[ANN] QIBUCK COIN - X13 - POS/POBH - 1st Proof of Baghold and asset backed.

[qiwoman2]

Ok thx mate

Yes our Webmaster is collating all the emails and will be sending an en mass email to all the Holders when she pops back next week..She is going to be off for a few days on a little vacation with her Family till next Tuesday. Once She is back she will email all the FOUNDERS AND BAGHOLDERS.

WOW and mulitpool is up..I better tell the Peeps and also try to get a miner going at some point today or tomorrow.

[1714792647]

1714792647

[xcurry]

Ok thx mate

Yes our Webmaster is collating all the emails and will be sending an en mass email to all the Holders when she pops back next week..She is going to be off for a few days on a little vacation with her Family till next Tuesday. Once She is back she will email all the FOUNDERS AND BAGHOLDERS.

Ok, now i know everything, thx for answer

[Fromage]

I'm using an experimental forked ccminer for my NVidia card gtx 660 to mine x-11 instead of sgminer.

I'm getting with the old card about 1600 khash/sec (roughly)

Nvidia card is running stable and collecting shares at the Qibuck multipool.

If everything goes well I'll try to build a rig with 750ti's



 

[qiwoman2]

I'm using an experimental forked ccminer for my NVidia card gtx 660 to mine x-11 instead of sgminer.

I'm getting with the old card about 1600 khash/sec (roughly)

Nvidia card is running stable and collecting shares at the Qibuck multipool.

If everything goes well I'll try to build a rig with 750ti's



 

WOW keep up the good work..Tomorrow I will announce a little bags giveaway for all our miners stay tuned..


https://pbs.twimg.com/media/BwEiXvLCQAElVzU.png

Moon or Pleiades? Which one Guys and Gals?

[BITDV]

I'm using an experimental forked ccminer for my NVidia card gtx 660 to mine x-11 instead of sgminer.

I'm getting with the old card about 1600 khash/sec (roughly)

Nvidia card is running stable and collecting shares at the Qibuck multipool.

If everything goes well I'll try to build a rig with 750ti's



 

WOW keep up the good work..Tomorrow I will announce a little bags giveaway for all our miners stay tuned..


https://pbs.twimg.com/media/BwEiXvLCQAElVzU.png

Moon or Pleiades? Which one Guys and Gals?

Alot of people have come to the realisation , this is not a fly-by night operation or a pump and dump event , and it is reflecting in the value of QBK and its growing naturally!!

[caex]

Hello.

I downloaded the wallet unfortunately I can not synchronize no network. How to solve this problem.

[BITDV]

Hello.

I downloaded the wallet unfortunately I can not synchronize no network. How to solve this problem.

Have you set up the .conf file yet ?

TO SYNC WALLET:
Go to start type in %appdata% - roaming - qibuck
Make Qibuck.conf in txt add:
rpcuser=user
rpcpassword=<strongpassword>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=104.131.194.96

save as all files

get file right click copy qibuck.conf into qibuck roaming folder
open wallet to start syncing.

[qiwoman2]

Hello.

I downloaded the wallet unfortunately I can not synchronize no network. How to solve this problem.

Have you set up the .conf file yet ?

TO SYNC WALLET:
Go to start type in %appdata% - roaming - qibuck
Make Qibuck.conf in txt add:
rpcuser=user
rpcpassword=<strongpassword>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=104.131.194.96

save as all files

get file right click copy qibuck.conf into qibuck roaming folder
open wallet to start syncing.

Thank you for helping our Friends..

Here is updated asset sheet..
I will be updating weekly the assets sheet as we accrue more longer term assets, some may be liquidated for new ones as we have also some liquidity to trade..

https://docs.google.com/spreadsheets/d/1X5FVAZ4zzhjjAsp9-Jsxi7CZ_kGwEsOF4uTdDvrcsRI/edit#gid=0

[caex]

TO SYNC WALLET:
Go to start type in %appdata% - roaming - qibuck
Make Qibuck.conf in txt add:

rpcuser=user
rpcpassword=<strongpassword>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=104.131.194.96

if you do not need a port here???
still I can not get the network to synchronize

[qiwoman2]

TO SYNC WALLET:
Go to start type in %appdata% - roaming - qibuck
Make Qibuck.conf in txt add:

rpcuser=user
rpcpassword=<strongpassword>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=104.131.194.96

if you do not need a port here???
still I can not get the network to synchronize

Try deleting all files form the roaming folder except .conf and .dat then re open the client, see if that works. 

[chilly2k]

   Is there any more info on the pool?  Like the total QBK payed has been at 1.46 all day.  Was anything earned?  I have a couple of gridseeds pointed at the scrypt pool.  It seemed to take quite a while for the statistics to update.  Then it seemed like they only updated about once every 3 hours?  Is that correct.  Somewhere I saw that there would be a payout twice a day.  Whats the minimum QBK earned before getting a payout. 

  I have a feeling the hash rate is so low we might not see a payout for a while.  That's not a big deal, I just like to know.  I would rather get 1 QBK a week, then toss the hash to some coin that could be worth nothing...     

[BITDV]

   Is there any more info on the pool?  Like the total QBK payed has been at 1.46 all day.  Was anything earned?  I have a couple of gridseeds pointed at the scrypt pool.  It seemed to take quite a while for the statistics to update.  Then it seemed like they only updated about once every 3 hours?  Is that correct.  Somewhere I saw that there would be a payout twice a day.  Whats the minimum QBK earned before getting a payout. 

  I have a feeling the hash rate is so low we might not see a payout for a while.  That's not a big deal, I just like to know.  I would rather get 1 QBK a week, then toss the hash to some coin that could be worth nothing...     

It was only set up just over 12 hrs ago and paysout every 24 hrs to you QBK  addy that was the test run we had so it is actually 0 QBK paid out it will update when the payout cycle happens as it hasnt ahappened yet so it wont be any paid out so far

[qiwoman2]

   Is there any more info on the pool?  Like the total QBK payed has been at 1.46 all day.  Was anything earned?  I have a couple of gridseeds pointed at the scrypt pool.  It seemed to take quite a while for the statistics to update.  Then it seemed like they only updated about once every 3 hours?  Is that correct.  Somewhere I saw that there would be a payout twice a day.  Whats the minimum QBK earned before getting a payout. 

  I have a feeling the hash rate is so low we might not see a payout for a while.  That's not a big deal, I just like to know.  I would rather get 1 QBK a week, then toss the hash to some coin that could be worth nothing...     

It was only set up just over 12 hrs ago and paysout every 24 hrs to you QBK  addy that was the test run we had so it is actually 0 QBK paid out it will update when the payout cycle happens as it hasnt ahappened yet so it wont be any paid out so far

Thank you BTVD for helping our Community of Miners.. Also welcome to our QBK home and I am sincerely grateful to POLONIEX STAFF, OUR RESIDENT TROLLS, DEVS, WHALES, MODS, TEAM, COMMUNITY..Thank you for helping QBK grow from a turbulent start that it had..

[caex]

TO SYNC WALLET:
Go to start type in %appdata% - roaming - qibuck
Make Qibuck.conf in txt add:

rpcuser=user
rpcpassword=<strongpassword>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=104.131.194.96

if you do not need a port here???
still I can not get the network to synchronize

Try deleting all files form the roaming folder except .conf and .dat then re open the client, see if that works. 

It does not work in any way. Correct began to sync automatically

[BITDV]

TO SYNC WALLET:
Go to start type in %appdata% - roaming - qibuck
Make Qibuck.conf in txt add:

rpcuser=user
rpcpassword=<strongpassword>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=104.131.194.96

if you do not need a port here???
still I can not get the network to synchronize

Try deleting all files form the roaming folder except .conf and .dat then re open the client, see if that works. 

It does not work in any way. Correct began to sync automatically

when you make the .conf file 2 things the q in qibuck.conf has to be capital so it has to look like this Qibuck.conf and when you save the .conf file make sure you save it as allfiles not a text document , i did do that but i had to go in and look for hidden file as it showed Qibuck.conf but when i got it to show hidden file , I actually had saved it as Qibuck.conf.txt i just renamed it and removed the .txt and it worked fine from then on , hope that help. I someone else can explain it better please post to help this member

[caex]

TO SYNC WALLET:
Go to start type in %appdata% - roaming - qibuck
Make Qibuck.conf in txt add:

rpcuser=user
rpcpassword=<strongpassword>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=104.131.194.96

if you do not need a port here???
still I can not get the network to synchronize

Try deleting all files form the roaming folder except .conf and .dat then re open the client, see if that works. 

It does not work in any way. Correct began to sync automatically

when you make the .conf file 2 things the q in qibuck.conf has to be capital so it has to look like this Qibuck.conf and when you save the .conf file make sure you save it as allfiles not a text document , i did do that but i had to go in and look for hidden file as it showed Qibuck.conf but when i got it to show hidden file , I actually had saved it as Qibuck.conf.txt i just renamed it and removed the .txt and it worked fine from then on , hope that help. I someone else can explain it better please post to help this member

THANK YOU VERY MUTCH WORK

[ChrisLandin]

Just got my first payout from the multipool.

Not a lot but I don't have mega hash, 0.76 of a Qibuck on x11 algo

[BITDV]

TO SYNC WALLET:
Go to start type in %appdata% - roaming - qibuck
Make Qibuck.conf in txt add:

rpcuser=user
rpcpassword=<strongpassword>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=104.131.194.96

if you do not need a port here???
still I can not get the network to synchronize

Try deleting all files form the roaming folder except .conf and .dat then re open the client, see if that works. 

It does not work in any way. Correct began to sync automatically

when you make the .conf file 2 things the q in qibuck.conf has to be capital so it has to look like this Qibuck.conf and when you save the .conf file make sure you save it as allfiles not a text document , i did do that but i had to go in and look for hidden file as it showed Qibuck.conf but when i got it to show hidden file , I actually had saved it as Qibuck.conf.txt i just renamed it and removed the .txt and it worked fine from then on , hope that help. I someone else can explain it better please post to help this member

THANK YOU VERY MUTCH WORK

Awesome mate glad to help!!

[BITDV]

Just got my first payout from the multipool.

Not a lot but I don't have mega hash, 0.76 of a Qibuck on x11 algo

First Day but the hash rate is increase , hence this will increase the payout amount , we are building !!
And I got paid so very happy!!

[BITDV]

ATTENTION!!

Sorry for the red letters , just want to get this persons attention!!

The Dev on the multipool said all payouts went out expect for 1 , which he said the address isnt correct this is the address that was used as the username and for the payout  QYwZM3Ct1nGDFfzjjPbKXN6APGQQ4nmXQE

If this is you change it to the correct QBK address and contact me via PM so we can sort it out!!