|
Lima99 (OP)
|
|
July 28, 2014, 08:55:21 PM |
|
Anyway to have features from other coin for this one, like anon and co?
Currently if you have the tor browser running on your computer then you can go to Settings>Options Click on the netowrk tab Place a check on "Connect through SOCKS proxy" change the Port to 9150 and leave the defualt 127.0.0.1 for the proxy IP save the settings and re-launch your wallet client. Now everytime your wallet starts it will connect via the Tor network as long as you have the tor browser running. Other features will be added in the future.
|
|
|
|
Lima99 (OP)
|
|
July 28, 2014, 08:59:47 PM |
|
Why would my wallet, which has been OPEN and mining PoS for some time now, suddenly be Out of Synch with the network? It has been like this for several (more than 6) hours and it doesn't seem to be catching up. This has happened on two wallets on different machines? Very confusing There was an mandatory upgrade that was needed in order to stop the checkpoint to old warning and also to provide more stability to the coin. Not every one upgraded in time so the coin forked. You may be one of the ones that are on the non-official fork. Please follow the steps listed here to get back on the correct fork. https://bitcointalk.org/index.php?topic=683450.msg7966986#msg7966986
|
|
|
|
Lima99 (OP)
|
|
July 28, 2014, 09:18:55 PM |
|
I noticed this coin and it's ultra low difficulty and thought it would be fun to solo for a bit. One problem I see is apparently this coin has been ultra low difficulty for too long, and the planned effect of moore's law + high power ASICs never really happened. So there is a limit of 100 million coins, but nearly 73 million have already been mined. At the rate coins are coming out at this difficulty, that limit of 100 million will be hit fast. Unless this can quickly skyrocket to a multi-gigahash network and stay there, I don't see how this will not require a fork to increase the total number of coins or reduce the reward, most likely a combination of both.
yes that is currect, I been trying to advertice the coin as much as posible. But please note when every one is back on the correct official fork and their wallet start minting there would be less and less PoW blocks as the PoS block will take their place. So the money supply should continue to slow down. Prior to the fork most of the mining was done via PoS. Currently only a small amount of PoS block are being minted, but that is because the age of the blocks needs to be about 9-10 days before they start minting so with in the next few days more and more wallets will start minting. Also I'm hoping for a more stable pool than the one we currently have as that will also get more and more people to start mining the coin when they start leaning about it. But for this every one needs to spread the word.
|
|
|
|
Lima99 (OP)
|
|
July 28, 2014, 09:22:49 PM |
|
Thank You for setting up this pool Every please provide your feed back regarding this pool. OP will be updated.
|
|
|
|
CryptoSkills
Full Member
Offline
Activity: 126
Merit: 100
BitCoin, webdesign and coding.
|
|
July 28, 2014, 09:31:09 PM |
|
How many confirmations needed to confirm blocks?
|
|
|
|
Bonez58
Newbie
Offline
Activity: 33
Merit: 0
|
|
July 28, 2014, 10:01:29 PM |
|
If I am not mistaken, 120 confirmations required.
|
|
|
|
Bonez58
Newbie
Offline
Activity: 33
Merit: 0
|
|
July 28, 2014, 10:12:41 PM |
|
Why would my wallet, which has been OPEN and mining PoS for some time now, suddenly be Out of Synch with the network? It has been like this for several (more than 6) hours and it doesn't seem to be catching up. This has happened on two wallets on different machines? Very confusing There was an mandatory upgrade that was needed in order to stop the checkpoint to old warning and also to provide more stability to the coin. Not every one upgraded in time so the coin forked. You may be one of the ones that are on the non-official fork. Please follow the steps listed here to get back on the correct fork. https://bitcointalk.org/index.php?topic=683450.msg7966986#msg7966986Yup, I have followed that thread already. I don't know how to paste a screenshot here, so . . . The debug window says I am running v 1.3.0.0-git-CPTL, Build date 7/24/14. Only 2 connections.
|
|
|
|
Lima99 (OP)
|
|
July 28, 2014, 11:25:58 PM Last edit: July 28, 2014, 11:48:25 PM by Lima99 |
|
How many confirmations needed to confirm blocks?
120 for new Blocks 6 for transation Can you please confirm that you are on the correct fork, please double check that you are at the same height as the block explorer. http://capitalcoin.minepools.net:12570/chain/CapitalCoin
|
|
|
|
Lima99 (OP)
|
|
July 28, 2014, 11:35:53 PM Last edit: July 29, 2014, 11:11:47 PM by Lima99 |
|
Why would my wallet, which has been OPEN and mining PoS for some time now, suddenly be Out of Synch with the network? It has been like this for several (more than 6) hours and it doesn't seem to be catching up. This has happened on two wallets on different machines? Very confusing There was an mandatory upgrade that was needed in order to stop the checkpoint to old warning and also to provide more stability to the coin. Not every one upgraded in time so the coin forked. You may be one of the ones that are on the non-official fork. Please follow the steps listed here to get back on the correct fork. https://bitcointalk.org/index.php?topic=683450.msg7966986#msg7966986Yup, I have followed that thread already. I don't know how to paste a screenshot here, so . . . The debug window says I am running v 1.3.0.0-git-CPTL, Build date 7/24/14. Only 2 connections. yes that is the updated client, just to confirm in your debug log for IRC do you have Join "CapitalCoin00 or CapitalCoin01"? At what block are you stuck at, see if they are increaing event if very slow. if it's not try replacing your part of the CapitalCoin.conf with the following. noirc=1 maxconnections=100 connect=31.220.51.2 addnode=174.102.229.22 addnode=196.215.115.167 addnode=50.197.11.193 addnode=70.72.139.214 addnode=76.30.45.16 addnode=79.133.151.7 addnode=81.106.120.65 addnode=86.94.218.41 addnode=99.37.3.51
the Top one says connect and it's pointing to the block explorer. That should get you conencted. My client has 4 connections and the block explorer has 9
|
|
|
|
AlexAce420
Member
Offline
Activity: 155
Merit: 10
|
|
July 29, 2014, 01:27:14 AM |
|
THE FIRST 10 MINERS WILL GET FREE CPTL WHEN THE FIRST BLOCK WILL BE FOUND! ONLY 0.5% FEE!!!
Low 0.5% fees!! High performance Node.js backend User friendly mining client Multi-coin Pool 24/7 Support No registration needed! Point your miners to our pool, set your own address and start getting payout every 20 seconds! EU based DDOS protected Under constant improvements for your mining pleasure! Why choose a NOMP pool? 1) It's Safer than a normal Pool. Cause you do not need to give any personal info such email or passwords.
2) It's faster: point your miners, set your address in your miner config and earn coind immediately with auto payouts every 30 seconds!
3) It's lighter for your internet connection than normal MPOS pool.
Are you still waiting to mine on http://pools.cryptoskills.com/ ?? Quick Guide how to mine on CRYPTOSKILLS POOLS (without even entering the website!!)
Configuration:
Username: your CapitalCoin wallet address
Password: anything (could be a letter or number or whatever you want)
Algorithm: scrypt
URL (difficulty 0.001): stratum+tcp://pools.cryptoskills.com:3009 -->Little Miners URL (Vardiff 8 ): stratum+tcp://pools.cryptoskills.com:3033 URL (difficulty 256): stratum+tcp://pools.cryptoskills.com:3257--> Bigger Miners
THE FIRST 10 MINERS WILL GET FREE CapitalCoin WHEN THE FIRST BLOCKs WILL BE FOUND! THANK YOU! I've been waiting for a p2pool! :3
|
|
|
|
Lima99 (OP)
|
|
July 29, 2014, 02:37:50 AM |
|
@CryptoSkills
Could you please verify that you are in sync with the block explorer as it does not appear you are.
|
|
|
|
CryptoSkills
Full Member
Offline
Activity: 126
Merit: 100
BitCoin, webdesign and coding.
|
|
July 29, 2014, 09:08:53 AM |
|
@CryptoSkills
Could you please verify that you are in sync with the block explorer as it does not appear you are.
I'm gonna check it right now. I see all the block pending. I strongly think we're on a fork. I'll redownload the blockchain with your given addnode.
|
|
|
|
CryptoSkills
Full Member
Offline
Activity: 126
Merit: 100
BitCoin, webdesign and coding.
|
|
July 29, 2014, 09:29:05 AM Last edit: July 29, 2014, 10:32:22 AM by CryptoSkills |
|
@CryptoSkills
Could you please verify that you are in sync with the block explorer as it does not appear you are.
I'm gonna check it right now. I see all the block pending. I strongly think we're on a fork. I'll redownload the blockchain with your given addnode. Ok, problem solved, we were on fork. I didn't know that there were any fork on this coin Btw now everything's fine. Redownloading the bockchain and will be ready to mine again in a few minutes! Come and join our CryptoSkills Pool! (ps we're NOMP based. not P2P ) EDIT: 50% of the blockchain updated.. Just wait a bit and come in our Pool!
|
|
|
|
akk123
|
|
July 29, 2014, 10:53:28 AM |
|
rpcuser=xxx rpcpassword=xxx rpcallowip=127.0.0.1 rpcport=22133 port=22033 daemon=1 server=1 listen=1 maxconnections=1 connect=31.220.51.2 addnode=31.220.51.2
this is the conf file i use. it is stable as no other nodes but the blockchain node.
|
|
|
|
Lima99 (OP)
|
|
July 29, 2014, 11:17:51 AM Last edit: July 29, 2014, 11:40:20 AM by Lima99 |
|
rpcuser=xxx rpcpassword=xxx rpcallowip=127.0.0.1 rpcport=22133 port=22033 daemon=1 server=1 listen=1 maxconnections=1 connect=31.220.51.2 addnode=31.220.51.2
this is the conf file i use. it is stable as no other nodes but the blockchain node.
Please add noirc=1so it would look like noirc=1 maxconnections=100 connect=31.220.51.2 addnode=172.245.214.28 addnode=201.127.227.200 addnode=41.183.23.75 addnode=50.197.11.193 addnode=69.123.144.189 addnode=70.72.139.214 addnode=76.30.45.16 addnode=81.106.120.65 addnode=95.81.208.239
as I believe the bad node are getting added via IRC. The update from 7/24/14 has the client connet to CapitalCoin01 instead of the default CapitalCoin00, but to be on the safe side just add the "noirc=1". To stop the client from trying to get peers from IRC.
|
|
|
|
CryptoSkills
Full Member
Offline
Activity: 126
Merit: 100
BitCoin, webdesign and coding.
|
|
July 29, 2014, 11:18:58 AM |
|
THE FIRST 10 MINERS WILL GET FREE CPTL WHEN THE FIRST BLOCK WILL BE FOUND! ONLY 0.5% FEE!!!
Low 0.5% fees!! High performance Node.js backend User friendly mining client Multi-coin Pool 24/7 Support No registration needed! Point your miners to our pool, set your own address and start getting payout every 20 seconds! EU based DDOS protected Under constant improvements for your mining pleasure! Why choose a NOMP pool? 1) It's Safer than a normal Pool. Cause you do not need to give any personal info such email or passwords.
2) It's faster: point your miners, set your address in your miner config and earn coind immediately with auto payouts every 30 seconds!
3) It's lighter for your internet connection than normal MPOS pool.
Are you still waiting to mine on http://pools.cryptoskills.com/ ?? Quick Guide how to mine on CRYPTOSKILLS POOLS (without even entering the website!!)
Configuration:
Username: your CapitalCoin wallet address
Password: anything (could be a letter or number or whatever you want)
Algorithm: scrypt
URL (difficulty 0.001): stratum+tcp://pools.cryptoskills.com:3009 -->Little Miners URL (Vardiff 8 ): stratum+tcp://pools.cryptoskills.com:3033 URL (difficulty 256): stratum+tcp://pools.cryptoskills.com:3257--> Bigger Miners
THE FIRST 10 MINERS WILL GET FREE CapitalCoin WHEN THE FIRST BLOCKs WILL BE FOUND!
|
|
|
|
CryptoSkills
Full Member
Offline
Activity: 126
Merit: 100
BitCoin, webdesign and coding.
|
|
July 29, 2014, 12:53:35 PM |
|
ok fork issue again!
Redwnlding the chain with noirc parameter in conf...sorry for the inconvenience!
|
|
|
|
Bonez58
Newbie
Offline
Activity: 33
Merit: 0
|
|
July 29, 2014, 08:05:33 PM |
|
Can anyone explain to me why my PoW mined coins do not show up when I search my wallet address in the block explorer? My wallet says there are 44 transactions, but the block explorer only shows 4 of them - none of which are PoW mined. It only shows transactions where I sent coins from one wallet to another
|
|
|
|
Lima99 (OP)
|
|
July 29, 2014, 10:40:27 PM Last edit: July 30, 2014, 11:48:50 PM by Lima99 |
|
Can anyone explain to me why my PoW mined coins do not show up when I search my wallet address in the block explorer? My wallet says there are 44 transactions, but the block explorer only shows 4 of them - none of which are PoW mined. It only shows transactions where I sent coins from one wallet to another One of your wallet may be on the incorrect fork First find out at what block/height is the block explorer. then find out at what block/height are each of your wallets. If any of your wallest are not in sync with the block/height of the block explorer that will mean that the wallet is on the wrong fork. To correct the issue and get back on the correct fork you need to do the following. https://bitcointalk.org/index.php?topic=683450.msg7966986#msg7966986
|
|
|
|
|