[XC][XCurrency] Decentralised Trustless Privacy Platform / Encrypted XChat / Pos

[atcsecure]

I put 4x 280x on it about 12.5Mh/s

whats your config? the 7970's are the same as the 280x, I'm seeing about on average 8Mh/s

[SuperSta]

the multipool does not like asics... I get so many unconfirmed shares.

Unconfirmed shares aren't a bad thing. Everyone starts off with unconfirmed shares. When blocks are found for each coin, your unconfirmed shares turn into confirmed shares. At the end of each shift, you will receive a payout based on how many confirmed shares you have.

If you leave the pool and you still have unconfirmed shares in our system, they might still turn confirmed later, and guess what, you'll be paid for them.

So yeah unconfirmed shares are good thing to have, but ideally, confirmed shares are what you're looking for.

Sorry I guess this is my fault. I'll updated FAQs.

[mojun7982]

I put 4x 280x on it about 12.5Mh/s

whats your config? the 7970's are the same as the 280x, I'm seeing about on average 8Mh/s

7970's on 8Mh/s? whats your config?

[conradjohnson]

m8 dont get me wrong, but, buying 6 750ti to mine scrypt is like buying a mini cooper and going off road. Let the pool take its due, 5,5MH for 6 750ti seems low, my 660ti gets up to 2MHZ on latest CC miner alone, and I know for a fact that one 750ti can get better than that, while running cooler and not needing so much watt.

Were I you, I would definitely hit the cudaminer thread, you totally need to finetune your cards if u dont get more than 10MH.


TL:DR 750ti has the best MH/watt/investment ratio for x11, you need better settings

No offense taken, but I think your analogy is all off:  It's like buying a monster truck and never taking it off road... or buying a race car and only driving it to starbucks. 

Getting 10.5 Mhs now on the x11.  If I'm using ccminer, would I still hit up the cudaminer thread to do some tuning?

[tr8kr]

I put 4x 280x on it about 12.5Mh/s

whats your config? the 7970's are the same as the 280x, I'm seeing about on average 8Mh/s

I use a optimized mod of sgminer with the last AMD driver

GPU_MAX_ALLOC_PERCENT 100
sgminer -k x11mod -o stratum+tcp://stratum.hashevolved.com:5555 -u (XC adress) -p x -I 18 -g 2 --lookup-gap 2 -w 256 --thread-concurrency 8192

But right now i see accepted job in my miner with no reject but the frontend of the pool tell me 59233 rejected share and 0 accepted.

Unconfirmed shares aren't a bad thing. Everyone starts off with unconfirmed shares. When blocks are found for each coin, your unconfirmed shares turn into confirmed shares. At the end of each shift, you will receive a payout based on how many confirmed shares you have.

If you leave the pool and you still have unconfirmed shares in our system, they might still turn confirmed later, and guess what, you'll be paid for them.

So yeah unconfirmed shares are good thing to have, but ideally, confirmed shares are what you're looking for.

Sorry I guess this is my fault. I'll updated FAQs.

Ok i understand !

[conradjohnson]

But right now i see accepted job in my miner with no reject but the frontend of the pool tell me 59233 rejected share and 0 accepted.

I'm also seeing on the site, 0 confirmed (in x11) but 236536 unconfirmed.

[SuperSta]

I put 4x 280x on it about 12.5Mh/s

whats your config? the 7970's are the same as the 280x, I'm seeing about on average 8Mh/s

I use a optimized mod of sgminer with the last AMD driver

GPU_MAX_ALLOC_PERCENT 100
sgminer -k x11mod -o stratum+tcp://stratum.hashevolved.com:5555 -u (XC adress) -p x -I 18 -g 2 --lookup-gap 2 -w 256 --thread-concurrency 8192

But right now i see accepted job in my miner with no reject but the frontend of the pool tell me 59233 rejected share and 0 accepted.

There isn't an accepted/rejected stat on the pool

[almond]

I put 4x 280x on it about 12.5Mh/s

whats your config? the 7970's are the same as the 280x, I'm seeing about on average 8Mh/s

I get 2.7mh/s x11 per 280x toxic using pimp (sigh) & the x11 mod algo: I 13 1150 engine 1600 mem

[luqas0891]

0   
   stratum+tcp://stratum.hashevolved.com:5555
   48.0 c   99%   2749 Kh/s   60 / 0   0.00%   200 Series   70% (3026)   1170 Mhz   1200 Mhz   
1   
   stratum+tcp://stratum.hashevolved.com:5555
   50.0 c   99%   2609 Kh/s   45 / 0   0.00%   200 Series   70% (2913)   1100 Mhz   1200 Mhz   
2   
   stratum+tcp://stratum.hashevolved.com:5555
   51.0 c   99%   2755 Kh/s   51 / 0   0.00%   200 Series   70% (3104)   1170 Mhz   1200 Mhz   
3   
   stratum+tcp://stratum.hashevolved.com:5555
   46.0 c   99%   2713 Kh/s   38 / 0   0.00%   200 Series   70% (2828)   1150 Mhz   1200 Mhz   
4   
   stratum+tcp://stratum.hashevolved.com:5555
   43.0 c   99%   2715 Kh/s   43 / 0   0.00%   200 Series   70% (2724)   1150 Mhz   1200 Mhz   

all 270x
0,2 gigabyte
1,3,4 saphire

[laredo7mm]

0   
   stratum+tcp://stratum.hashevolved.com:5555
   48.0 c   99%   2749 Kh/s   60 / 0   0.00%   200 Series   70% (3026)   1170 Mhz   1200 Mhz   
1   
   stratum+tcp://stratum.hashevolved.com:5555
   50.0 c   99%   2609 Kh/s   45 / 0   0.00%   200 Series   70% (2913)   1100 Mhz   1200 Mhz   
2   
   stratum+tcp://stratum.hashevolved.com:5555
   51.0 c   99%   2755 Kh/s   51 / 0   0.00%   200 Series   70% (3104)   1170 Mhz   1200 Mhz   
3   
   stratum+tcp://stratum.hashevolved.com:5555
   46.0 c   99%   2713 Kh/s   38 / 0   0.00%   200 Series   70% (2828)   1150 Mhz   1200 Mhz   
4   
   stratum+tcp://stratum.hashevolved.com:5555
   43.0 c   99%   2715 Kh/s   43 / 0   0.00%   200 Series   70% (2724)   1150 Mhz   1200 Mhz   

all 270x
0,2 gigabyte
1,3,4 saphire

Your rig would be quieter if you didn't force your fans to 70%.   

[luqas0891]

I know but excavator stands in an unused room so I do not mind a desire to be better cooled card
and self multipool is another great idea
Bullseye by me, Ladies and Gentlemen

[atcsecure]

I put 4x 280x on it about 12.5Mh/s

whats your config? the 7970's are the same as the 280x, I'm seeing about on average 8Mh/s

I get 2.7mh/s x11 per 280x toxic using pimp (sigh) & the x11 mod algo: I 13 1150 engine 1600 mem

ah I see why >>>> 1150/1600

[qawzsx]

Vote for XC to be supported on this new auction website - http://cryptomart.co

[laredo7mm]

Vote for XC to be supported on this new auction website - http://cryptomart.co

Why do you keep spamming this on this thread and other threads?

[laredo7mm]

I know but excavator stands in an unused room so I do not mind a desire to be better cooled card
and self multipool is another great idea
Bullseye by me, Ladies and Gentlemen

A cooler card at the expense of extra wear and tear on your fans.  Anything less than 75°C for card temp is fine.

When I was mining XC (during PoW) with my 280x's they would stay at 50 to 60°C and the fan was at around 30 to 35%.

[qawzsx]

Vote for XC to be supported on this new auction website - http://cryptomart.co

Why do you keep spamming this on this thread and other threads?

I can't believe you just asked that question...

[laredo7mm]

Vote for XC to be supported on this new auction website - http://cryptomart.co

Why do you keep spamming this on this thread and other threads?

I can't believe you just asked that question...

You better believe, because I did.

Every day here for the past three days, plus you spammed it on Dark and Veri, so you aren't just trying to promote XC adoption.

[policymaker]

m8 dont get me wrong, but, buying 6 750ti to mine scrypt is like buying a mini cooper and going off road. Let the pool take its due, 5,5MH for 6 750ti seems low, my 660ti gets up to 2MHZ on latest CC miner alone, and I know for a fact that one 750ti can get better than that, while running cooler and not needing so much watt.

Were I you, I would definitely hit the cudaminer thread, you totally need to finetune your cards if u dont get more than 10MH.


TL:DR 750ti has the best MH/watt/investment ratio for x11, you need better settings

No offense taken, but I think your analogy is all off:  It's like buying a monster truck and never taking it off road... or buying a race car and only driving it to starbucks. 

Getting 10.5 Mhs now on the x11.  If I'm using ccminer, would I still hit up the cudaminer thread to do some tuning?

well yeah, that was a better analogy, but u got the point

And yeah, you do need to visit the cudaminer topic or google for ur cards settings, you can certainly do better than that

[five8andten]

my 1.5mh is clipping along just fine.  20k accepted shares already!!!

EDIT:  I should say that my miners aren't getting rejected shares

are you running asic?

gridseeds

[tr8kr]

We need a estimated XC payout on the new multipool pool... i know i dont mine for nothing but i like to see a progress on my mining