mattimann
|
|
November 17, 2017, 01:34:41 PM |
|
I have the same Problem. Since 2 Day´s only Orphane Blocks. Also my NavPi is showing some wrong Balance, but my QT Wallet shows the correct Balance. Any Idea´s are appreciated.
I should mention that i have a sufficient Balance and that i´m staking since a year. Usually i receive 4-8 Stakes a day.
OK, the stakes are catching up today. Newertheless my NavPi shows the wrong Balance. Any NavPi Pro´s here? Should i just import a new backup of my Wallet? *** Before running a repair wallet, make sure to have a backup. *** Is your balance not correct or did a transaction stay unconfirmed? You might need to repair your wallet so your wallet will rescan the blockchain. Open the Terminal or connect through SSH. Type the following into the console to stop the Nav Coin daemon (the Core Client without the graphical user interface running on the Pi): "./navcoin-4.0.6/bin/navcoin-cli -datadir=/home/stakebox/.navcoin4 stop" and press *enter*. Wait a minute for the daemon to shut down. Type the following to start the daemon again with the parameter to clear all transactions (confirmed and unconfirmed) and scan the blockchain for all confirmed transactions again: "./navcoin-4.0.6/bin/navcoind -zapwallettxes=2 " and press *enter*. Be patient and wait some time. After that you can connect to the WebUI again and the correct balance should be displayed. https://navtechservers.com/tutorials/written-tutorials/Many Thanks for your help Mate. I received this: EXCEPTION: St9bad_alloc std::bad_alloc navcoin in ProcessMessages() It Did´nt work. Still showing the wrong Balance, although the "get total Balance" Button shows the correct one. I think i simply set this whole thing up again... I changed the command for repair wallet. First make sure your navcoind process is not running anymore. 1. Open the Terminal or connect through SSH. 2. Type the following into the console to stop the Nav Coin daemon (the Core Client without the graphical user interface running on the Pi): "./navcoin-4.0.6/bin/navcoin-cli -datadir=/home/stakebox/.navcoin4 stop" and press *enter*. 3. Wait a minute for the daemon to shut down. 4. Type the following to start the daemon again with the parameter to clear all transactions (confirmed and unconfirmed) and scan the blockchain for all confirmed transactions again: "sudo -u www-data ./navcoin-4.0.6/bin/navcoind -datadir=/home/stakebox/.navcoin4 -zapwallettxes" and press *enter*. 5. Be patient and wait some time. After that you can connect to the WebUI again and the correct balance should be displayed. Grat! Awesome! Thank you. It looks good now. I really apreciate your effort.
|
|
|
|
colvano
|
|
November 17, 2017, 04:10:44 PM |
|
I changed the command for repair wallet. First make sure your navcoind process is not running anymore.
1. Open the Terminal or connect through SSH. 2. Type the following into the console to stop the Nav Coin daemon (the Core Client without the graphical user interface running on the Pi): "./navcoin-4.0.6/bin/navcoin-cli -datadir=/home/stakebox/.navcoin4 stop" and press *enter*. 3. Wait a minute for the daemon to shut down. 4. Type the following to start the daemon again with the parameter to clear all transactions (confirmed and unconfirmed) and scan the blockchain for all confirmed transactions again: "sudo -u www-data ./navcoin-4.0.6/bin/navcoind -datadir=/home/stakebox/.navcoin4 -zapwallettxes" and press *enter*. 5. Be patient and wait some time. After that you can connect to the WebUI again and the correct balance should be displayed.
Grat! Awesome! Thank you. It looks good now. I really apreciate your effort. You are very welcome! I am glad it worked
|
|
|
|
maad
Newbie
Offline
Activity: 18
Merit: 0
|
|
November 18, 2017, 12:16:37 PM |
|
Hi there, I'm looking for more information on how to control Navcoin wallet using command line (navcoin-cli). To be more specific - I intend to run Navcoin Core on remote Ubuntu system and connect to it using SSH. The most important functions for me are: 1. How to enable wallet for staking? 2. How to check wallet status: if it is staking, and what is remaining time to reward? Alternatively if it is easy maybe someone could let me know how to enable Web UI for Navcoin Core running on Ubuntu. I've already checked tutorials provided here: https://navtechservers.com/tutorials/written-tutorials/but all I could find is remote usage by Web UI on Raspberry and no information on how to run using cli or how to enable Web UI on other platforms then Raspberry. Regards
|
|
|
|
maad
Newbie
Offline
Activity: 18
Merit: 0
|
|
November 19, 2017, 04:15:02 PM |
|
...
2. (How to check if it is staking, and what is remaining time to reward?) This is easy, it is a standard common rpc command: navcoin-cli getstakinginfo
...
Thx for info I've tried "navcoin-cli getstakinginfo" and got following error: error: Could not locate RPC credentials. No authentication cookie could be found, and no rpcpassword is set in the configuration file ... So I did some search on how to setup rpcpassword and found more then that. In theory following config should give me all I need: rpcuser= rpcpassword= rpcport=44444 port=44440 listen=1 daemon=1 txindex=1 staking=1 Problem is I've benn waiting over a week to get reward and still got 2 days left to get it so don't want to restart it now but as soon as I get my reward I will restart wallet using cli and give my results here, maybe it will be useful for someone. Regards
|
|
|
|
|
colvano
|
|
November 20, 2017, 12:24:30 AM |
|
...
2. (How to check if it is staking, and what is remaining time to reward?) This is easy, it is a standard common rpc command: navcoin-cli getstakinginfo
...
Thx for info I've tried "navcoin-cli getstakinginfo" and got following error: error: Could not locate RPC credentials. No authentication cookie could be found, and no rpcpassword is set in the configuration file ... So I did some search on how to setup rpcpassword and found more then that. In theory following config should give me all I need: rpcuser= rpcpassword= rpcport=44444 port=44440 listen=1 daemon=1 txindex=1 staking=1 Problem is I've benn waiting over a week to get reward and still got 2 days left to get it so don't want to restart it now but as soon as I get my reward I will restart wallet using cli and give my results here, maybe it will be useful for someone. Regards Try: ./navcoin-4.0.6/bin/navcoin-cli getstakereport
|
|
|
|
Kirilp
|
|
November 20, 2017, 11:22:07 AM |
|
Quick Update On The Community Vote And NetworkHi everyone! Just a very quick Monday update from the team. It’s been a busy few weeks with the team involved in lots of planning/strategy sessions – but we’ve noticed some confusion around the community vote & a few other items, so we thought we’d give you a quick update. Update on the community vote: - The vote was originally set to last for 4 weeks, which is why it will show the vote as ‘ended’ in your wallet. However, the votes are still being counted on the network.We will extend the voting period for another 8 weeks. We will be updating the Community Fund Vote page to reflect this, but do realise that there may be some confusion because the wallet will continue to say that they vote has ended. This will be addressed in the next wallet update. - Part of the reason why we are extending the vote is that we’ve just had another 1.5 million coins update to the latest wallet version and are voting yes. With over 73% of blocks voting yes in the last 1000 blocks we are getting VERY close to our target, and without needing to change the rules of the vote. - We have been very hesitant about changing the rules of the vote mid-way through the voting period. There was lots of support from the community about excluding old wallets from the vote – but because this rule wasn’t outlined before the vote, it walks a fine line between ‘doing what the community wants’ versus ‘changing the rules to get what we want’. We want this vote to be seen as fair, and without intervention – hence our hesitation around changing the rules. - So TL/DR: The Community Vote is being extended for another 8 weeks We are very close to getting the 75% required (73.8% in last 1000 blocks). https://navcoin.org/news/quick-update-on-the-community-vote-and-network/?utm_content=buffer2f5d1&utm_medium=social&utm_source=twitter.com&utm_campaign=buffer
|
|
|
|
The1crypto
Member
Offline
Activity: 112
Merit: 10
|
|
November 20, 2017, 12:21:15 PM |
|
What's the vote for?
|
|
|
|
trackmaster
Member
Offline
Activity: 84
Merit: 12
|
|
November 20, 2017, 02:14:12 PM |
|
Quick Update On The Community Vote And NetworkHi everyone! Just a very quick Monday update from the team. It’s been a busy few weeks with the team involved in lots of planning/strategy sessions – but we’ve noticed some confusion around the community vote & a few other items, so we thought we’d give you a quick update. Update on the community vote: - The vote was originally set to last for 4 weeks, which is why it will show the vote as ‘ended’ in your wallet. However, the votes are still being counted on the network.We will extend the voting period for another 8 weeks. We will be updating the Community Fund Vote page to reflect this, but do realise that there may be some confusion because the wallet will continue to say that they vote has ended. This will be addressed in the next wallet update. - Part of the reason why we are extending the vote is that we’ve just had another 1.5 million coins update to the latest wallet version and are voting yes. With over 73% of blocks voting yes in the last 1000 blocks we are getting VERY close to our target, and without needing to change the rules of the vote. - We have been very hesitant about changing the rules of the vote mid-way through the voting period. There was lots of support from the community about excluding old wallets from the vote – but because this rule wasn’t outlined before the vote, it walks a fine line between ‘doing what the community wants’ versus ‘changing the rules to get what we want’. We want this vote to be seen as fair, and without intervention – hence our hesitation around changing the rules. - So TL/DR: The Community Vote is being extended for another 8 weeks We are very close to getting the 75% required (73.8% in last 1000 blocks). https://navcoin.org/news/quick-update-on-the-community-vote-and-network/?utm_content=buffer2f5d1&utm_medium=social&utm_source=twitter.com&utm_campaign=buffer Thank you for the update. Everything will work its way out. I would like to put some thought into getting a NAV-USDT market for many of us who have way too much in USDT now and would like to move more into NAV. I personally do not have full confidence in tether, but have been able to use this market to sell much higher than btc prices for other coins. Having a Nav option would only help add to the overall volume invested in Nav. So many times in the past it was easy to help move Nav prices in btc, but the buy order books are too low. Trading in Nav-USDT may not be a big market for now, but having so much money in tether is an uneasy feeling. Any other opinions are welcome for sure. For me it would help out and the amount of money in the USDT market has grown tremendously due to the early bitcoin buyers taking out small amounts of their profits while prices are high, but looking for other options to invest in with limited options.
|
|
|
|
Borin
|
|
November 20, 2017, 03:11:55 PM |
|
@Pakage @Hashforce @Remy @Juguelio
Are you millionaires now? I sold my pack of navs for xxk usd, now I regret my decision. In 2015 I had 1kk+ navs ;(
|
|
|
|
legendx87
Newbie
Offline
Activity: 21
Merit: 0
|
|
November 20, 2017, 05:34:12 PM |
|
ALL COINS UP ..... WHY NAV STAY PRICE IN 0.85 TO WHEN >>>> DEV
|
|
|
|
maad
Newbie
Offline
Activity: 18
Merit: 0
|
|
November 20, 2017, 06:14:47 PM |
|
Try:
./navcoin-4.0.6/bin/navcoin-cli getstakereport
It works now, thanks for help. In case someone would need it - in order to enable staking remotely you need to use: ./navcoin-cli walletpassphrase YOUR_PASSWD UNLOCK_TIME_IN_SEC true
|
|
|
|
jmxcursi
Newbie
Offline
Activity: 42
Merit: 0
|
|
November 21, 2017, 12:32:38 AM |
|
We added NAV Coin to the Cheddur app ( https://www.cheddur.com/)! This will allow new users to learn about NAV Coin and join the community. Cheddur allows you to link wallets, exchanges, and other services that support NAV so that new users can easily get started. You can also review the project and post your NAV addresses on your profile to receive tips / payments / donations in NAV from other users Can others from the community please review the profile for quality and help me add supported services? The more active the NAV Coin profile is (via user reviews and addresses), the higher it ranks in search results and the more likely newcomers are to discover the NAV Coin project! Screenshots: https://imgur.com/a/lUKkMhttps://i.imgur.com/39axtKH.png
|
|
|
|
mattimann
|
|
November 21, 2017, 07:14:11 PM |
|
Good sign to see some Trolls here. In January the Price was what? around 3 cents? And today? After a Pump to nearly 2 Dollars, it´s consolidating at around 80-85 cents. For me its nearly 30fold! Trolls keep trolling... they have no way
|
|
|
|
dr_ropata
Jr. Member
Offline
Activity: 36
Merit: 56
|
|
November 22, 2017, 08:11:54 AM |
|
|
|
|
|
Aquazi
|
|
November 25, 2017, 09:26:05 AM |
|
It's time we get some e-shop to accept Navcoin.
Let's be honest, nobody's trading Nav for goods. It doesn't even exchanges for fiat, almost exclusively bitcoin.
I like the idea of helping the devs, but Nav's a working product and we should do something to spread adoption.
|
|
|
|
temadanilevsky
Member
Offline
Activity: 250
Merit: 28
|
|
November 26, 2017, 11:24:58 AM |
|
Good day! Looking forward to joining @UPbitExchange !
|
|
|
|
Gatorelf
|
|
November 26, 2017, 12:31:59 PM |
|
Good day! Looking forward to joining @UPbitExchange !
yes lot of good developments going on back in for a good while
|
|
|
|
jackandrew
Member
Offline
Activity: 140
Merit: 10
Highest ROI crypto infrastructure
|
|
November 26, 2017, 02:47:36 PM |
|
The NAV coins is having a good day indeed. Just checked the coinmarket and there is 33% grow for the last 24 hours, not bat at all. I agree, we need to spread the word about its project, this will help all of us to protect investments.
|
|
|
|
bribed
|
|
November 26, 2017, 02:49:44 PM |
|
NAV coin is great. I think this coin has a huge growth potential. Good to see it gaining a little in the last days. I bought some on Bittrex some time ago, but never tried to send a transaction actually. Can someone tell me how fast transactions are with NAV? Also what advantages does NAV have compared to other anonymous coins such as Monero or AEON?
|
|
|
|
|