[XC][XCurrency] Decentralised Trustless Privacy Platform / Encrypted XChat / Pos

[thewarners777]

Never a dull moment in XC land.


This weekend we are looking to test out the XC Multipool.

We need SHA256, scrypt and X11 miners for testing the backend.


If your interested in testing - head over to http://www.hashevolved.com/ to get started.  


We may need to restart the pool at times for updates, your miners should automatically reconnect when we do.


thanks,

ATCSECURE

WooHoo now I can point my gridseeds to this pool...

Getting CRAZY ammounts of unconfirmed shares for scrypt using my gridseeds.

me, too.  I wonder if it's just that the pool is very small right now and it's taking a long time to find blox.  Also, I noticed that the diff is jumping around quite a bit, from 512 to 4096 and everywhere inbetween.  I don't mind the granularity of a high diff, but I would like it to settle down.

I've got a 7mh/s gridseed garden.

Me too... Only getting 600kh with them right now because of the failures. I would point my GPU farm at the pool but im mining another coin to pump and dump for XC.

[almond]

Never a dull moment in XC land.


This weekend we are looking to test out the XC Multipool.

We need SHA256, scrypt and X11 miners for testing the backend.


If your interested in testing - head over to http://www.hashevolved.com/ to get started.  


We may need to restart the pool at times for updates, your miners should automatically reconnect when we do.


thanks,

ATCSECURE

WooHoo now I can point my gridseeds to this pool...

Getting CRAZY ammounts of unconfirmed shares for scrypt using my gridseeds.

me, too.  I wonder if it's just that the pool is very small right now and it's taking a long time to find blox.  Also, I noticed that the diff is jumping around quite a bit, from 512 to 4096 and everywhere inbetween.  I don't mind the granularity of a high diff, but I would like it to settle down.

I've got a 7mh/s gridseed garden.

Me too... Only getting 600kh with them right now because of the failures. I would point my GPU farm at the pool but im mining another coin to pump and dump for XC.

coinking has a similar problem with gridseeds.  In IRC, the ops said they were going to have their system gridseed compatible sometime this week.  They said that the problem is somehow related to the way their vardiff difficulty was setup.  I imagine it's the same thing here.

[philipvdlinde]

Is there any ETA on the xnode usb devices? Since I really would like to buy one.

[synechist]

Is there any ETA on the xnode usb devices? Since I really would like to buy one.

We're sorting through ways to sell the TOR Stick. Whichever way it ends up happening, it'll be shipped at the Rev. 3 release date.

[policymaker]

I am getting

UNCONFIRMED SHARES
50308
shares with no blocks found

as well, I guess its because of beta?

[CrazyLeoW]

Is there any ETA on the xnode usb devices? Since I really would like to buy one.

We're sorting through ways to sell the TOR Stick. Whichever way it ends up happening, it'll be shipped at the Rev. 3 release date.

Could I purchase the stick with XC coin?

[almond]

I am getting

UNCONFIRMED SHARES
50308
shares with no blocks found

as well, I guess its because of beta?

all the shares are unconfirmed.  x11, sha-256, and scrypt.  Is it because we haven't found any blocks yet ?

[five8andten]

my 1.5mh is clipping along just fine.  20k accepted shares already!!!

EDIT:  I should say that my miners aren't getting rejected shares

[synechist]

Is there any ETA on the xnode usb devices? Since I really would like to buy one.

We're sorting through ways to sell the TOR Stick. Whichever way it ends up happening, it'll be shipped at the Rev. 3 release date.

Could I purchase the stick with XC coin?

That's the idea, though there's also good reason for people to save their XC and spend other currencies. :-)

[thewarners777]

my 1.5mh is clipping along just fine.  20k accepted shares already!!!

EDIT:  I should say that my miners aren't getting rejected shares

are you running asic?

[philipvdlinde]

Is there any ETA on the xnode usb devices? Since I really would like to buy one.

We're sorting through ways to sell the TOR Stick. Whichever way it ends up happening, it'll be shipped at the Rev. 3 release date.

Could I purchase the stick with XC coin?

That's the idea, though there's also good reason for people to save their XC and spend other currencies. :-)

I am willing to spend euros on it because I really want to keep my XC.

[bitcad4u]

Never a dull moment in XC land.


This weekend we are looking to test out the XC Multipool.

We need SHA256, scrypt and X11 miners for testing the backend.


If your interested in testing - head over to http://www.hashevolved.com/ to get started.  


We may need to restart the pool at times for updates, your miners should automatically reconnect when we do.


thanks,

ATCSECURE

Hey , ATC - I will be moving 2400KHs here. Thx

Im trying to connect my nvidia x11 there but its getting failed, can any1 confirm that its not working right now? Will mine with 2,5-3MH x11 in multi!

X11 is working, did you connect to the X11 port? stratum+tcp://stratum.hashevolved.com:5555 for X11

Hello - I have not turned my miner on since about this time last year - I was mining LTC before anyone knew about LTC... anyway so now I am trying to get into X11 mining and so I see I need sgminer...so I got that downloaded and connected to the pool but my cards say they are running at like 16- 17 khs instead of 600khs I was getting on scrypt.  Also lots of rejects - uhmm...so what am I doing wrong?   My cards areSapphire HD 7950s (4 of them) thx.

[bitcad4u]

Never a dull moment in XC land.


This weekend we are looking to test out the XC Multipool.

We need SHA256, scrypt and X11 miners for testing the backend.


If your interested in testing - head over to http://www.hashevolved.com/ to get started.  


We may need to restart the pool at times for updates, your miners should automatically reconnect when we do.


thanks,

ATCSECURE

Hey , ATC - I will be moving 2400KHs here. Thx

Im trying to connect my nvidia x11 there but its getting failed, can any1 confirm that its not working right now? Will mine with 2,5-3MH x11 in multi!

X11 is working, did you connect to the X11 port? stratum+tcp://stratum.hashevolved.com:5555 for X11

Hello - I have not turned my miner on since about this time last year - I was mining LTC before anyone knew about LTC... anyway so now I am trying to get into X11 mining and so I see I need sgminer...so I got that downloaded and connected to the pool but my cards say they are running at like 16- 17 khs instead of 600khs I was getting on scrypt.  Also lots of rejects - uhmm...so what am I doing wrong?   My cards areSapphire HD 7950s (4 of them) thx.

BTW my cards are runnign fine on this pool with scrypt.. but they run damn hot and so I hear x11 runs cooler and uses less power right ?

[pratico]

x11 40% less power/heat over scrypt.

[policymaker]

Never a dull moment in XC land.


This weekend we are looking to test out the XC Multipool.

We need SHA256, scrypt and X11 miners for testing the backend.


If your interested in testing - head over to http://www.hashevolved.com/ to get started.  


We may need to restart the pool at times for updates, your miners should automatically reconnect when we do.


thanks,

ATCSECURE

Hey , ATC - I will be moving 2400KHs here. Thx

Im trying to connect my nvidia x11 there but its getting failed, can any1 confirm that its not working right now? Will mine with 2,5-3MH x11 in multi!

X11 is working, did you connect to the X11 port? stratum+tcp://stratum.hashevolved.com:5555 for X11

Hello - I have not turned my miner on since about this time last year - I was mining LTC before anyone knew about LTC... anyway so now I am trying to get into X11 mining and so I see I need sgminer...so I got that downloaded and connected to the pool but my cards say they are running at like 16- 17 khs instead of 600khs I was getting on scrypt.  Also lots of rejects - uhmm...so what am I doing wrong?   My cards areSapphire HD 7950s (4 of them) thx.

BTW my cards are runnign fine on this pool with scrypt.. but they run damn hot and so I hear x11 runs cooler and uses less power right ?

download the latest sgminer and search for ur cards specific settings, setting ur .bat for ur cards should be easy, although there are certain lines that are really important, along with ur -i  intensity. You also have to specify the -darkcoin algo

[atcsecure]

I am getting

UNCONFIRMED SHARES
50308
shares with no blocks found

as well, I guess its because of beta?

Is this what you are seeing on the miner or the website?


Also I use BAMT for mining GPU mining rig's.  I have 7970's and get about 2Mh each - I use 1051Mhz/1500Mhz and found that to be best for these cards, granted I'm sure you could tweak it more...


I'm not seeing any issues or rejects -

GPU 0: 2.1 / 1.8 Mh/s | A:1488  R:2  HW:0  U:0.95/m  I:13  xI:0  rI:0
73.0 C  F: 84% (3242 RPM)  E: 1051 MHz  M: 1500 Mhz  V: 1.175V  A: 99%  P: 0%
Last initialised: [2014-06-26 14:51:21]
Thread 0: 1.0 Mh/s Enabled ALIVE
Thread 1: 1.0 Mh/s Enabled ALIVE

GPU 1: 2.1 / 1.8 Mh/s | A:1447  R:4  HW:0  U:0.93/m  I:13  xI:0  rI:0
73.0 C  F: 68% (2654 RPM)  E: 1051 MHz  M: 1500 Mhz  V: 1.175V  A: 99%  P: 0%
Last initialised: [2014-06-26 14:51:21]
Thread 2: 1.0 Mh/s Enabled ALIVE
Thread 3: 1.0 Mh/s Enabled ALIVE

GPU 2: 2.1 / 1.8 Mh/s | A:1518  R:1  HW:0  U:0.97/m  I:13  xI:0  rI:0
73.0 C  F: 77% (2907 RPM)  E: 1051 MHz  M: 1500 Mhz  V: 1.175V  A: 99%  P: 0%
Last initialised: [2014-06-26 14:51:21]
Thread 4: 1.0 Mh/s Enabled ALIVE
Thread 5: 1.0 Mh/s Enabled ALIVE

GPU 3: 2.1 / 1.8 Mh/s | A:1445  R:3  HW:0  U:0.93/m  I:13  xI:0  rI:0
67.0 C  F: 50% (2026 RPM)  E: 1051 MHz  M: 1500 Mhz  V: 1.175V  A: 99%  P: 0%
Last initialised: [2014-06-26 14:51:21]
Thread 6: 1.0 Mh/s Enabled ALIVE
Thread 7: 1.0 Mh/s Enabled ALIVE

[thewarners777]

Never a dull moment in XC land.


This weekend we are looking to test out the XC Multipool.

We need SHA256, scrypt and X11 miners for testing the backend.


If your interested in testing - head over to http://www.hashevolved.com/ to get started.  


We may need to restart the pool at times for updates, your miners should automatically reconnect when we do.


thanks,

ATCSECURE

Hey , ATC - I will be moving 2400KHs here. Thx

Im trying to connect my nvidia x11 there but its getting failed, can any1 confirm that its not working right now? Will mine with 2,5-3MH x11 in multi!

X11 is working, did you connect to the X11 port? stratum+tcp://stratum.hashevolved.com:5555 for X11

Hello - I have not turned my miner on since about this time last year - I was mining LTC before anyone knew about LTC... anyway so now I am trying to get into X11 mining and so I see I need sgminer...so I got that downloaded and connected to the pool but my cards say they are running at like 16- 17 khs instead of 600khs I was getting on scrypt.  Also lots of rejects - uhmm...so what am I doing wrong?   My cards areSapphire HD 7950s (4 of them) thx.

BTW my cards are runnign fine on this pool with scrypt.. but they run damn hot and so I hear x11 runs cooler and uses less power right ?

X11 with graphics cards is the way to go... Mine run 50% cooler with X11 and the hash rate is tripled.

[donnyd413]

Is there an instruction sheet available?

What rig are you running?  GPU card?  What OS?  I got mine pointed over there pretty quickly.  

windows w/geforce gt 430 GC.

[tr8kr]

I put 4x 280x on it about 12.5Mh/s

[peb0t]

The multipool is a very good new to XC.

Thanks dev