ocminer
Legendary
Offline
Activity: 2674
Merit: 1240
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 08:57:56 PM |
|
I cant get any of my AMD cards to submit accepted work. My 780Ti is purring right along, but Sgminer doesnt seem to be doing anything
I posted the Nvidia Miner in the post above for you. Make sure to use the -k x13mod flag with sgminer to ensure you are using the correct kernel (this is the X13 kernel used by sgminer). I hope this helps! yes I am using that flag, all I keep getting is Stratum from pool detected new block, then diff changes then stratum from pool detected new block etc I have 4 MH/s of power on my AMD cards, but nothing. I have 2 R7 265's and an HD 5850 and I can't get any accepted shares off of any of them. They run X11, Scrypt-N, NIST5, Scrypt, Cryptnote all fine, but I can't get anything out of X13 What pool are you running on? If you are see Stratum Detected New Block you should be receiving shares at that pool, I would recommend contacting the pool dev to make sure it isn't something on their end, the network looks to be running stable and my small CPU miner is picking up shares. Techcoin's network hashrate is running at 16 GH per sec. I have tried Suchpool and Suprnova, let me try a coupl emore Hmm did you have any problems on suprnova ? Maybe we should look together ? Currently I dont see any problems, my rigs are also hashing away nicely. I cant get any of my R7 265's or my HD 5850 to get any accepted shares. They work fine on X11, Scrypt-N, Nist5, Scrypt, Cryptnote etc but not on X13. Yeah nothing on your pool either. Not from the start ? X13 is basically exactly the same like X11, just with two algos added. Your settings should be the same like with X11.. Simply switch to X13 and it should be ok. Is it throwing HW errors ?
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
Grifftech2k4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 08:59:46 PM |
|
I cant get any of my AMD cards to submit accepted work. My 780Ti is purring right along, but Sgminer doesnt seem to be doing anything
I posted the Nvidia Miner in the post above for you. Make sure to use the -k x13mod flag with sgminer to ensure you are using the correct kernel (this is the X13 kernel used by sgminer). I hope this helps! yes I am using that flag, all I keep getting is Stratum from pool detected new block, then diff changes then stratum from pool detected new block etc I have 4 MH/s of power on my AMD cards, but nothing. I have 2 R7 265's and an HD 5850 and I can't get any accepted shares off of any of them. They run X11, Scrypt-N, NIST5, Scrypt, Cryptnote all fine, but I can't get anything out of X13 What pool are you running on? If you are see Stratum Detected New Block you should be receiving shares at that pool, I would recommend contacting the pool dev to make sure it isn't something on their end, the network looks to be running stable and my small CPU miner is picking up shares. Techcoin's network hashrate is running at 16 GH per sec. I have tried Suchpool and Suprnova, let me try a coupl emore Hmm did you have any problems on suprnova ? Maybe we should look together ? Currently I dont see any problems, my rigs are also hashing away nicely. I cant get any of my R7 265's or my HD 5850 to get any accepted shares. They work fine on X11, Scrypt-N, Nist5, Scrypt, Cryptnote etc but not on X13. Yeah nothing on your pool either. Not from the start ? X13 is basically exactly the same like X11, just with two algos added. Your settings should be the same like with X11.. Simply switch to X13 and it should be ok. Is it throwing HW errors ? No HW errors.
|
|
|
|
Grifftech2k4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 09:01:42 PM |
|
How do I use BFGMiner? I cant seem to get it to work. Wanted to try it instead of SGminer
|
|
|
|
ocminer
Legendary
Offline
Activity: 2674
Merit: 1240
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 09:02:29 PM |
|
How do I use BFGMiner? I cant seem to get it to work. Wanted to try it instead of SGminer
I use sgminer (for nvidia) and never had any issues...
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
animalroam
Legendary
Offline
Activity: 1073
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 09:04:01 PM |
|
Faucet is being worked on at the moment by CryptoArrow.
|
|
|
|
Grifftech2k4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 09:07:06 PM |
|
This is my .bat file
sgminer -k x13mod -I 15 -o stratum+tcp://tech.suprnova.cc:7779 -u xxxxx -p xxxxxxx
|
|
|
|
ocminer
Legendary
Offline
Activity: 2674
Merit: 1240
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 09:07:49 PM |
|
This is my .bat file
sgminer -k x13mod -I 15 -o stratum+tcp://tech.suprnova.cc:7779 -u xxxxx -p xxxxxxx
looks good !
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
Grifftech2k4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 09:08:14 PM |
|
How do I use BFGMiner? I cant seem to get it to work. Wanted to try it instead of SGminer
I use sgminer (for nvidia) and never had any issues... I use ccminer for Nvidia and that works great, but SGminer for AMD on X13 is not getting me anything.
|
|
|
|
Grifftech2k4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 09:09:26 PM |
|
This is my .bat file
sgminer -k x13mod -I 15 -o stratum+tcp://tech.suprnova.cc:7779 -u xxxxx -p xxxxxxx
looks good ! Not sure what it is then ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
fonzerrellie
Legendary
Offline
Activity: 1190
Merit: 1000
Kaspa
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 09:13:18 PM |
|
I cant get any of my AMD cards to submit accepted work. My 780Ti is purring right along, but Sgminer doesnt seem to be doing anything
I posted the Nvidia Miner in the post above for you. Make sure to use the -k x13mod flag with sgminer to ensure you are using the correct kernel (this is the X13 kernel used by sgminer). I hope this helps! yes I am using that flag, all I keep getting is Stratum from pool detected new block, then diff changes then stratum from pool detected new block etc I have 4 MH/s of power on my AMD cards, but nothing. I have 2 R7 265's and an HD 5850 and I can't get any accepted shares off of any of them. They run X11, Scrypt-N, NIST5, Scrypt, Cryptnote all fine, but I can't get anything out of X13 What pool are you running on? If you are see Stratum Detected New Block you should be receiving shares at that pool, I would recommend contacting the pool dev to make sure it isn't something on their end, the network looks to be running stable and my small CPU miner is picking up shares. Techcoin's network hashrate is running at 16 GH per sec. I have tried Suchpool and Suprnova, let me try a coupl emore Hmm did you have any problems on suprnova ? Maybe we should look together ? Currently I dont see any problems, my rigs are also hashing away nicely. I cant get any of my R7 265's or my HD 5850 to get any accepted shares. They work fine on X11, Scrypt-N, Nist5, Scrypt, Cryptnote etc but not on X13. Yeah nothing on your pool either. Not from the start ? X13 is basically exactly the same like X11, just with two algos added. Your settings should be the same like with X11.. Simply switch to X13 and it should be ok. Is it throwing HW errors ? make sure your kernal say's "-k x13modold" it's what I needed to do to get my old 6950 hashing X13 correctly
|
#Expanse $EXP 500 transactions 4 .1 EXP 1st Clone of ETH WAVES
|
|
|
Grifftech2k4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 09:19:44 PM |
|
I cant get any of my AMD cards to submit accepted work. My 780Ti is purring right along, but Sgminer doesnt seem to be doing anything
I posted the Nvidia Miner in the post above for you. Make sure to use the -k x13mod flag with sgminer to ensure you are using the correct kernel (this is the X13 kernel used by sgminer). I hope this helps! yes I am using that flag, all I keep getting is Stratum from pool detected new block, then diff changes then stratum from pool detected new block etc I have 4 MH/s of power on my AMD cards, but nothing. I have 2 R7 265's and an HD 5850 and I can't get any accepted shares off of any of them. They run X11, Scrypt-N, NIST5, Scrypt, Cryptnote all fine, but I can't get anything out of X13 What pool are you running on? If you are see Stratum Detected New Block you should be receiving shares at that pool, I would recommend contacting the pool dev to make sure it isn't something on their end, the network looks to be running stable and my small CPU miner is picking up shares. Techcoin's network hashrate is running at 16 GH per sec. I have tried Suchpool and Suprnova, let me try a coupl emore Hmm did you have any problems on suprnova ? Maybe we should look together ? Currently I dont see any problems, my rigs are also hashing away nicely. I cant get any of my R7 265's or my HD 5850 to get any accepted shares. They work fine on X11, Scrypt-N, Nist5, Scrypt, Cryptnote etc but not on X13. Yeah nothing on your pool either. Not from the start ? X13 is basically exactly the same like X11, just with two algos added. Your settings should be the same like with X11.. Simply switch to X13 and it should be ok. Is it throwing HW errors ? make sure your kernal say's "-k x13modold" it's what I needed to do to get my old 6950 hashing X13 correctly No go on that, thanks for the tip though.
|
|
|
|
ocminer
Legendary
Offline
Activity: 2674
Merit: 1240
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 09:30:43 PM |
|
I cant get any of my AMD cards to submit accepted work. My 780Ti is purring right along, but Sgminer doesnt seem to be doing anything
I posted the Nvidia Miner in the post above for you. Make sure to use the -k x13mod flag with sgminer to ensure you are using the correct kernel (this is the X13 kernel used by sgminer). I hope this helps! yes I am using that flag, all I keep getting is Stratum from pool detected new block, then diff changes then stratum from pool detected new block etc I have 4 MH/s of power on my AMD cards, but nothing. I have 2 R7 265's and an HD 5850 and I can't get any accepted shares off of any of them. They run X11, Scrypt-N, NIST5, Scrypt, Cryptnote all fine, but I can't get anything out of X13 What pool are you running on? If you are see Stratum Detected New Block you should be receiving shares at that pool, I would recommend contacting the pool dev to make sure it isn't something on their end, the network looks to be running stable and my small CPU miner is picking up shares. Techcoin's network hashrate is running at 16 GH per sec. I have tried Suchpool and Suprnova, let me try a coupl emore Hmm did you have any problems on suprnova ? Maybe we should look together ? Currently I dont see any problems, my rigs are also hashing away nicely. I cant get any of my R7 265's or my HD 5850 to get any accepted shares. They work fine on X11, Scrypt-N, Nist5, Scrypt, Cryptnote etc but not on X13. Yeah nothing on your pool either. Not from the start ? X13 is basically exactly the same like X11, just with two algos added. Your settings should be the same like with X11.. Simply switch to X13 and it should be ok. Is it throwing HW errors ? make sure your kernal say's "-k x13modold" it's what I needed to do to get my old 6950 hashing X13 correctly No go on that, thanks for the tip though. Or you can try this one: https://github.com/tsiv/ccminer-cryptonight
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
|
|
Invest4al
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 121
Merit: 100
Follow on twitter @invest4al
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 09:58:00 PM |
|
Reaching the dev on IRC and having a block explorer is +1 in my book. Following this coin!
|
|
|
|
HardwarePal
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 10:05:32 PM Last edit: June 24, 2014, 10:47:16 PM by HardwarePal |
|
OCminer your unified login doesnt accept my new pin while "your normal pools" work fine.
I have been driving you crazy with this all day but I cant withdraw my coins.
|
|
|
|
powersup
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 10:07:16 PM |
|
Reaching the dev on IRC and having a block explorer is +1 in my book. Following this coin!
+1, this coin looking very good!
|
|
|
|
louiseth1
Legendary
Offline
Activity: 924
Merit: 1000
Bitfarms.io
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 10:08:46 PM |
|
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fsuchpool.pw%2Fsuchpool-small.png&t=665&c=JlWN2obgN-lr8Q)
http://suchpool.pw/tech
Spread some hashes our way! First pool up for Techcoin
1 account and 1 set of workers for all pools on our new interface Multiple Load-Balanced Node.JS Stratums + VARDIFF 24/7 Monitoring on Stratum, MPOS, Central Wallet, Mysql and much more Helpdesk Support System, Active team DDoS Protected and Flood filtered 10 Dedicated Servers in Cluster Professionnal infrastructure build with scalability in mind with our own servers Multiple databases and frequent full database dumps Hosted in a state of the art Datacenter using n+1 Best bandwidth carriers, excellent connectivity and latency worldwide We also have our own on-site tech support, since we are the hosters.
We recently implemented single login across all our new pools. We are also migrating some of our old pools on the platform aswell. Come see and benefit from our improved front-end and stronger back-end architecture!
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FTYrPt2W.png&t=665&c=9N4QUHYC3wSnEg)
http://suchpool.pw/tech To reach us:
URL: http://www.suchpool.pw Email: admin@suchpool.pw IRC: irc.freenode.net - #suchpool Twitter: @SuchPool Support: Support.SuchPool.pw
|
Bitfarms.io - Powering Blockchains with Sustainable Energy
|
|
|
louiseth1
Legendary
Offline
Activity: 924
Merit: 1000
Bitfarms.io
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 10:10:24 PM |
|
I have tried Suchpool and Suprnova, let me try a coupl emore
Hashing goes nicely on SuchPool. If you have any help we have irc, twitter, support panel and e-mail. Don't hesitate to drop us a line if any problem occur, we are ALWAYS there.
|
Bitfarms.io - Powering Blockchains with Sustainable Energy
|
|
|
KeyserSozeMC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 10:31:10 PM |
|
I've mined 35 coins so far. 150MH/s, ~6 hours.. ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Pain in the ass!
|
Hey, smexy. Don't waste your time. Time's precious.
|
|
|
|