[CLOSED]Minion Chip Assembly GB

[sorehammer]

post a pic of the hexa page so I can compare settings

[1714144102]

1714144102

[1714144102]

1714144102

[1714144102]

1714144102

[1714144102]

1714144102

[1714144102]

1714144102

[macher]

post a pic of the hexa page so I can compare settings

http://www.udrevaka.net/technobit_hexm_problem3.png
http://www.udrevaka.net/technobit_hexm_problem4.png

ntp off
dhcp off
ip static
ssh on

[sorehammer]

that 15 should be 255 chap

[macher]

that 15 should be 255 chap

I changed it to 255, reboot and no change. After 2min got again zombie :-(

btw, I dont change this default values... use this http://technobit.eu/0_3_9.rar

[sorehammer]

what psu you using

[macher]

what psu you using

Platimax 1500W EPM1500EGT

http://www.enermax.com/home.php?fn=eng/product_a1_1_2&lv0=1&lv1=52&no=191

now just one minion to that power supply

[sorehammer]

if you want we can try team view

[sorehammer]

Just wanted to give a big thank you to Marto, my new PSU came in and im up and hashing at 400gh/s connected to my router. (Thanks Marto i apprecaite it)

Great news chap

[dogjunior]

Just wanted to give a big thank you to Marto, my new PSU came in and im up and hashing at 400gh/s connected to my router. (Thanks Marto i apprecaite it)

A ray of hope for those waiting. I wish I had my miners so that I could put it all behind me. I know I won't ROI but just having the miners is a comfort. I remain positive and send out good karma to Marto and Bob.

[marto74]

post a pic of the hexa page so I can compare settings

ntp off
dhcp off
ip static
ssh on

Care to give me TW access.
I'll try to help

[Zich]

that 15 should be 255 chap

Some info regarding enable & disable chips:

The setting use binary numbering.
1 represent enable
0 represent disable

Example:

Chips numbering   ==> 7654 3210       Decimal
all chips enable    ==> 0000 1111         15   or
                               1111 1111        255

all chips disable   ==> 0000 0000          0     

chip 3 disable      ==> 0000 0111         7    

chip 2 disable      ==> 0000 1011         11  

chip 1 disable      ==> 0000 1101         13  

chip 0 disable      ==> 0000 1110         14  

chip 0 & 1 disable ==> 0000 1100         12


Since there is only 4 chips available so 15 also work  

[sorehammer]

Just going on what works in mine

[Zich]

what psu you using

Platimax 1500W EPM1500EGT

http://www.enermax.com/home.php?fn=eng/product_a1_1_2&lv0=1&lv1=52&no=191

now just one minion to that power supply

That's it, your PSU is very powerful but not single rail. Your PSU had six rails, each rail only can deliver 30A max.
Using default setting the board will use up to 40A(i guess since i don't own one  )

To prove this you can try to disable 1 chip & see if the board can reach 300G
You can see more detail on cgminer api log.

[Mariowot]

any idea whats wrong?

after start it is minig about 2min, than its stop and blinking red.

You might aswell have wrong atached coolers to the board, i did have the same problem  at the begining

[sorehammer]

what psu you using

Platimax 1500W EPM1500EGT

http://www.enermax.com/home.php?fn=eng/product_a1_1_2&lv0=1&lv1=52&no=191

now just one minion to that power supply

That's it, your PSU is very powerful but not single rail. Your PSU had six rails, each rail only can deliver 30A max.
Using default setting the board will use up to 40A(i guess since i don't own one  )

To prove this you can try to disable 1 chip & see if the board can reach 300G
You can see more detail on cgminer api log.

I'm using a psu with 36a on the 12v rails and it works fine.

[Zich]

what psu you using

Platimax 1500W EPM1500EGT

http://www.enermax.com/home.php?fn=eng/product_a1_1_2&lv0=1&lv1=52&no=191

now just one minion to that power supply

That's it, your PSU is very powerful but not single rail. Your PSU had six rails, each rail only can deliver 30A max.
Using default setting the board will use up to 40A(i guess since i don't own one  )

To prove this you can try to disable 1 chip & see if the board can reach 300G
You can see more detail on cgminer api log.

I'm using a psu with 36a on the 12v rails and it works fine.

Of course it work. based on 2GOOD review at default setting it will use about 430 watt.
Your PSU can deliver 36 A x 12 V = 432 watt.
macher PSU 30 A x 12 V = 360 watt, the psu overload protection should already kick in.

[sorehammer]

That would explain it then

[Zich]

That would explain it then

Maybe, since i didn't consider what Mariowot said about cooler 

[btmtb]

I received mine late yesterday afternoon but other than a cursory look I've not had chance to set them up. Anyone had any joy with alternative coolers yet? I noticed the steel brackets, but they're obviously a million miles different from my Intel 1150 coolers, I'll have to have a proper play later tonight.

[Mariowot]

I received mine late yesterday afternoon but other than a cursory look I've not had chance to set them up. Anyone had any joy with alternative coolers yet? I noticed the steel brackets, but they're obviously a million miles different from my Intel 1150 coolers, I'll have to have a proper play later tonight.

Arctic freezer rev.2 fits perfect on the steel bracket.