Nickers (OP)
Newbie
Offline
Activity: 44
Merit: 0
|
|
March 15, 2012, 04:31:22 PM |
|
I have a batch file that looks like this: cgminer -o http://pool.abcpool.co:8332 -u xxxxx -p x --load-balance -I 10 --temp-target 75 --auto-fan And the reason I have load balance on is because I wan't to have BTC Guild as a balanced pool to also mine from, however whenever I add BTC Guilds into the batch above with the -o Cgminer no longer runs... Here's what the pools connection for Cgminer says (bellow) https://www.btcguild.com/how_to_connect.php "After downloading and extracting cgminer, run cgminer.exe. When you launch cgminer.exe, enter the following: URL: http://mine2.btcguild.com:8332/Username: [btc guild username]_[worker name] Password: [leave blank]" For example adding the bellow gets me no where: cgminer -o http://pool.abcpool.co:8332 -u xxxxx -p x -o http://mine2.btcguild.com:8332 -u xxxxx_xxxxxx_1 -p --load-balance -I 10 --temp-target 75 --auto-fan Any help, thanks
|
|
|
|
DeathAndTaxes
Donator
Legendary
Offline
Activity: 1218
Merit: 1079
Gerald Davis
|
|
March 15, 2012, 05:17:19 PM |
|
Use the config file. Take your command line parameters that work. Launch cgminer. press S and then L (I think "write log"). Default filename is fine so press Enter. You now have a file named cgminer.conf. It has all the paremters and you can launch cgminer without any command line params. just "cgminer". You may have some invalid parameters (like vddc) just delete or edit those lines. Adding a second pool is easy at that point. "pools" : [ { "url" : "192.168.0.189:9332", "user" : "user", "pass" : "pass" },
{ "url" : "pool2.com:8332", "user" : "user", "pass" : "pass" }, { "url" : "pool3.com:8332", "user" : "user", "pass" : "pass" } ], Just the pools parameter is included in this snippet.
|
|
|
|
DeathAndTaxes
Donator
Legendary
Offline
Activity: 1218
Merit: 1079
Gerald Davis
|
|
March 15, 2012, 05:31:38 PM |
|
Okay I see, So I still use the batch to start up and run my settings, and I put the pools info in the config
Um no. Just use your working settings to build a config file the easy way. You can set every single setting in the config file. Changing it is as easy as editing a text file. No real reason to use the batch file or command line unless you like putting a square peg in a round hole. Example (and please don't just use this one use the steps above to build your OWN config file): { "pools" : [ { "url" : "192.168.0.189:9332", "user" : "user", "pass" : "pass" }, { "url" : "pool2.com:8332", "user" : "user", "pass" : "pass" }, { "url" : "pool3.com:8332", "user" : "user", "pass" : "pass" } ], "intensity" : "8", "vectors" : "2", "worksize" : "256", "kernel" : "phatk", "gpu-engine" : "725-860, 725-870, 725-830, 725-830, 725-870, 725-830, 725-830, 725-870", "gpu-memclock" : "150", "gpu-vddc" : "1.050, 1.050, 1.050, 1.050, 1.050, 1.050, 1.050, 1.050", "auto-gpu" : true, "submit-stale" : true, "temp-cutoff" : "68", "temp-overheat" : "63", "temp-target" : "58", "temp-hysteresis" : "2", "api-port" : "4028", "gpu-threads" : "1", "log" : "10", "queue" : "1", "api-listen" : true, "api-port" : "4028" }
|
|
|
|
Nickers (OP)
Newbie
Offline
Activity: 44
Merit: 0
|
|
March 15, 2012, 05:32:48 PM |
|
Okay I see, So I still use the batch to start up and run my settings, and I put the pools info in the config
Um no. Just use your working settings to build a config file the easy way. You can set every single setting in the config file. Changing it is as easy as editing a text file. No real reason to use the batch file or command line unless you like putting a square peg in a round hole. Hey thanks man! I see that after creating the config its all their and I just need to run cgminer, thanks!!
|
|
|
|
DeathAndTaxes
Donator
Legendary
Offline
Activity: 1218
Merit: 1079
Gerald Davis
|
|
March 15, 2012, 05:35:08 PM |
|
No prob. Once you use config file you will never go back to command line anymore. So much easier to keep your settings organized and make changes. Just edit text file, save and restart cgminer.
|
|
|
|
Nickers (OP)
Newbie
Offline
Activity: 44
Merit: 0
|
|
March 15, 2012, 05:40:44 PM |
|
Yes loads more organized, Im still not running smoothly however /: { "pools" : [ { "url" : "http://pool.abcpool.co:8332", "user" : "xxxxx.1", "pass" : "x" },
{ "url" : "http://mine2.btcguild.com:8332", "user" : "xxxxx_xxxxx_1", "pass" : "" } ],
"intensity" : "10", "vectors" : "1", "worksize" : "64", "kernel" : "poclbm", "gpu-engine" : "0-0", "gpu-fan" : "0-85", "gpu-memclock" : "0", "gpu-memdiff" : "0", "gpu-powertune" : "0", "gpu-vddc" : "0.000", "temp-cutoff" : "90", "temp-overheat" : "85", "temp-target" : "75", "api-port" : "4028", "auto-fan" : true, "expiry" : "120", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-threads" : "3", "log" : "5", "no-longpoll" : true, "queue" : "1", "retry-pause" : "5", "scan-time" : "60", "temp-hysteresis" : "3", "shares" : "0", "load-balance" : true, "kernel-path" : "/usr/local/bin" }
cgminer says im connected to multiple pools yet the pool 1 isn't being used at all?
|
|
|
|
DeathAndTaxes
Donator
Legendary
Offline
Activity: 1218
Merit: 1079
Gerald Davis
|
|
March 15, 2012, 05:46:30 PM |
|
I think by default cgminer only uses 2nd pool in failover (when pool #1 becomes unresponsive).
There should be an option in the readme which makes it load balance if that is what you want it to do.
|
|
|
|
|
Nickers (OP)
Newbie
Offline
Activity: 44
Merit: 0
|
|
March 15, 2012, 05:50:36 PM |
|
Its weird, I have that in my config, and load balancing works when I have a deepbit pool in it
|
|
|
|
DeathAndTaxes
Donator
Legendary
Offline
Activity: 1218
Merit: 1079
Gerald Davis
|
|
March 15, 2012, 05:55:43 PM |
|
Sorry I can't help more than that. I never use load balancing function. I just use backups pools as failover if my p2pool node goes down.
|
|
|
|
Nickers (OP)
Newbie
Offline
Activity: 44
Merit: 0
|
|
March 15, 2012, 06:51:09 PM |
|
Thanks for the helpful config tip tho
|
|
|
|
Transisto
Donator
Legendary
Offline
Activity: 1731
Merit: 1008
|
|
April 11, 2013, 07:38:29 AM Last edit: April 11, 2013, 07:24:39 PM by Transisto |
|
Is there any way to do that in command line ? Edit : Found my answer ,,, cgminer -o mint.bitminter.com:80 -u hahahafr -p x -o http://mmrpc.bitparking.com -u hahahafr -p x -I 9 (not sure if "load balancing" & no care)
|
|
|
|
ScaryHash
|
|
May 25, 2013, 03:24:20 PM |
|
Very useful.
Thank you very much.
|
|
|
|
|