[UFO] CORE 0.18.1 RELEASED!

[semajjames]

you just forgot that there is multipools out there..
how did u setup your queue,scan-time,expiry?

what is sensible scan,expiry and queue  settings for this coin at ufo.nut2pools.com

[Mainbrain]

what means this coin?

[daimyo]

what means this coin?

UFO? Means Uniform Fiscal Object 

[semajjames]

you just forgot that there is multipools out there..
how did u setup your queue,scan-time,expiry?

what is sensible scan,expiry and queue  settings for this coin at ufo.nut2pools.com

at pool, just use default settings
when solo set low values( --scan-time 1 --queue 0, expiry may not be supported with some miners anymore)
scantime is the most, why would u like your miner collect data for 30 or 60sec before sending?(not so sure about current miners how code works, hope some one to confirm is it
unnecessary to adjust scantime anymore when at solo)

Thanks I understand default as:-  scan=1 queue=0, expiry=1

correct ?

[spinladen]

Ive posted many a time in the old threads...this coin has its heart in the right place, but I could have taken this coin literally to orbit 10xs over by now.  Unfortunately my time is spread thin with bill paying work & have little time to do anything for a coin that refuses to lift off.   Id be glad to consult my ideas with whoever is sleeping in the marketing dept.   Msg me before we get low volume delisted....sheesh

[Hippie Tech]

WTF is going on with this damn algo !?

cgminer 3.7.8 crashes whenever I attempt to solo mine UFO.

Code:

Faulting application name: cgminer.exe, version: 0.0.0.0, time stamp: 0x5456b3d7
Faulting module name: cgminer.exe, version: 0.0.0.0, time stamp: 0x5456b3d7
Exception code: 0xc0000005
Fault offset: 0x0000cb1e
Faulting process id: 0x141c
Faulting application start time: 0x01d0038d18aec41f
Faulting application path: C:\cgminer-3.7.8-neoscrypt\cgminer.exe
Faulting module path: C:\cgminer-3.7.8-neoscrypt\cgminer.exe
Report Id: 592924e0-6f80-11e4-bc9a-3085a98ead79

Yet the "updated" neoS.cl appears to work with cgminger 3.7.7b..  I say "appears" because it failed to register/credit me with that 66.2k block finding share.



Where the hell did my hashpower and the block it found, go ?

Never A Straight Answer.

[btctradingonline]

some pools die and no worker, what's going on net hash rate so high 100-> 140M ?

only nut2's hash ~ 8M, that's good now

[spinladen]

Watching this coin die a slow death a 2nd time around is quite painful, but I can't look away.  Its like a slow motion car wreck, but the driver has an oblivious smile on his face while stepping full on the gas as the car veers towards a cliff.  The "devs" care too much of ufos and not enough of the coin to promote such things.  Either that or they are busy getting ready to abduct all our btc with another dump downwards.  But at this current rate, this coin is delisted by new years due to lack of volume OR interest.  Just 1 whale trading back n forth with himself.   yippeee.



Sell everything you got now n save yer money, this ship is going down.

[daimyo]

Watching this coin die a slow death a 2nd time around is quite painful, but I can't look away.  Its like a slow motion car wreck, but the driver has an oblivious smile on his face while stepping full on the gas as the car veers towards a cliff.  The "devs" care too much of ufos and not enough of the coin to promote such things.  Either that or they are busy getting ready to abduct all our btc with another dump downwards.  But at this current rate, this coin is delisted by new years due to lack of volume OR interest.  Just 1 whale trading back n forth with himself.   yippeee.



Sell everything you got now n save yer money, this ship is going down.

hey, its you again

[RD965]

Watching this coin die a slow death a 2nd time around is quite painful, but I can't look away.  Its like a slow motion car wreck, but the driver has an oblivious smile on his face while stepping full on the gas as the car veers towards a cliff.  The "devs" care too much of ufos and not enough of the coin to promote such things.  Either that or they are busy getting ready to abduct all our btc with another dump downwards.  But at this current rate, this coin is delisted by new years due to lack of volume OR interest.  Just 1 whale trading back n forth with himself.   yippeee.



Sell everything you got now n save yer money, this ship is going down.

hey, its you again

hahah spinladen says everything!

So guys can I get some help on my R9280X VAPORX TRIX? Cant past 75mh

Is it strictly neccesary that I downgrade my drivers? I am on win 8.1 with latest catalyst drivers

[daimyo]

So guys can I get some help on my R9280X VAPORX TRIX? Cant past 75mh

Is it strictly neccesary that I downgrade my drivers? I am on win 8.1 with latest catalyst drivers

Mate, thats very poor performance. Are you sure you are using the proper miner? Its has been undergoing significant upgrades.

As far as the config goes... cisahasa can tell. He has 280X.

I am getting 119khs on my R9 270.

https://drive.google.com/file/d/0B06N0FYvyFgDMWJ3b1F6VHpoZnc/view

[RD965]

So guys can I get some help on my R9280X VAPORX TRIX? Cant past 75mh

Is it strictly neccesary that I downgrade my drivers? I am on win 8.1 with latest catalyst drivers

Mate, thats very poor performance. Are you sure you are using the proper miner? Its has been undergoing significant upgrades.

As far as the config goes... cisahasa can tell. He has 280X.

I am getting 119khs on my R9 270.

https://drive.google.com/file/d/0B06N0FYvyFgDMWJ3b1F6VHpoZnc/view

Cheers mate 

[RD965]

280x  320khs:
sgminer.exe -k neoscrypt --thread-concurrency 8192 --rawintensity 6144 --worksize 256 -g 4 --lookup-gap 2

Is that stable enough?

[RD965]

100% stable if your clock speed is not too high
( elpida around 1050, hynix around 1100)
elpida cant go 320khs but hynix does

Allright thanks! Mine runs at 1100 like a charm! Ive been using w64 and g 2 in my config and getting stable 275

So you think just changing those will work?

[RD965]

100% stable if your clock speed is not too high
( elpida around 1050, hynix around 1100)
elpida cant go 320khs but hynix does

Allright thanks! Mine runs at 1100 like a charm! Ive been using w64 and g 2 in my config and getting stable 275

So you think just changing those will work?

use xI or raw

Im using as always I 13 and its giving me stable 265

[RD965]

xI or raw will give u 320khs
i 13 will not work
optimal for 280x:
--thread-concurrency 8192 --rawintensity 6144 --worksize 256 -g 4

Well those settings dont really work for me!

[RD965]

then u are doing something wrong
post config and drivers etc etc..

14.4 win8.1 x64

"intensity" : "13",
"worksize" : "64",
"kernel" : "neoscrypt",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "2048",
"gpu-threads" : "2",
"gpu-engine" : "1100",
"gpu-fan" : "0-75",
"auto-fan" : true,
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "80",
"temp-target" : "70",
"no-pool-disable" : true,
"kernel-path" : "/usr/local/bin"

[RD965]

use 14.6rc2 dll

What you mean?

[RD965]

use 14.6rc2 dll

What you mean?

  "lookup-gap": "2",
  "rawintensity": "6144",
  "thread-concurrency": "8192",
  "worksize": "256",
  "gpu-threads": "4",

and place 14.6rc2 files in miners folder(sg 5.1dev)
https://drive.google.com/file/d/0B06N0FYvyFgDQUdQTjVJeC0xblk/view?usp=sharing
(easyer than updating drivers)

miner working with xi/raw(there is build out there that will not)
this one has dlls already
" It includes AMD OCL DLLs from Catalyst 14.6 RC2 (OpenCL 1.2 AMD-APP (1526.3)) and the latest Wolf0 kernel from github.

It includes some bat and vbs files I use to auto delete bins and set environmental variables.

Also has other small fixes from sgminer devs that aren't neoscrypt related"
https://drive.google.com/file/d/0B06N0FYvyFgDMWJ3b1F6VHpoZnc/view?usp=sharing

Thanks mate

281khs so far

"rawintensity" : "6144",
"worksize" : "256",
"kernel" : "neoscrypt",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "2048",
"gpu-threads" : "4",
"gpu-engine" : "1100",
"gpu-fan" : "0-75",
"auto-fan" : true,
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "80",
"temp-target" : "70",
"no-pool-disable" : true,
"kernel-path" : "/usr/local/bin"

Using your miner and the files you gave me I also copied them

[RD965]

sounds like elpida card