[UFO] CORE 0.18.1 RELEASED!

[x0n4r]

Dear Community.
I am seriously interested in the health of your ufos.
Our farm monitoring system finds that coinexchange.io are unreachable. It could be a momentary problem but it is not under our jurisdiction.
If you are a trader, always make your exchanges and then return immediately your ufos into your wallets.
It must not happen that your ufo has gone missing. Never.
Take care of your coins, always.

xonar


data: https://twitter.com/CoinExchangeio
no twits

[x0n4r]

Update, now reachable.
Have a nice day.

[Tara11]

Any working nodes? I can't sync.

If you have problems syncing your wallet, in your wallet go to Help - Debug window  - Console   add the line:   addnode node1.ns0.it and hit enter

It will be hardcoded in the next wallet version

I tried that but still no connection.

[x0n4r]

Are you under Windows ? Mac ? Ubuntu ? Debian?...

If you are using a QT (graphic) classic windows wallet, verify your windows firewall setting and allow the ufocoin wallet to use the private and public network.

Again, close and reopen your wallet.
Go into your drop down menu wallet : Help - Debug window - Console - and into the bottom line, type:   addnode   node1.ns0.it   add   (and hit enter)

Let us know

[Tara11]

Are you under Windows ? Mac ? Ubuntu ? Debian?...

If you are using a QT (graphic) classic windows wallet, verify your windows firewall setting and allow the ufocoin wallet to use the private and public network.

Again, close and reopen your wallet.
Go into your drop down menu wallet : Help - Debug window - Console - and into the bottom line, type:   addnode   node1.ns0.it   add   (and hit enter)

Let us know

I'm using windows installer. I tried all above still no connection.

[manucrypt]

I'm using windows installer. I tried all above still no connection.

Hi Tara, possibly the node given in the post above has more spaces. Try again copying the one below.

Copy this:     addnode node1.ns0.it add

Open the wallet > Help > Debug Window > Console > Paste the above in the bottom field > Hit Enter

Wait a little and you will see the wallet synchronizing. It takes a couple of hours to sychronize with the blockchain fully, it will though.

[daimyo]

Any working nodes? I can't sync.

try these nodes

Code:

addnode=2a02:c7f:5052:f800:cc27:649f:448f:49e9
addnode=151.224.81.60
addnode=107.185.79.115
addnode=2001:41d0:2:8b92
addnode=188.165.194.146
addnode=90.3.172.30
addnode=85.216.152.49
addnode=34.225.224.198
addnode=192.99.0.112
addnode=149.202.102.73
addnode=51.254.196.222
addnode=37.45.177.108
addnode=77.110.148.150
addnode=67.174.248.255
addnode=85.73.211.192
addnode=210.187.246.15
addnode=40.118.164.56
addnode=87.0.9.137
addnode=97.70.98.0
testnet=0

[Tara11]

I'm using windows installer. I tried all above still no connection.

Hi Tara, possibly the node given in the post above has more spaces. Try again copying the one below.

Copy this:     addnode node1.ns0.it add

Open the wallet > Help > Debug Window > Console > Paste the above in the bottom field > Hit Enter

Wait a little and you will see the wallet synchronizing. It takes a couple of hours to sychronize with the blockchain fully, it will though.

Thanks. My wallet started syncing.

[Tara11]

Any working nodes? I can't sync.

try these nodes

Code:

addnode=2a02:c7f:5052:f800:cc27:649f:448f:49e9
addnode=151.224.81.60
addnode=107.185.79.115
addnode=2001:41d0:2:8b92
addnode=188.165.194.146
addnode=90.3.172.30
addnode=85.216.152.49
addnode=34.225.224.198
addnode=192.99.0.112
addnode=149.202.102.73
addnode=51.254.196.222
addnode=37.45.177.108
addnode=77.110.148.150
addnode=67.174.248.255
addnode=85.73.211.192
addnode=210.187.246.15
addnode=40.118.164.56
addnode=87.0.9.137
addnode=97.70.98.0
testnet=0

Thanks. I'm syncing UFC coin for the first time. It's always been on exchange.

[manucrypt]

I recommended to mine with a pool but you can solo mining with your wallet adding gen=1 into the ufo.conf file
The ufo.conf text file live into the same directory where you find the wallet.dat file
Normally in a classic windows 10:  C:\Users\yourwindowsnick\AppData\Roaming\UFO
If your platform are Linux/Unix/Solaris like, you can find it into your /home/yourLinuxNick/.ufo directory
You can find an example of the ufo.conf file here: http://ufocoin.co/pgs/conf.html#conf
For a pool mining you can mine with your Android: http://ufocoin.it/silos/How_to_mine_UFO_Coin_in_a_flash.pdf
Normally mining pools have setup guides to mining each coin.
Take in mind this is a powerful Neoscrypt coin and the rules to mining it are not completely like with the script coins.

Let me know

Hi, I tried to solo mine UFO coins but could not do it!

>I used this miner nsgminer-win64-0.9.2.
>I created a conf file ufo.conf and placed it in the location mentioned above with the following code and updated addnodes:

rpcusername=username
rpcpassword=password
rpcallowip=127.0.0.1
daemon=1
server=1
gen=1
rpcport=9888
port=9887
addnode=node1.ns0.it
addnode=188.165.194.146
addnode=51.254.45.117
addnode=178.121.74.77
addnode=107.185.79.115
addnode=90.3.172.30
addnode=142.161.181.75
addnode=107.200.32.249
addnode=2602:306:bc82:f90:d808:df6b:b37f:50a
addnode=34.225.224.198
addnode=192.99.0.112
addnode=149.202.102.73
addnode=2001:41d0:a:18d3::
addnode=2001:41d0:2:8b92::
addnode=37.187.24.211
addnode=213.45.94.168
addnode=213.45.94.168
addnode=24.11.45.99
addnode=80.143.191.85
addnode=2a02:c7f:5052:f800:b0e8:f5bf:94dc:9c62
addnode=151.224.81.60

>I started the UFO wallet synced to now.
>I created a bat file inside the miner's folder with the following code:

nsgminer -o http://127.0.0.1:9888 -u username -p password \
    --coinbase-addr UFO wallet address \
    --coinbase-sig "This is manucrypt's block!"

Miner did not start and I am not sure if the wallet got connected as an active peer.
I am not sure what is going wrong. Is it the miner or the code that I should change?
Windows - AMD graphics card


Thank you

[daimyo]

I guy on the reddit forum did a youtube video on how to mine UFO. Did you check it out?

[manucrypt]

Hi! No I haven't seen it. I searched reddit and youtube but could not find it. Is it a video for solo mining or pool mining?

If you have the post link would be helpful if it is a relative video for solo mining.

[daimyo]

Hi! No I haven't seen it. I searched reddit and youtube but could not find it. Is it a video for solo mining or pool mining?

If you have the post link would be helpful if it is a relative video for solo mining.

No, you haven't
https://www.reddit.com/r/ufocoin/comments/6hyxz1/need_help_with_mining/?st=j49v1l7l&sh=039ce359

I think its pool mining. You want solo?

[manucrypt]

Thanks for the link. It is a video for pool mining.

I am i interested in trying solo mining. Could you please help me on that one?

I will send the coins of the first block I find, 1250 UFOs to the person who will make solo mining work for me. Provide your UFO address.

On page 31 I have described the steps I followed but did not make the miner to solo mine.

[daimyo]

Thanks for the link. It is a video for pool mining.

I am i interested in trying solo mining. Could you please help me on that one?

I will send the coins of the first block I find, 1250 UFOs to the person who will make solo mining work for me. Provide your UFO address.

On page 31 I have described the steps I followed but did not make the miner to solo mine.

Dont waste time, mate. Fire it up on pool mining until you find out about solo

[manucrypt]

Mate, I can fire it up for pool mining anytime. And I have already. I can be the 10th on the contributor hashrates table of the hub.

Check it: https://ufocoin.miningpoolhub.com/index.php?page=statistics&action=pool

However I prefer solo for now, since the difficulty and value of UFO are still low.

[x0n4r]

ok

(windows)
. stop your nsgminer.
. start your wallet with your ufo.conf file in the location mentioned above, with the gen=1 parameter within.

verify please with your task manager if after few minutes your cpu start to increase.

if yes, you are solo mining.
no coin mined? low hardware for ufo solo mining.

low hardware for ufo solo mining?
start nining with a pool


: )

[x0n4r]

As I read above you're an expert miner.
If you have the know how, setup a pool locally into your intranet.
Use your Dig pointing it to you private pool.

You are solo mining with your private pool.

[manucrypt]

ok

(windows)
. stop your nsgminer.
. start your wallet with your ufo.conf file in the location mentioned above, with the gen=1 parameter within.

verify please with your task manager if after few minutes your cpu start to increase.

if yes, you are solo mining.
no coin mined? low hardware for ufo solo mining.

low hardware for ufo solo mining?
start nining with a pool


: )

If I start my wallet with ufo.conf in place, then am I cpu mining or gpu mining?
I prefer gpu solo mining since cpu is not good enough for mining..

[x0n4r]

With gen=1 you go in CPU mining.

I think if you have a GPU dig, you need to setup a local private pool.
You maybe find more info about it at forum.feathercoin.com because UFO and FTC are neoscrypt sisters...

Regards