[ANN]Joincoin (J) ToR Anonymous All Algorithm mining! *1.3 WALLET UPDATE!*

[Grim]

- ADD SCRYPT-CHACHA -

I suggest scrypt-chacha at a fixed high n-factor!

eg. n-factor of 15.
Above 15 cpu code will dominate again!
You can read about the reasons behind that in the ultracoin thread.

---------------------------------------------------------------------------

So why again scrypt-chacha at n-factor 15?

This algo favors (or lets rather say provides the opportunity) to mine with lower end gpus.

[ernesthor]

COINMARKET CAP

March      #183     Joincoin       $ 0.009312  per coin       1,565,187  total coins       new MAXIMUM
April        #176     Joincoin       $ 0.011072  per coin       1,583,030  total coins       new MAX
June        #174     Joincoin       $ 0.019466  per coin       1,621,030  total coins       new MAX
July         #125     Joincoin       $ 0.044192  per coin       1,677,713  total coins       new MAX  
Aug         #103     Joincoin       $ 0.077573  per coin       1,698,330  total coins       new MAX
Sept          #75     Joincoin       $ 0.096143  per coin       1,788,726  total coins       new MAX
02/09        #74     Joincoin       $ 0.100076  per coin       1,790,395  total coins       new MAX

New month, Joincoin open new opportunities to investors. See evolution and think it.
The best investment is change bitcoin for joincoin, now Joincoin is still a cheap coin...
Joincoin is growing slowly but safely. POW/POS phase is near, the prize go up.

We were not wrong when we were recommending at $ 0.035... Growth continues...

- Buy it in Bittrex: https://bittrex.com/Market/Index?MarketName=BTC-J
- or Mine it: Multi algorythm mining, (cpu, gpu x11, scrypt, asic sha256), sha256 pool, directly solo mining... you decide.
Support to config in ANN of Joincoin. There are Joincoins (J) to mine yet.
- Multifaucet with free rewards, click link below.

[DOGEbubble]

- ADD SCRYPT-CHACHA -

I suggest scrypt-chacha at a fixed high n-factor!

eg. n-factor of 15.
Above 15 cpu code will dominate again!
You can read about the reasons behind that in the ultracoin thread.

---------------------------------------------------------------------------

So why again scrypt-chacha at n-factor 15?

This algo favors (or lets rather say provides the opportunity) to mine with lower end gpus.

At least a couple of major Cryptos are using this algo using n-factor of 16 or 17. They are talking about going back to n-factor of 15.

Will add it to the up-coming POW/POS wallet upgrade as long as it can be seamlessly integrated without causing a delay in the implementation. 

[kama]

After update will coin cap be higher?

[DOGEbubble]

are you the dev?

After update will coin cap be higher?

I and ernesthor are the ones on the present dev team.

The initial dev Love_of_Algo disappeared and never showed up again or returned my pm.
---------------------------------------------------------------------------------------------------------------------------------

Our works are to keep the Joincoin going forward and prosperous.

By maintaining the mining and trading and value of Joincoin so that it will have a strong foothold in the cryptos world, and to do even better from here:

We are #1  @multifaucet give-away site since inception in Feb 2015. We have several blockchain explorers running.

Therefore, the next step would be the transition to POS/POW; after that more extensive activities such as joining more exchanges/merchants site/others platforms would be practical without need(s) for notifying them about the change(s).

The POW/POS transition would be to keep both in the end after about the 2-3 month transitional period.

If probable, the transition would be at block 266,201 (Total 2 million joincoin) or even earlier at block 250,001, i.e., 7-8 weeks from now.

The transition would end when additional 4 million Joincoins are created. After that, a relatively constant POW block reward and POS% will be set from there. In order for POS to be significant and for the POW block rewards not to be too small, the combined
annual % of both POW/POS has to be more than 10 %.

In short, after the transition, a total  of 2.35-2.4 million Joincoin cap would be reached. The cap would be slowly increased & would pass the 2.8 millions-mark  in 2 years and keep on increasing, unless further changes are implemented.

 

[majsta]

All is clear but IMHO if you want to continue with the plan, POS should be started much sooner than you said.

[DOGEbubble]

All is clear but IMHO if you want to continue with the plan, POS should be started much sooner than you said.

I would give the probability of starting the POW/POS transition one month earlier, (i.e., starting in less than 4 weeks @ block 225,001) a try. 

[moroz00]

The site joincoin.org link to the wallet is not working! Where else can you download the Wallet?

[DOGEbubble]

The site joincoin.org link to the wallet is not working! Where else can you download the Wallet?

From the front opening page of this forum:

----------------------------------------------------------------------------------------------------------------------
Wallet Downloads and miner software links:

This original one no longer exists:
Windows Wallet: https://mega.co.nz/#!xIUAgbIC!Cz2asJGL4nBUxKV4kQKQCFqRE45tEyEVTR--5F0NyYM


For now, you have to make it from
Joincoin Source: https://github.com/joincoin/joincoin
until a new direct Windows download is available.

----------------------------------------------------------------------------------------------------------------------
 

[binmon]

But I don't know how to do that, sniff sniff   

[DOGEbubble]

Joincoin window wallet client download

https://mega.nz/#!vVFDTDjY!Ch4qv9Kc0cO618nKJexes94Hu3uDL331GZf0eCjAaEw


Only <download through your browser> joincoin-1.3-qt and <run> are needed for you to start and create data files & file folder
(usually @  C:\users\(Active user)\AppData\Roaming\Joincoin\  folder)


and put in Joincoin.conf file to restart. The syncing would start from 56 weeks ago.

--------------------------------------------------------------------------------------------------------
It took me less than 30 minutes to sync with my window 7 computer.
--------------------------------------------------------------------------------------------------------


Joincoin.conf can be compiled from:
(Fill in rpcuser and rpcpassword and algo; gen=0 for wallet mining)
-----------------------------------------------------------------------
gen=0
listen=1
daemon=1
server=1
rpcuser=
rpcpassword=
rpcallowip=10.1.1.*
rpcport=9150
rpcconnect=127.0.0.1
algo=
addnode=gdhtrc7qoh3qowvf.onion:17941
addnode=5k7xsbnnw3mpotx6.onion:17941
addnode=7xbw5q6s4b66hdls.onion:17941
addnode=scfnohgtgod2rzid.onion:17941
addnode=2fsfvfcizsok7sx5.onion:17941
addnode=xdckaipkzzztc7qb.onion:17941
addnode=i5znffoaikqooeyc.onion:17941
addnode=drtevq326tweby2k.onion:17941
addnode=b2mgu5dvcw3m7cxw.onion:17941
addnode=gsmlz6gnk22kdij2.onion:17941
addnode=ufi2euhvrpakwrih.onion:17941
addnode=53zy47p5wly5penk.onion:17941
addnode=nwjw2badoulwc4yi.onion:17941
addnode=im4qpcjdr5uzd7yb.onion:17941
addnode=ecunlzj3niqwaeqs.onion:17941
----------------------------------------------------------------------
Probably first 8-10 addnodes should be good enough.
You can get more addnodes from http://www.multifaucet.tk/index.php?blockexplorer=J&network_info


Happy mining Joincoins.  

[soniclord]

I downoading wallet, run it, after 6 hours - wallet check too, i't is not sync. CPU average 0. Windows 8.1. Where i wrong?

[soniclord]

And what about linux wallet?

[stepmike]

I downoading wallet, run it, after 6 hours - wallet check too, i't is not sync. CPU average 0. Windows 8.1. Where i wrong?

Did you add Joincoin.conf  file with config inside  in Jcoin folder (where is wallet.dat)?

[soniclord]

I downoading wallet, run it, after 6 hours - wallet check too, i't is not sync. CPU average 0. Windows 8.1. Where i wrong?

Did you add Joincoin.conf  file with config inside  in Jcoin folder (where is wallet.dat)?

No, wallet.dat doesn't exist into folder. Config i move into folder.

[soniclord]

I downoading wallet, run it, after 6 hours - wallet check too, i't is not sync. CPU average 0. Windows 8.1. Where i wrong?

Did you add Joincoin.conf  file with config inside  in Jcoin folder (where is wallet.dat)?

No, wallet.dat doesn't exist into folder. Config i move into folder.

I reistall wallet on default path, that's ok. Thanks )

[soniclord]

i fill user, password and algo. But wallet doesn't see source of block..

[stepmike]

If you want make coin working folder in difrent place:
1. Make shorcut of joincoin-1.3-qt.exe
2. Write inside shorrcut property in shortcut  -datadir=YourNewWorkingFolder for example -datadir=D:\Jcoin\data\
3. Move or create Joincoin.conf inside with config in new working directory

Hope this helps you.

[0n0t0le]

If you want make coin working folder in difrent place:
1. Make shorcut of joincoin-1.3-qt.exe
2. Write inside shorrcut property in shortcut  -datadir=YourNewWorkingFolder for example -datadir=D:\Jcoin\data\
3. Move or create Joincoin.conf inside with config in new working directory

Hope this helps you.

In default directory created (C:\users\(Myuser\AppData\Roaming\Joincoin) by placing the  joincoin-1.3-qt.exe

Joincoin.conf has created with its own settings and put here, then restart,  blocks synchronization don t start

Here is conf:
gen=0
listen=1
daemon=1
server=1
rpcuser=test
rpcpassword=test01
rpcallowip=10.1.1.*
rpcport=9150
rpcconnect=127.0.0.1
algo=pentablake
addnode=gdhtrc7qoh3qowvf.onion:17941
addnode=5k7xsbnnw3mpotx6.onion:17941
addnode=7xbw5q6s4b66hdls.onion:17941
addnode=scfnohgtgod2rzid.onion:17941
addnode=2fsfvfcizsok7sx5.onion:17941
addnode=xdckaipkzzztc7qb.onion:17941
addnode=i5znffoaikqooeyc.onion:17941
addnode=drtevq326tweby2k.onion:17941
addnode=b2mgu5dvcw3m7cxw.onion:17941
addnode=gsmlz6gnk22kdij2.onion:17941
addnode=ufi2euhvrpakwrih.onion:17941
addnode=53zy47p5wly5penk.onion:17941
addnode=nwjw2badoulwc4yi.onion:17941
addnode=im4qpcjdr5uzd7yb.onion:17941
addnode=ecunlzj3niqwaeqs.onion:17941

[0n0t0le]

debug. log here:

ERROR: CAddrman::Read() : open failed
Invalid or missing peers.dat; recreating
Loaded 0 addresses from peers.dat  0ms
mapBlockIndex.size() = 1
nBestHeight = 0
setKeyPool.size() = 100
mapWallet.size() = 0
mapAddressBook.size() = 1
onionseed thread start
Loading addresses from .onion seeds (could take a while)
net thread start
upnp thread start
addcon thread start
opencon thread start
init message: Download done
msghand thread start
dumpaddr thread start
Added 63gqkxxae7r2g6dy.onion:17941 from 63gqkxxae7r2g6dy.onion: 0 tried, 1 new
refreshWallet
Added 3o2mhw35ksxoo6pq.onion:17941 from 3o2mhw35ksxoo6pq.onion: 0 tried, 2 new
2 addresses found from .onion seeds
onionseed thread exit
trying connection 63gqkxxae7r2g6dy.onion:17941 lastseen=129.7hrs
SOCKS5 connecting 63gqkxxae7r2g6dy.onion
ERROR: Proxy error: host unreachable
trying connection 63gqkxxae7r2g6dy.onion:17941 lastseen=129.7hrs
SOCKS5 connecting 63gqkxxae7r2g6dy.onion
ERROR: Proxy error: host unreachable
trying connection 63gqkxxae7r2g6dy.onion:17941 lastseen=129.7hrs
SOCKS5 connecting 63gqkxxae7r2g6dy.onion
ERROR: Proxy error: host unreachable
trying connection 3o2mhw35ksxoo6pq.onion:17941 lastseen=143.1hrs
SOCKS5 connecting 3o2mhw35ksxoo6pq.onion
ERROR: Proxy error: host unreachable
trying connection 3o2mhw35ksxoo6pq.onion:17941 lastseen=143.1hrs
SOCKS5 connecting 3o2mhw35ksxoo6pq.onion
ERROR: Proxy error: host unreachable
trying connection 63gqkxxae7r2g6dy.onion:17941 lastseen=129.8hrs
SOCKS5 connecting 63gqkxxae7r2g6dy.onion
ERROR: Proxy error: host unreachable
No valid UPnP IGDs found
upnp thread exit
trying connection 63gqkxxae7r2g6dy.onion:17941 lastseen=129.8hrs
SOCKS5 connecting 63gqkxxae7r2g6dy.onion
ERROR: Proxy error: host unreachable