CCminer(SP-MOD) Modded GPU kernels.

[sp_]

-i 25 is the default intensity on the gtx 1070. The 64bit exe can run -i 26, but abit slower than -i 25 and 32bit exe.

[sp_]

I have also fixed the "slow start" bug, now all the gpu's should start quickly with high intensities. (good for profitswitching rigs)

[qwep1]

what about --gputhreads 2 work on sigt or no

[sp_]

not yet.

[bigjee]

6gb version is a bit faster than 3g

Yes but he called out the 3gb 1060 as a preferred card.
Not sure why

[sp_]

The 6gb card has 10% more gpu processors and more is more expensive than the 3gb card. The 3gb cards can be clocked higher, so the difference is not so big in mining performance.

[Brucelats]

Which models of Gtx 1070 get 30-31MH/s and on which clocks?

Not all GTX can get that much hash, so it might be decieving. For example, my GTX 1070 Asus Dual OC 8GB hashes around 27-28 max.

[sp_]

Gigabyte g1 gaming 1070. Samsung memory
Driver : 394.84 (important)
Os: windows 8.1
tdp: 100%
memclock -500
coreclock +150
Default intensity (no -i parameter specified in the batfile)

Hashrate 31.5 Mhash with sp-mod #6

[wajiminer]

Gigabyte g1 gaming 1070. Samsung memory
Driver : 394.84 (important)
Os: windows 8.1
tdp: 100%
memclock -500
coreclock +150
Default intensity (no -i parameter specified in the batfile)

Hashrate 31.5 Mhash with sp-mod #6

Confirmed on windows 10 home with evga 1070 ftw

[Bibi187]

Gigabyte g1 gaming 1070. Samsung memory
Driver : 394.84 (important)
Os: windows 8.1
tdp: 100%
memclock -500
coreclock +150
Default intensity (no -i parameter specified in the batfile)

Hashrate 31.5 Mhash with sp-mod #6

I dont use ur SP, i am not donator and i dont try to find it another way.
I think u can push a little bit your 1070, try to lower memclock by 1000 and push a little bit your coreclock mb +10/20, u grab nothing from memclock.
I use ASUS 1070 8OG ( more hard to find sweep spot )
i can run them stable at 130/140 CoreClock - -2000MemClock ( i use linux so -1000 for win user ) and grab 30.3/30.8 on krnlx mod, i dont try the palgin new release from 2 day cause only win release

[P4ndoraBox]

Hi. I would like to know the best miner for Myriad-Groestl.

I've made some tinkering and when I'm using CCminer 1.7.xx, I have less computer hashes, but more at pool + more coins mined.

When I'm using CCminer 2.x, I have an increase of computer hashes, but a really, really, really low pool hashes and almost no income... ( like maximum 25% of hashing power )

Do you have any idea what could cause that?

Using 6x 1060 6g rigs, and waiting to buy another batch, I would like to have an answer if possible.

Developper(s) can talk to me into private if a 0.05 btc is needed to even get more results, but I need to see if there is a real difference to buy at that price compared to a stable CCminer version for Myriad-Groestl mining.

Thank you

Bump

[Brucelats]

Gigabyte g1 gaming 1070. Samsung memory
Driver : 394.84 (important)
Os: windows 8.1
tdp: 100%
memclock -500
coreclock +150
Default intensity (no -i parameter specified in the batfile)

Hashrate 31.5 Mhash with sp-mod #6

I dont use ur SP, i am not donator and i dont try to find it another way.
I think u can push a little bit your 1070, try to lower memclock by 1000 and push a little bit your coreclock mb +10/20, u grab nothing from memclock.
I use ASUS 1070 8OG ( more hard to find sweep spot )
i can run them stable at 130/140 CoreClock - -2000MemClock ( i use linux so -1000 for win user ) and grab 30.3/30.8 on krnlx mod, i dont try the palgin new release from 2 day cause only win release

Minimum mem clock on windows is -500.

And your coreclock of 130/140 on linux is probably 65/70 on win? or?

Also, problem with Asus DUAL OC 8gb is they dont have so badass cooling like 3 fan cards etc. If i put them to higher Power limit then 65 or 70% they heat a lot. I try to keep them under 60 degrees.


Cheers!

[alel]

You can go -1000 on windows actually, use nvidia inspector

[ujin]

same setting, my hashrate
1080ti mod6 < mod5
1060 3g mod6 > mod5

[mystere_miner]

Ugh...  spmod 6 continues to crash my rig, while the krnlx version runs at nearly the same speed and runs very stable. 

Clearly, the problem here is not my rig.  Otherwise the krnlx miner would crash as well, since it's drawing the same amount of power (actually, krnlx uses less CPU). 

sp_ - I sent you a crashdump analysis a few days ago about this problem... can you look into it?

[droghtak]

Nexus sp-mod private #7 beta
sendt to the nexus donators, please check your spam folders.

I haven't found a block yet with this build. Please test.

- Improved performance on celeron rigs.
- Improved launchconfig on all cards.
- Device selection similar to the -d parameter in ccminer. Seperate by comma.
- Default intensities displayed (0 intesity will turn on default).
- Improved Meter with less fluctating hashrates.
- Improved stability

Thank you.

Feedback: I can't use any intensity over 62, not even with a single 1080 Ti with 32GB pagefile and 8GB RAM.

So I get about 181 Mh/s at 180 watts (60% PL) or 202 Mh/s at 300 watts (100% PL).

With majoh's miner I can use super high intensities like 200 which gives me 208 Mh/s at 60% and 251.5 Mh/s at 100%.

Seems like your miner is a 32-bit binary while majoh's is 64 bit which is what I'd guess allows for higher intensities.

I'm sorry to bump this old post but, how do you manage to run the majoh's miner ?
I can't run more than 3 1080ti's per rig, I've played with intensity (fifth parameter of skminer, right?) ranging from 1 to 200 and my system freezes always. I have 8GB ram, 30GB virtual mem but its a shitty celeron running on a pro btc 2.0...

my last batch is something like:
skminer.exe  127.0.0.1 9325 6 10 32

if i put 6 (or anything higher than 3) it crashes the system badly ...

[lupanar]

Sp-mod #6 can run with -i 25 on the 1060 3gb  (both x86 and x64 build)

and -i 26 on the gtx 1070 (with the x64 exe)

Have 15.5 with 1060 3gb and -i 25 at tdp 60(cant run more tdp due to weak PSU). Have some speed increase, thanks

[sp_]

Ugh...  spmod 6 continues to crash my rig, while the krnlx version runs at nearly the same speed and runs very stable.  

The krnlx version is broken. You only get 75% of the speed the miner displays in the console window on the pool. (tested on suprnova.cc)

[sp_]

x32 SPMOD6 is same speed as CWIGM, all the same settings
1850 Core 850 MV across all cards 25.5 Intensity

CWIGM is locked to mine on a pussy pool. Slow connection, alot of lag and downtime. Few blocks found. Slow payouts.

Stick to the sp-mod if you want profit..

[sp_]

Have 15.5 with 1060 3gb and -i 25 at tdp 60(cant run more tdp due to weak PSU). Have some speed increase, thanks

40% less power (to save 38 watt) , 20% less hash.

I am getting 19.5 on the 1060 3gb and 20.5 on the 1060 6gb with sp-mod #6 100% tdp and oc.