[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[fanepatent]

Hey guys, question.. I have used 0 to 800000 plots for Drive 1 (just for testing) and plots 800000 to 1600000 for Drive 2, is it possible to expand the plots on Drive 1? If so, can i just adjust the batch file to start at 1600000?

That is exactly how to do it. Start the next plot where you left off in the previous file

[Amph]

Twitter
https://twitter.com/ev0k3d/status/506845328814133249

Re posting this article on Burst. Great work community and team!

lower wasn't 200s? this mean 500%

Lower was 96 satoshis

c-cex say 175

I am sure you could figure it out but just to help you see the truth:

it could be just a negative peak, it can't be counted

[har23]

Twitter
https://twitter.com/ev0k3d/status/506845328814133249

Re posting this article on Burst. Great work community and team!

lower wasn't 200s? this mean 500%

Lower was 96 satoshis

c-cex say 175

I am sure you could figure it out but just to help you see the truth:

Exactly !!!!

[saamxx]

Yea, now I have a serious question...

Once I have switched over to the v2 pool with my solo plots, what if I decide that I want to go back to solo? It doesn't seem like I will be able to due to the password error...

Dev...

What can I do here, I wanted  to only throw 1 or 2 of my TB to the pool, but apparently that isn't an option, it's all or nothing?

let me know if there is anything I can do in order to go back to solo.

Thanks!

To go back solo, you have to spend 1 BURST to set your payout back to your own account instead of the pool's account. Go to http://localhost:8125/rewardassignment.html and at the bottom, put in your password and YOUR burst address.  After a few confirms it that error will go away and you will be rewarded for blocks you find.
 

Everyone should know that if you "signed up" for V2 pool minig from the reward assignment you CANNOT solo mine with that ID/password anymore. I just lost over 24 hours of mining due to this.

Good to know we can go back.

We need to put that info in OP, asap!!!!
Thanks, for that valuable tip.

[crowetic]

Yea, now I have a serious question...

Once I have switched over to the v2 pool with my solo plots, what if I decide that I want to go back to solo? It doesn't seem like I will be able to due to the password error...

Dev...

What can I do here, I wanted  to only throw 1 or 2 of my TB to the pool, but apparently that isn't an option, it's all or nothing?

let me know if there is anything I can do in order to go back to solo.

Thanks!

To go back solo, you have to spend 1 BURST to set your payout back to your own account instead of the pool's account. Go to http://localhost:8125/rewardassignment.html and at the bottom, put in your password and YOUR burst address.  After a few confirms it that error will go away and you will be rewarded for blocks you find.
 

amazing!!! Thank you so much for the response!

[har23]

2000 tonight !!!

[MrBtcSenior]

2000 tonight !!!!

Finaly i think 1 Burst = 10$ in 2 month

The value is increasing at an exponential rate, look out for a bubble

[fabula]

2000 tonight !!!

Wait 5k-7k and then let's go where the real player are: BITTREX.

[Razerglass]

so im starting with 1TB, should i do the plots in chunks of 80000? or what would the best be for filling the whole harddrive?

[SpeedDemon13]

so im starting with 1TB, should i do the plots in chunks of 80000? or what would the best be for filling the whole harddrive?

Multiple plots or one large plot, doesn't matter too much. Personally, I like run one single plot.

[mm4]

Does anyone plot on  AMD X8 FX 9590 or 9370?  How fast are they?

[fanepatent]

so im starting with 1TB, should i do the plots in chunks of 80000? or what would the best be for filling the whole harddrive?

Make plots in chunks of 100 Gb. Thats 400000 nonces. And actually, my calculations were off. 80000 of nonces is 20 Gb...

[fanepatent]

Does anyone plot on  AMD X8 FX 9590 or 9370?  How fast are they?

This is a HDD mining coin. No GPU/CPU. Read the OP

[Razerglass]

so im starting with 1TB, should i do the plots in chunks of 80000? or what would the best be for filling the whole harddrive?

Multiple plots or one large plot, doesn't matter too much. Personally, I like run one single plot.

so i have a i5 quad core with 8gb ram


C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate %* 14062819640288676663 1 80000 1000 2
pause


is this optimal for plot generation? im doing other things so using 4 threads hits my cpu at 100%.. it doesnt look like its using much ram at all though and its moving really slow

[SpeedDemon13]

2000 tonight !!!!

Finaly i think 1 Burst = 10$ in 2 month

The value is increasing at an exponential rate, look out for a bubble

Once this reaches NXT price, then people have to be on guard at that point and up, but never know depending on several factors.

2000 tonight !!!

Wait 5k-7k and then let's go where the real player are: BITTREX.

Yup, have to see when this hit a larger exchange. I would prefer someone that is doing NXT already, ie. Cryptsy, BTER, Poloniex, BTC38, etc....

[fanepatent]

so im starting with 1TB, should i do the plots in chunks of 80000? or what would the best be for filling the whole harddrive?

Multiple plots or one large plot, doesn't matter too much. Personally, I like run one single plot.

so i have a i5 quad core with 8gb ram


C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate %* 14062819640288676663 1 80000 1000 2
pause


is this optimal for plot generation? im doing other things so using 4 threads hits my cpu at 100%.. it doesnt look like its using much ram at all though and its moving really slow

The stagger of 1000 will mean that it will take longer to scan the file for the correct nonce. You should increase that. I suggest you use 8000

[blizzen]

Yes, i send your 50 Coins.

Mercy!

[SpeedDemon13]

so im starting with 1TB, should i do the plots in chunks of 80000? or what would the best be for filling the whole harddrive?

Multiple plots or one large plot, doesn't matter too much. Personally, I like run one single plot.

so i have a i5 quad core with 8gb ram


C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate %* 14062819640288676663 1 80000 1000 2
pause


is this optimal for plot generation? im doing other things so using 4 threads hits my cpu at 100%.. it doesnt look like its using much ram at all though and its moving really slow

You can try a higher -Xmx number and higher stagger size until it gives a error, then lower it until it works fine. Maybe -Xmx and stagger size at 4191 or 2048.

If you plan to not use the PC for any intensive cpu applications, the 4 threads are fine. If it's your PC to do work or anything else, 3 threads would work better.

[waxo]

Yes, i send your 50 Coins.

Mercy!

Merci is better

[crowetic]

2000 tonight !!!

indeed my friend, indeed.