[ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay]

[Erkallys]

I just download the source from github or I need to pass by the Terminal (sorry if it is stupid it's my first day in Linux world) ?

Edit : made. But now it asks me with what application open it (executable).

Maybe you need to set the file permissions to add executable to them?  The easiest way is to use the file viewer and click “Allow executing file as program” under the properties for the file.  You can also use the “chmod 755 magi-qt” command at the terminal.

I was set in the properties that no one could execute it. Now everyone so I click on it and then execute. And then ... NOTHING ! Just nothing happen. Help me please.

[Lightsplasher]

I just download the source from github or I need to pass by the Terminal (sorry if it is stupid it's my first day in Linux world) ?

Edit : made. But now it asks me with what application open it (executable).

Maybe you need to set the file permissions to add executable to them?  The easiest way is to use the file viewer and click “Allow executing file as program” under the properties for the file.  You can also use the “chmod 755 magi-qt” command at the terminal.

I was set in the properties that no one could execute it. Now everyone so I click on it and then execute. And then ... NOTHING ! Just nothing happen. Help me please.

Can you try running it from the terminal and see if there are any error messages that show up when you try to run the file? (From terminal: ./magi-qt)  Hopefully that will give some clues as to what is the problem.

[Erkallys]

I just download the source from github or I need to pass by the Terminal (sorry if it is stupid it's my first day in Linux world) ?

Edit : made. But now it asks me with what application open it (executable).

Maybe you need to set the file permissions to add executable to them?  The easiest way is to use the file viewer and click “Allow executing file as program” under the properties for the file.  You can also use the “chmod 755 magi-qt” command at the terminal.

I was set in the properties that no one could execute it. Now everyone so I click on it and then execute. And then ... NOTHING ! Just nothing happen. Help me please.

Can you try running it from the terminal and see if there are any error messages that show up when you try to run the file? (From terminal: ./magi-qt)  Hopefully that will give some clues as to what is the problem.

When I click on it I have the option "Launch from a Terminal". But it open a Terminal that shut down the following second.

Edit : when I write ./magi-qt from the Terminal it says me " Binary file impossible to launch".

[joelao95]

Oh fiddlesticks!

Just tried to send a rather large amount of XMG to myself for staking and got "Error. Transaction creation failed".

Wallet version 1.2.1.1 64 bit 11/Jan/15 04:18 from m-wallet-1.2.1.1.zip

Is there a hard limit on the maximum amount in one transaction?

Yeah, this is because a rather large amount of inputs needed to send large amount of coins.

[Erkallys]

What is the minimum staking time ?

[joelao95]

What is the minimum staking time ?

2hrs.

[joelao95]

I just download the source from github or I need to pass by the Terminal (sorry if it is stupid it's my first day in Linux world) ?

Edit : made. But now it asks me with what application open it (executable).

Maybe you need to set the file permissions to add executable to them?  The easiest way is to use the file viewer and click “Allow executing file as program” under the properties for the file.  You can also use the “chmod 755 magi-qt” command at the terminal.

I was set in the properties that no one could execute it. Now everyone so I click on it and then execute. And then ... NOTHING ! Just nothing happen. Help me please.

Can you try running it from the terminal and see if there are any error messages that show up when you try to run the file? (From terminal: ./magi-qt)  Hopefully that will give some clues as to what is the problem.

When I click on it I have the option "Launch from a Terminal". But it open a Terminal that shut down the following second.

Edit : when I write ./magi-qt from the Terminal it says me " Binary file impossible to launch".

What's your linux distro? I mostly think the issue is with compilation. Installation of dependencies can be found here:
https://bitcointalk.org/index.php?topic=735170.msg8800103#msg8800103

You may compile magid and run it as well. (run from the terminal: ./magid &)

Right click on magi-qt, can you find "Excute" and run it from there?

[Erkallys]

I just download the source from github or I need to pass by the Terminal (sorry if it is stupid it's my first day in Linux world) ?

Edit : made. But now it asks me with what application open it (executable).

Maybe you need to set the file permissions to add executable to them?  The easiest way is to use the file viewer and click “Allow executing file as program” under the properties for the file.  You can also use the “chmod 755 magi-qt” command at the terminal.

I was set in the properties that no one could execute it. Now everyone so I click on it and then execute. And then ... NOTHING ! Just nothing happen. Help me please.

Can you try running it from the terminal and see if there are any error messages that show up when you try to run the file? (From terminal: ./magi-qt)  Hopefully that will give some clues as to what is the problem.

When I click on it I have the option "Launch from a Terminal". But it open a Terminal that shut down the following second.

Edit : when I write ./magi-qt from the Terminal it says me " Binary file impossible to launch".

What's your linux distro? I mostly think the issue is with compilation. Installation of dependencies can be found here:
https://bitcointalk.org/index.php?topic=735170.msg8800103#msg8800103

You may compile magid and run it as well. (run from the terminal: ./magid &)

Right click on magi-qt, can you find "Excute" and run it from there?

I'm on Raspbian. The excute do not work. Nothing happens.

[111magic]

Erkallys if you don't get it working you can also ask (pm) digibob00. He is an expert with that.

[Erkallys]

I hope he will can help me because it's turning me crazy !

[joelao95]

I hope he will can help me because it's turning me crazy !

Sorry about that, digibob00 will be the best person for Raspbian, shoot him a PM. In my linux box (xubuntu), in whatever the way launching qt-wallet, it's just doing well.

Besides the qt wallet, I suggest compiling magid (use the guide I posed in the prior post), and run it from command line. magid will exactly do the same thing as the qt wallet including staking.

[Erkallys]

I hope he will can help me because it's turning me crazy !

Sorry about that, digibob00 will be the best person for Raspbian, shoot him a PM. In my linux box (xubuntu), in whatever the way launching qt-wallet, it's just doing well.

Besides the qt wallet, I suggest compiling magid (use the guide I posed in the prior post), and run it from command line. magid will exactly do the same thing as the qt wallet including staking.

I've sent him a PM. But how to compile ?

[111magic]

I hope he will can help me because it's turning me crazy !

Sorry about that, digibob00 will be the best person for Raspbian, shoot him a PM. In my linux box (xubuntu), in whatever the way launching qt-wallet, it's just doing well.

Besides the qt wallet, I suggest compiling magid (use the guide I posed in the prior post), and run it from command line. magid will exactly do the same thing as the qt wallet including staking.

I've sent him a PM. But how to compile ?

Think Joe will respond later on this one!

[111magic]

Good to see you around, NK. Nice store!

Hehe, i always around joe but not active comment haha just silent reader, 
and thanks man 

Just curious how to buy with coins , a guide?

as simple as you buy on shop, pick your item, ask me for price (there should be discount every day) becuase price is on IDR so i need convert it to BTC first then to XMG, i guaranted it fast, no need long respon for ask the price hehe then i give the address to you for payment, currently i will use local shipment so price will depends to how much tax for shipment, that is it,

it's not auto system because it just started hehe like personal selling it more trusted able between buyer and seller if they meet on social media i think,

Thanks for the respons WakhidNKcom!

[feldenthorne]

I'm on Raspbian. The excute do not work. Nothing happens.

Please check out my GitHub page, https://github.com/feldenthorne/magi/tree/armv7l_official. You should be able to build the Qt wallet after entering the following:

Code:

sudo apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb5.1++-dev git libgmp-dev
git clone https://github.com/feldenthorne/magi
cd magi
git checkout armv7l_official
qmake
make

I recently made some changes that should fix builds for the RPi2, so you should be good.

Edit: Just updated the binary release on GitHub, but you should probably build it yourself because it's always better to be more cautious than less.
And here's my GitHub pull request from the official repo for the wary: https://github.com/magi-project/magi/pull/5.

Edit 2: Added in libgmp-dev to the apt-get command.

[Spexx]

I told before that I would donate 250 XMG. You forgot that fast amigo
!https://bitcointalk.org/index.php?topic=735170.msg10752198#msg10752198
 

Oh yeah that was you wasn't it. Silly me. Obviously the Alzheimers setting in.

[joelao95]

I'm on Raspbian. The excute do not work. Nothing happens.

Please check out my GitHub page, https://github.com/feldenthorne/magi/tree/armv7l_official. You should be able to build the Qt wallet after entering the following:

Code:

sudo apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb5.1++-dev git
git clone https://github.com/feldenthorne/magi
cd magi
git checkout armv7l_official
qmake
make

I recently made some changes that should fix builds for the RPi2, so you should be good.

Edit: Just updated the binary release on GitHub, but you should probably build it yourself because it's always better to be more cautious than less.
And here's my GitHub pull request from the official repo for the wary: https://github.com/magi-project/magi/pull/5.

I merged pull request, finally; Erkallys, let us know if it works for you.

[joelao95]

My final submission then ...

https://www.dropbox.com/s/7l5tcjze67ahsr7/sigma-spexx.jpg

..

Edit: The Sum of Equality.

Sent some coins..

[jokowi]

$magi money

[joelao95]

...
$magi money

What does 4.6 mean?   I will send some coins if you can post your address.