S3+ B11 boot problems

[Codemeister]

Hey all,

I have a S3+ B11 right here which stopped working. I'm not sure why, but after I changed the IP I cannot connect to the machine anymore. I tried resetting the machine but nothing worked. The green LED and the red LED are on (not blinking, both just on). When I run a network scan I can see the IP from the machine, but I cannot ping it or connect to it.

I tried a crossover cable, setting a static IP to my computer and connecting it 1on1, tried resetting it.... I got no ideas left. Do you guys have any suggestions or ideas?

Edit: when I try resetting the machine, the LEDs just stay on.

After reading pretty much all related posts on Bitcointalk, still no working solution for this issue. Help!

[1713578322]

1713578322

[1713578322]

1713578322

[1713578322]

1713578322

[Nite]

do you have it connected through a router? the router should show what network IP its using

[Codemeister]

Yes I did find out it is using 192.168.0.180 in a IP scanning tool, but I cannot ping or reach it. Cannot reset, as that button does nothing...

[aurel57]

Maybe you should have posted this in the "S3 support thread" so they can help you. https://bitcointalk.org/index.php?topic=671189.0 

[MyRig]

PM Sent!!

Hey all,

I have a S3+ B11 right here which stopped working. I'm not sure why, but after I changed the IP I cannot connect to the machine anymore. I tried resetting the machine but nothing worked. The green LED and the red LED are on (not blinking, both just on). When I run a network scan I can see the IP from the machine, but I cannot ping it or connect to it.

I tried a crossover cable, setting a static IP to my computer and connecting it 1on1, tried resetting it.... I got no ideas left. Do you guys have any suggestions or ideas?

Edit: when I try resetting the machine, the LEDs just stay on.

After reading pretty much all related posts on Bitcointalk, still no working solution for this issue. Help!

[Codemeister]

Follow-up on this issue: controller board has been sent to Bitmain for replacement.

[pak13]

Please post when you get it working. It will be interesting to know support times, repair times, shipping times and therefore overall down time.