on refining the detail of the statistics provided in the zenOS UI.

What does the discarded number actually mean?  I realize that the no-submit-stale is NOT being used, so if all shares are being sent to the pool, what is being discarded and where?  By the way after about a half a day of running Furys, my accepts are 1862 and my discards are 2902.

[ktmracing03]

Looks like the UI has been upgraded a bit! It now contains pool results (Accepted Shares/Rejected Shares/Discarded/Stale/Diff1 Work/Get Failures/Remote Failures) on the Miner screen.

It's a start in the right direction.

Must be nice....my sd card in my zenminer came with the NOOBS image. I have spent the last 6 hours trying to get this "plug and play" system set up. After a couple of hours I was able to get the image from GAW, so far I am not impressed as no one even knows the user name and password for the image. I was able to figure it out but still cannot get my miner to register with the code. Is anyone else having any issues like this?

....and now after dealing with zensupport all day they simply handed the issue off to GAW saying its the responsibility of GAW not theirs. Makes sense since this is a Zenminer Controller 

As previously mentioned in our emails exchanged, we support the hardware and the service. But the configuration is specific to each retailer. In this case, GAW provided the wrong image by mistake. I apoligize for the inconvenience, but I am sure that GAW Miners will do whatever it takes to make it right. Once you receive your new properly configured unit, I assure you I will support its connectivity to our service til the day its last hash is calculated.

I understand GAW may have made the mistake, but I have now lost 7 hours of mining time with this "plug and play" system so you can understand my frustration.

I certainly do understand... As a miner myself, I prevent downtime at all costs... But sometimes that means a creative solution while I work out my preferred method I know that doesn't make things right at this very moment, but I will forward this information to GAW as well to further assist you in getting a replacement unit.

I am trying to be creative, unfortunately I dont have an additional pc to run my new miner on, and I am not proficient enough to setup linux on my pi.

Well I am happy to report that after much headache and many emails with Eric I am up and running with my Zenminer. Just want to publicly thank Eric for the support and understanding. I am looking forward to the continued service and future updates from zenminer.
thanks

[zenMiner_Eric]

Well I am happy to report that after much headache and many emails with Eric I am up and running with my Zenminer. Just want to publicly thank Eric for the support and understanding. I am looking forward to the continued service and future updates from zenminer.
thanks

Thanks, @ktmracing03, I really appreciate the recognition. Glad we were able to sort it out.

[AR15usr]

Just noticed the additional data on the miner screen. Very nice.

Is it possible to report the units temp?

[schnauzr]

Just noticed the additional data on the miner screen. Very nice.

Is it possible to report the units temp?

Which browser are you using?  The display got messed up (not showing anything anymore) under Chrome within the last hour, where it has worked fine for the last day, even logging out and back in multiple times.  I tried IE for the hell of it and i now see all the nice statistics.

[AR15usr]

Just noticed the additional data on the miner screen. Very nice.

Is it possible to report the units temp?

Which browser are you using?  The display got messed up (not showing anything anymore) under Chrome within the last hour, where it has worked fine for the last day, even logging out and back in multiple times.  I tried IE for the hell of it and i now see all the nice statistics.

Safari. It did get messed up for me too, but logging out and back in fixed it.

[joshahouck]

Simply refreshing the page updated the data to report correctly.

[robmob]

I am using this code with different pool but I have two miners one using com4 and one using com5 how do I add the other miner ?

cgminer.exe -o stratum+tcp://us.clevermining.com:3333 -u 1KQxLLQNxgn2upd4TtGbtiRdm3f5UWC9k8 -p x --nocheck-golden --chips-count 128 --ltc-clk 328 -S //./COM4

[crackfoo]

I am using this code with different pool but I have two miners one using com4 and one using com5 how do I add the other miner ?

cgminer.exe -o stratum+tcp://us.clevermining.com:3333 -u 1GjFfPB89W43uDa1dT4Uy8WGwW4HwYK4QQ -p x --nocheck-golden --chips-count 128 --ltc-clk 328 -S //./COM4

cgminer.exe -o stratum+tcp://us.clevermining.com:3333 -u 1GjFfPB89W43uDa1dT4Uy8WGwW4HwYK4QQ -p x --nocheck-golden --chips-count 128 --ltc-clk 328 -S //./COM4 -S //./COM5

[robmob]

I am using this code with different pool but I have two miners one using com4 and one using com5 how do I add the other miner ?

cgminer.exe -o stratum+tcp://us.clevermining.com:3333 -u 1GjFfPB89W43uDa1dT4Uy8WGwW4HwYK4QQ -p x --nocheck-golden --chips-count 128 --ltc-clk 328 -S //./COM4

cgminer.exe -o stratum+tcp://us.clevermining.com:3333 -u 1GjFfPB89W43uDa1dT4Uy8WGwW4HwYK4QQ -p x --nocheck-golden --chips-count 128 --ltc-clk 328 -S //./COM4 -S //./COM5

Thanks for your help that worked fine.

[AR15usr]

@zenminer_eric, is it possible to add our machines Temp to the screen?

[kebabman]

Is Eric the sole zenMiner support guy?