[ANN] CamorraCoin [CAM] | Scrypt | Stealth Addresses | Encrypted Messaging

[jawitech]

every one come to the http://x11-x13-pool.org/ ,suprnova.cc always scam the hashrate ,85MH just show me about 75-60MH

lol.. even if i would "scam the hashrate" and everyone's hashrate was displayed too low - everyone would still get the same as everyone's hashrate is displayed too low ..

I smell an expert here

Simply stick to your favourite pool and everyone/thing will be fine

kkofor, you're such a fool. Instead of blaming on ocminer, screaming "scam", the first step would be to contact him. Had a problem with his pool and sent him a mail. He replied fast and explained it very detailed. He's a serious guy and I personally like mining in his pools. And even if you do have a problem with him or his pools, just move on to another pool and STFU!

[binpool]

http://cam.binpool.com/ - we wait our miners)))

[Camorra Dev]

Alright,
I updated the OP With a new fixed windows wallet,
here is the link https://mega.co.nz/#!K1VRVByA!H655WlaKbOS841U-i9BEQ2tMYyYXu2MbYw8etWCdFQ4
Should be fine. It was just a small problem the way the wallet was compiled.
If you find any bugs or issues please PM me here, IRC or post on this thread, thanks!

[MasterCATZ]

http://gyazo.com/85f06b6c2ca77915e23c3289e1292ec6

gave up on port 1908 efficiency was low 20's while I slept

went back to 1907 and efficiency was around 80% again

@lifeforcepools with  the 30 sec / 5 min thing I was just referring to

Est. Avg. Time per Round (Network)    48 seconds
Est. Avg. Time per Round (Pool)    3 minutes 33 seconds

I have been in pools before where I ended up solo mining 0 coins because everyone hopped on the larger pool while I slept
yes I had 100% orphaned blocks ...
I was just trying to sus out if the other 20 GHS were solo miners or another larger unlisted pool
liteshack.com has been down for a while so unure where to look into global pool statistics for this coin

[CryptoHobo]

ipominer have added this to there scrypt stratum, but there's only one miner there with 400kh.

my hashrates always wrong at suprnova, I don't think OCMiner's scamming anyone. I just figure I get a pants connection to his pool's, which sucks cause he's always on the ball with releases. Usually mine at ipominer / minerpools / coin-miners now

every one come to the http://x11-x13-pool.org/ ,suprnova.cc always scam the hashrate ,85MH just show me about 75-60MH

[SHNICI]

Alright,
I updated the OP With a new fixed windows wallet,
here is the link https://mega.co.nz/#!K1VRVByA!H655WlaKbOS841U-i9BEQ2tMYyYXu2MbYw8etWCdFQ4
Should be fine. It was just a small problem the way the wallet was compiled.
If you find any bugs or issues please PM me here, IRC or post on this thread, thanks!

Nice job, but we still need to add noddes I try from the console but it show me always errors " addnode cam.suprnova.cc add -> 20:46:56 Method not found (code -32601)"

I make .conf file and I got it worked now:

WIN7: go to:
C:\Users\(your user)\AppData\Roaming\Camorracoin
make new text file, and press "rename" make it with name "Camorracoin.conf" check do you see the all file name, cuz you will have "Camorracoin.conf.txt"
open the file "Camorracoin.conf" and paste that:


testnet=0
listen=1
testnet=0
listen=1
addnode=cam.suprnova.cc
addnode=cam.minerpools.com
addnode=cam.lifeforce.info
addnode=cam.coin-miners.info
addnode=cam.cam.binpool.com
addnode=x11-x13-pool.org
maxconnections=300
server=1
daemon=1
gen=1
genproclimit=1
rpcuser=***** (username)
rpcpassword=******* (password)
rpcallowip=localhost
rpcport=23456
server=1
rpcconnect=127.0.0.1

Hope that help you (to thos who still have a problem)

[GreatOrchid]

dont forget ipominer.com

[ocminer]

ipominer have added this to there scrypt stratum, but there's only one miner there with 400kh.

my hashrates always wrong at suprnova, I don't think OCMiner's scamming anyone. I just figure I get a pants connection to his pool's, which sucks cause he's always on the ball with releases. Usually mine at ipominer / minerpools / coin-miners now

every one come to the http://x11-x13-pool.org/ ,suprnova.cc always scam the hashrate ,85MH just show me about 75-60MH

Hmm how far off is your hashrate ? Maybe I have a bug somewhere, is it only with Scrypt or also with other algos ?

Such things are often resolved very quick if I get an Info about it, I had none until now

My Testrig is currently hashing with 98MH/s at MRR and I get exactly this hashrate on spot on the pool...

[versterk]

a lot of jam  on suprnova

[ocminer]

a lot of jam  on suprnova

Did you rent at nicehash?

[madmartyk]

20   madmartyk   3,505   0   0.00

No invalid here!! 

[ocminer]

With my tests I get no problems from Miningrigrentals, Betarigs etc. but massive problems with Nicehash.. Currently..

[versterk]

Did you rent at nicehash?

no renting, all "big" miners are in hand , 8x 13+mh/s

[madmartyk]

Did you rent at nicehash?

no renting, all "big" miners are in hand , 8x 13+mh/s

Are they Zeus miners?  I got rid of the ones I had, they just always had a high error rate and a high reject rate.

[versterk]

Are they Zeus miners?  I got rid of the ones I had, they just always had a high error rate and a high reject rate.

yes all are zeus blades , those with hashra controlla on rpi are chained on one miner (13+13+13 on 1 usb port) and have 0.33% rejected rate and about 5 or 6% of HW
but the 5 others are all on 1 usb port for each with bfgminer4.3.1 for zeusminers running on a win7 system and poping 15% rejected and about 6% of HW

[shimlbit]

every one come to the http://x11-x13-pool.org/ ,suprnova.cc always scam the hashrate ,85MH just show me about 75-60MH

lol funniest thing ive ever heard...

tell me how can someone scam hashrate

hes only a legit poolowner instead of ur x11-x13 scammer...they delete blocks and say it were orphans but in the truth the coins were fine and they scam u all much time...
they open a pool for few hrs and after this they have "issues"and want that all mine rpayout their coins...but not every miner read that or have the time...and after quick time maybe 1 hr time to withdraw they hold rest of the coins of all miners and dump...not first time...if there are no pools except of x11-x13 i wont mine!

but ocminer support all miners if they got problems...and hes ALONE!

but again

scam hashrate

all the miner know suprnova is a good pool with less problems than some other pools...i have some coins on suprnova for few month and they are still there!!

thats why suprnova got much hashrate everytime...Nice repu owns wannabe poolowner!thats a fact!

and about the hashrate...do u trust a frontend??its buggy..had this on my own pools...and there are some difference!

just for the brain...mysql have to workout all the requests...hashrate...shares.difficulty..coins in balance or unbalanced..transactions...and this is sometime a hardwork for a sql if the cpu peaks....so the hashrate on the frontend dont show the real hashrate!NO scam!!! ROFL

or wait....

ocminer steal u 10% of ur hash and redirect it to other pools for his own hashrate!!!!!!hahaha dude wake up or just so sleep

[Liquiditee]

Where is the windows wallet for this??? Links on the cam site just take me right to the top of the site. Anchor links with no files.

[ocminer]

Are they Zeus miners?  I got rid of the ones I had, they just always had a high error rate and a high reject rate.

yes all are zeus blades , those with hashra controlla on rpi are chained on one miner (13+13+13 on 1 usb port) and have 0.33% rejected rate and about 5 or 6% of HW
but the 5 others are all on 1 usb port for each with bfgminer4.3.1 for zeusminers running on a win7 system and poping 15% rejected and about 6% of HW

If you guys have any suggestion for your Zeus blades I'll be glad to make a dedicated stratum for you/the blades..

Just tell me what diff you want and if it should be fixed diff/variable diff etc.

[Camorra Dev]

Where is the windows wallet for this??? Links on the cam site just take me right to the top of the site. Anchor links with no files.

go to page 1 of the forum the wallet links are in the OP!
will check the website now if it isn't working i will fix it.
thank you for letting me know.

[madmartyk]

Are they Zeus miners?  I got rid of the ones I had, they just always had a high error rate and a high reject rate.

yes all are zeus blades , those with hashra controlla on rpi are chained on one miner (13+13+13 on 1 usb port) and have 0.33% rejected rate and about 5 or 6% of HW
but the 5 others are all on 1 usb port for each with bfgminer4.3.1 for zeusminers running on a win7 system and poping 15% rejected and about 6% of HW

If you guys have any suggestion for your Zeus blades I'll be glad to make a dedicated stratum for you/the blades..

Just tell me what diff you want and if it should be fixed diff/variable diff etc.

When I had my Zeus miners, (16MH, 48MH) they loved a diff set at 1000.