CCminer(SP-MOD) Modded GPU kernels.

[sp_]

Managed to remove another percent in Echo. Also merged simdcode(tsiv) from the mainbranch. It does give a small boost. Downloaded and compiled with the latest nvidia drivers. Will recieve a 980 and 970 card hopefully tomorrow. Test and build a new beta / check in sourcecode. (linux will be supported as well)

[djm34]

Managed to remove another percent in Echo. Also merged simdcode(tsiv) from the mainbranch. It does give a small boost. Downloaded and compiled with the latest nvidia drivers. Will recieve a 980 and 970 card hopefully tomorrow. Test and build a new beta / check in sourcecode. (linux will be supported as well)

It looks to me you are just making a private (pay per use... I guess) miner with everybody else source...
Do you really expect that other people continue to open source for you ?

[sp_]

Managed to remove another percent in Echo. Also merged simdcode(tsiv) from the mainbranch. It does give a small boost. Downloaded and compiled with the latest nvidia drivers. Will recieve a 980 and 970 card hopefully tomorrow. Test and build a new beta / check in sourcecode. (linux will be supported as well)

It looks to me you are just making a private (pay per use... I guess) miner with everybody else source...
Do you really expect that other people continue to open source for you ?

PPL don't pay per use. I will release my source. My miner is free.

[Amph]

The key is consumpution , its not profitable with that overclocking to 9mhs in my opinion.

it shouldn't change too much the ratio remain 1:1

not really my dear... the dissipation loss is not linear. there is always a sweet spot and up to it get's worse.
btw. checked some EVGA 980 SC ACX 2.0 cards. powerful - but the 750ti is still the hash/wattage hero so far.

750ti are not good for density, you may find that running a farm with 3:1 less "ring ratio" is better

[PVmining]

The key is consumpution , its not profitable with that overclocking to 9mhs in my opinion.

it shouldn't change too much the ratio remain 1:1

not really my dear... the dissipation loss is not linear. there is always a sweet spot and up to it get's worse.
btw. checked some EVGA 980 SC ACX 2.0 cards. powerful - but the 750ti is still the hash/wattage hero so far.

750ti are not good for density, you may find that running a farm with 3:1 less "ring ratio" is better

I'm with you, and this was one of the reasons for me buying some 980. but the density is a completly different argument.
sadly the costs for energy is not to ignore - at least not for me.

[Amph]

well yes i'm not buying any right now, not worth it with this current situation, was just for the sake of argument

[sp_]

I have ordered a 980 and a 970 card today. My code is only optimized for the 750ti, but I compiled with compute 5.2 in the latest version. The 980 card is too expensive to ROI with the current hashrate.
My goal is to push the 970 up to 10 and the 980 up to 12. and the TI up to 3.5. All base clocks.

But it will take time. I am already working fulltime as a programmer, so this project is done in the weekends/afternoons.

Dont worry of ROI , i think we all could make some donation if your miner got actual optimization , i personally promise that i will make a donation more than 0.2 btc if you push my 750ti from 2.82(now)to 3.0↑ steady.

Plus , if you got the hashrate 50%↑ and opensource ,you will be listed in the Hall Of Fame in BTC hitory like sph , christian etc.  Well , or you can make grands of $ like claymore or yvg 1900 closesource.

Claymore is a lamer. I work for beer. My hourly payment is below 2$ with the current donations. Funny that some ppl. get angry when I hand out free Hash. Perhaps they have made a private miner like the Wolf (of wallstreet)

[sp_]

you want to see something optimized:

http://www.youtube.com/watch?v=pu3O-FtyzfQ

50mhz hardware from 1994. realtime

[djm34]

I have ordered a 980 and a 970 card today. My code is only optimized for the 750ti, but I compiled with compute 5.2 in the latest version. The 980 card is too expensive to ROI with the current hashrate.
My goal is to push the 970 up to 10 and the 980 up to 12. and the TI up to 3.5. All base clocks.

But it will take time. I am already working fulltime as a programmer, so this project is done in the weekends/afternoons.

Dont worry of ROI , i think we all could make some donation if your miner got actual optimization , i personally promise that i will make a donation more than 0.2 btc if you push my 750ti from 2.82(now)to 3.0↑ steady.

Plus , if you got the hashrate 50%↑ and opensource ,you will be listed in the Hall Of Fame in BTC hitory like sph , christian etc.   Well , or you can make grands of $ like claymore or yvg 1900 closesource.

Claymore is a lamer. I work for beer. My hourly payment is below 2$ with the current donations. Funny that some ppl. get angry when I hand out free Hash. Perhaps they have made a private miner like the Wolf (of wallstreet)

except you are getting donation for mostly the work of others and releasing binaries only by pm...
(not sure I ever got 2$/h for what I have done...)

[sp_]

I have ordered a 980 and a 970 card today. My code is only optimized for the 750ti, but I compiled with compute 5.2 in the latest version. The 980 card is too expensive to ROI with the current hashrate.
My goal is to push the 970 up to 10 and the 980 up to 12. and the TI up to 3.5. All base clocks.

But it will take time. I am already working fulltime as a programmer, so this project is done in the weekends/afternoons.

Dont worry of ROI , i think we all could make some donation if your miner got actual optimization , i personally promise that i will make a donation more than 0.2 btc if you push my 750ti from 2.82(now)to 3.0↑ steady.

Plus , if you got the hashrate 50%↑ and opensource ,you will be listed in the Hall Of Fame in BTC hitory like sph , christian etc.   Well , or you can make grands of $ like claymore or yvg 1900 closesource.

Claymore is a lamer. I work for beer. My hourly payment is below 2$ with the current donations. Funny that some ppl. get angry when I hand out free Hash. Perhaps they have made a private miner like the Wolf (of wallstreet)

except you are getting donation for mostly the work of others and releasing binaries only by pm...
(not sure I ever got 2$/h for what I have done...)

Look, I optimized a couple of kernals, made the exe public and people get more money. My current miner is breaking compability with the old ones. Submitting the code will create bugs/ prevent old cards to work. I have now fixed some bugs. Soon ready to publish the sourcecode.

[sp_]

3lit3:

http://www.youtube.com/watch?v=a706CPeXJdM

[sp_]

If you think u are good beat this:

http://www.youtube.com/watch?v=a663UUGSJ6s

gpu@1mhz

[sp_]

I have ordered a 980 and a 970 card today. My code is only optimized for the 750ti, but I compiled with compute 5.2 in the latest version. The 980 card is too expensive to ROI with the current hashrate.
My goal is to push the 970 up to 10 and the 980 up to 12. and the TI up to 3.5. All base clocks.

But it will take time. I am already working fulltime as a programmer, so this project is done in the weekends/afternoons.

Dont worry of ROI , i think we all could make some donation if your miner got actual optimization , i personally promise that i will make a donation more than 0.2 btc if you push my 750ti from 2.82(now)to 3.0↑ steady.

Plus , if you got the hashrate 50%↑ and opensource ,you will be listed in the Hall Of Fame in BTC hitory like sph , christian etc.  Well , or you can make grands of $ like claymore or yvg 1900 closesource.

Claymore is a lamer. I work for beer. My hourly payment is below 2$ with the current donations. Funny that some ppl. get angry when I hand out free Hash. Perhaps they have made a private miner like the Wolf (of wallstreet)

Hey, I like competition. While it may cut into profits a bit, I enjoy having someone to compete with.

You are good. And I know that what you post is real.
Happy mining!

[sp_]

Here is beta number 3. Quark is fixed, but jackpotcoin is still broken.

Improved performance on all algorithms. Nist5/x11/x13/x15. This forked version should run around 8-10% faster than tpouvet release 1.4.6 when mining x11 on the 750ti. I haven't tested the 970 and 980.(I am waiting for my cards to arrive in the mail.)
For best results mine on a pool with vardiff or set the difficulty high. Remember to install the latest NVIDIA drivers. (22-oct-2014)


http://www.filedropper.com/ccminerspbeta3

If you want more hash, please donate

Happy hashing!

[jpouza]

Here is beta number 3. Quark is fixed, but jackpotcoin is still broken.

Improved performance on all algorithms. Nist5/x11/x13/x15. This forked version should run around 8-10% faster than tpouvet release 1.4.6 when mining x11 on the 750ti. I haven't tested the 970 and 980.(I am waiting for my cards to arrive in the mail.)

http://www.filedropper.com/ccminerspbeta3

If you want more hash, please donate

Happy hashing!

ccminer50 still the same here with 750Ti.
ccminer52 improved a little to 8.5-8.6MH/s with 980GTX.

Cheers

[sp_]

Try NIST5 (talkcoin). Seems to be a memory issue with more than 4 cards one of my rigs is crashing. (6 750ti cards)

[jpouza]

x11

sube

[sp_]

Looks good, but I get more hash on 750ti. Did you install the latest cudadriver (22-oct-2014) (344.48). Also delete the file cudart35_65.dll or cudart35_55.dll if you have it in the ccminer folder

[sp_]

fixed the issue with more than 4 cards. (750ti)

http://www.filedropper.com/ccminerspbeta4

[mmmaybe]

Nice work you are doing