[ANN] Techcoin [TECH] [186,985 PoW coins 4% PoS] [BITTREX] [ALLCOIN]

[ocminer]

I cant get any of my AMD cards to submit accepted work. My 780Ti is purring right along, but Sgminer doesnt seem to be doing anything

I posted the Nvidia Miner in the post above for you.

Make sure to use the -k x13mod flag with sgminer to ensure you are using the correct kernel (this is the X13 kernel used by sgminer).

I hope this helps!

yes I am using that flag, all I keep getting is Stratum from pool detected new block, then diff changes then stratum from pool detected new block etc

I have 4 MH/s of power on my AMD cards, but nothing.

I have 2 R7 265's and an HD 5850 and I can't get any accepted shares off of any of them. They run X11, Scrypt-N, NIST5, Scrypt, Cryptnote all fine, but I can't get anything out of X13

What pool are you running on? If you are see Stratum Detected New Block you should be receiving shares at that pool, I would recommend contacting the pool dev to make sure it isn't something on their end, the network looks to be running stable and my small CPU miner is picking up shares.

Techcoin's network hashrate is running at 16 GH per sec.

I have tried Suchpool and Suprnova, let me try a coupl emore

Hmm did you have any problems on suprnova ? Maybe we should look together ? Currently I dont see any problems, my rigs are also hashing away nicely.

I cant get any of my R7 265's or my HD 5850 to get any accepted shares. They work fine on X11, Scrypt-N, Nist5, Scrypt, Cryptnote etc but not on X13. Yeah nothing on your pool either.

Not from the start ?

X13 is basically exactly the same like X11, just with two algos added.

Your settings should be the same like with X11.. Simply switch to X13 and it should be ok. Is it throwing HW errors ?

[Grifftech2k4]

I cant get any of my AMD cards to submit accepted work. My 780Ti is purring right along, but Sgminer doesnt seem to be doing anything

I posted the Nvidia Miner in the post above for you.

Make sure to use the -k x13mod flag with sgminer to ensure you are using the correct kernel (this is the X13 kernel used by sgminer).

I hope this helps!

yes I am using that flag, all I keep getting is Stratum from pool detected new block, then diff changes then stratum from pool detected new block etc

I have 4 MH/s of power on my AMD cards, but nothing.

I have 2 R7 265's and an HD 5850 and I can't get any accepted shares off of any of them. They run X11, Scrypt-N, NIST5, Scrypt, Cryptnote all fine, but I can't get anything out of X13

What pool are you running on? If you are see Stratum Detected New Block you should be receiving shares at that pool, I would recommend contacting the pool dev to make sure it isn't something on their end, the network looks to be running stable and my small CPU miner is picking up shares.

Techcoin's network hashrate is running at 16 GH per sec.

I have tried Suchpool and Suprnova, let me try a coupl emore

Hmm did you have any problems on suprnova ? Maybe we should look together ? Currently I dont see any problems, my rigs are also hashing away nicely.

I cant get any of my R7 265's or my HD 5850 to get any accepted shares. They work fine on X11, Scrypt-N, Nist5, Scrypt, Cryptnote etc but not on X13. Yeah nothing on your pool either.

Not from the start ?

X13 is basically exactly the same like X11, just with two algos added.

Your settings should be the same like with X11.. Simply switch to X13 and it should be ok. Is it throwing HW errors ?

No HW errors.

[Grifftech2k4]

How do I use BFGMiner? I cant seem to get it to work. Wanted to try it instead of SGminer

[ocminer]

How do I use BFGMiner? I cant seem to get it to work. Wanted to try it instead of SGminer

I use sgminer (for nvidia) and never had any issues...

[animalroam]

Faucet is being worked on at the moment by CryptoArrow.

[Grifftech2k4]

This is my .bat file

sgminer -k x13mod -I 15 -o stratum+tcp://tech.suprnova.cc:7779 -u xxxxx -p xxxxxxx

[ocminer]

This is my .bat file

sgminer -k x13mod -I 15 -o stratum+tcp://tech.suprnova.cc:7779 -u xxxxx -p xxxxxxx

looks good !

[Grifftech2k4]

How do I use BFGMiner? I cant seem to get it to work. Wanted to try it instead of SGminer

I use sgminer (for nvidia) and never had any issues...

I use ccminer for Nvidia and that works great, but SGminer for AMD on X13 is not getting me anything.

[Grifftech2k4]

This is my .bat file

sgminer -k x13mod -I 15 -o stratum+tcp://tech.suprnova.cc:7779 -u xxxxx -p xxxxxxx

looks good !

Not sure what it is then

[fonzerrellie]

I cant get any of my AMD cards to submit accepted work. My 780Ti is purring right along, but Sgminer doesnt seem to be doing anything

I posted the Nvidia Miner in the post above for you.

Make sure to use the -k x13mod flag with sgminer to ensure you are using the correct kernel (this is the X13 kernel used by sgminer).

I hope this helps!

yes I am using that flag, all I keep getting is Stratum from pool detected new block, then diff changes then stratum from pool detected new block etc

I have 4 MH/s of power on my AMD cards, but nothing.

I have 2 R7 265's and an HD 5850 and I can't get any accepted shares off of any of them. They run X11, Scrypt-N, NIST5, Scrypt, Cryptnote all fine, but I can't get anything out of X13

What pool are you running on? If you are see Stratum Detected New Block you should be receiving shares at that pool, I would recommend contacting the pool dev to make sure it isn't something on their end, the network looks to be running stable and my small CPU miner is picking up shares.

Techcoin's network hashrate is running at 16 GH per sec.

I have tried Suchpool and Suprnova, let me try a coupl emore

Hmm did you have any problems on suprnova ? Maybe we should look together ? Currently I dont see any problems, my rigs are also hashing away nicely.

I cant get any of my R7 265's or my HD 5850 to get any accepted shares. They work fine on X11, Scrypt-N, Nist5, Scrypt, Cryptnote etc but not on X13. Yeah nothing on your pool either.

Not from the start ?

X13 is basically exactly the same like X11, just with two algos added.

Your settings should be the same like with X11.. Simply switch to X13 and it should be ok. Is it throwing HW errors ?

make sure your kernal say's "-k x13modold"  it's what I needed to do to get my old 6950 hashing X13 correctly

[Grifftech2k4]

I cant get any of my AMD cards to submit accepted work. My 780Ti is purring right along, but Sgminer doesnt seem to be doing anything

I posted the Nvidia Miner in the post above for you.

Make sure to use the -k x13mod flag with sgminer to ensure you are using the correct kernel (this is the X13 kernel used by sgminer).

I hope this helps!

yes I am using that flag, all I keep getting is Stratum from pool detected new block, then diff changes then stratum from pool detected new block etc

I have 4 MH/s of power on my AMD cards, but nothing.

I have 2 R7 265's and an HD 5850 and I can't get any accepted shares off of any of them. They run X11, Scrypt-N, NIST5, Scrypt, Cryptnote all fine, but I can't get anything out of X13

What pool are you running on? If you are see Stratum Detected New Block you should be receiving shares at that pool, I would recommend contacting the pool dev to make sure it isn't something on their end, the network looks to be running stable and my small CPU miner is picking up shares.

Techcoin's network hashrate is running at 16 GH per sec.

I have tried Suchpool and Suprnova, let me try a coupl emore

Hmm did you have any problems on suprnova ? Maybe we should look together ? Currently I dont see any problems, my rigs are also hashing away nicely.

I cant get any of my R7 265's or my HD 5850 to get any accepted shares. They work fine on X11, Scrypt-N, Nist5, Scrypt, Cryptnote etc but not on X13. Yeah nothing on your pool either.

Not from the start ?

X13 is basically exactly the same like X11, just with two algos added.

Your settings should be the same like with X11.. Simply switch to X13 and it should be ok. Is it throwing HW errors ?

make sure your kernal say's "-k x13modold"  it's what I needed to do to get my old 6950 hashing X13 correctly

No go on that, thanks for the tip though.

[ocminer]

I cant get any of my AMD cards to submit accepted work. My 780Ti is purring right along, but Sgminer doesnt seem to be doing anything

I posted the Nvidia Miner in the post above for you.

Make sure to use the -k x13mod flag with sgminer to ensure you are using the correct kernel (this is the X13 kernel used by sgminer).

I hope this helps!

yes I am using that flag, all I keep getting is Stratum from pool detected new block, then diff changes then stratum from pool detected new block etc

I have 4 MH/s of power on my AMD cards, but nothing.

I have 2 R7 265's and an HD 5850 and I can't get any accepted shares off of any of them. They run X11, Scrypt-N, NIST5, Scrypt, Cryptnote all fine, but I can't get anything out of X13

What pool are you running on? If you are see Stratum Detected New Block you should be receiving shares at that pool, I would recommend contacting the pool dev to make sure it isn't something on their end, the network looks to be running stable and my small CPU miner is picking up shares.

Techcoin's network hashrate is running at 16 GH per sec.

I have tried Suchpool and Suprnova, let me try a coupl emore

Hmm did you have any problems on suprnova ? Maybe we should look together ? Currently I dont see any problems, my rigs are also hashing away nicely.

I cant get any of my R7 265's or my HD 5850 to get any accepted shares. They work fine on X11, Scrypt-N, Nist5, Scrypt, Cryptnote etc but not on X13. Yeah nothing on your pool either.

Not from the start ?

X13 is basically exactly the same like X11, just with two algos added.

Your settings should be the same like with X11.. Simply switch to X13 and it should be ok. Is it throwing HW errors ?

make sure your kernal say's "-k x13modold"  it's what I needed to do to get my old 6950 hashing X13 correctly

No go on that, thanks for the tip though.

Or you can try this one:


https://github.com/tsiv/ccminer-cryptonight

[ceobotpoland]

try this:

https://www.dropbox.com/s/sodbzky1e3p2d32/sgminer_x11x13mod_03_06_2014.zip

https://bitcointalk.org/index.php?topic=623409.0

for my gpu HDD 5830 and 6870 i use this:

set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=1
sgminer -k x13modold -o stratum+tcp://xxx -u xxx.yyy -p x -w 128 -d 1 -I 18

[thevampireskilledit]

Following this coin.

[Invest4al]

 Reaching the dev on IRC and having a block explorer is +1 in my book. Following this coin!

[HardwarePal]

OCminer your unified login doesnt accept my new pin while "your normal pools" work fine.

I have been driving you crazy with this all day but I cant withdraw my coins.

[powersup]

Reaching the dev on IRC and having a block explorer is +1 in my book. Following this coin!

+1, this coin looking very good!

[louiseth1]

http://suchpool.pw/tech

Spread some hashes our way! First pool up for Techcoin


1 account and 1 set of workers for all pools on our new interface
Multiple Load-Balanced Node.JS Stratums + VARDIFF
24/7 Monitoring on Stratum, MPOS, Central Wallet, Mysql and much more
Helpdesk Support System, Active team
DDoS Protected and Flood filtered
10 Dedicated Servers in Cluster
Professionnal infrastructure build with scalability in mind with our own servers
Multiple databases and frequent full database dumps
Hosted in a state of the art Datacenter using n+1
Best bandwidth carriers, excellent connectivity and latency worldwide
We also have our own on-site tech support, since we are the hosters.

We recently implemented single login across all our new pools. We are also migrating some of our old pools on the platform aswell.
Come see and benefit from our improved front-end and stronger back-end architecture!



http://suchpool.pw/tech
To reach us:

    URL: http://www.suchpool.pw
    Email: admin@suchpool.pw
    IRC: irc.freenode.net - #suchpool
    Twitter: @SuchPool
    Support: Support.SuchPool.pw

[louiseth1]

I have tried Suchpool and Suprnova, let me try a coupl emore

Hashing goes nicely on SuchPool.

If you have any help we have irc, twitter, support panel and e-mail. Don't hesitate to drop us a line if any problem occur, we are ALWAYS there.

[KeyserSozeMC]

I've mined 35 coins so far. 150MH/s, ~6 hours..

Pain in the ass!