[ANN] [SUP] Supcoin, PLUCK algorithm, Just Launched, Mine Now!

[Lyricz]

Hello,
I trie the first time to mine a coin, so my questions perhabs sounds al "little" bit nooby  

I startet the Wallet-Software, and downloaded the Wolf-pluckminer (renamed to pluck.exe) to the same directory.
make an

supercoinf.conf:

rpcuser=testusername
rpcpassword=testpass
server=1

make a mining.bat:

pluck.exe -o http://127.0.0.1:4412 -O testusername:testpass

But when I start I get the massage: no payout adress provided, switch to gerwork
..and the mining starts....

;-/

It should be

Code:

pluck.exe -t <numberofCPUthreads> -o 127.0.0.1:4412 -u testusername -p testpass

No, the same problem ;-/
no payout adress provided, switch to gerwork
do I have to make anything at the Walletsoftware? ..I only installed it and have it running

Why not mine on a pool?

first time I trie it,...it´s only a test so I don´t want to register me on another Site or Pool.

[Arux]

except if you own a farm, it's already too hard to solomine

but you can perform test on the testnet.

[kitaco]

Hello,
I trie the first time to mine a coin, so my questions perhabs sounds al "little" bit nooby  

I startet the Wallet-Software, and downloaded the Wolf-pluckminer (renamed to pluck.exe) to the same directory.
make an

supercoinf.conf:

rpcuser=testusername
rpcpassword=testpass
server=1

make a mining.bat:

pluck.exe -o http://127.0.0.1:4412 -O testusername:testpass

But when I start I get the massage: no payout adress provided, switch to gerwork
..and the mining starts....

;-/

It should be

Code:

pluck.exe -t <numberofCPUthreads> -o 127.0.0.1:4412 -u testusername -p testpass

No, the same problem ;-/
no payout adress provided, switch to gerwork
do I have to make anything at the Walletsoftware? ..I only installed it and have it running

Why not mine on a pool?

first time I trie it,...it´s only a test so I don´t want to register me on another Site or Pool.

It has to be supcoin.conf not supercoinf.conf

[Arux]

and launch your test wallet with

supcoin-qt.exe -testnet

and your miner with

wolf-pluckminer-generic64.exe -o http://127.0.0.1:14412 -O <USERNAME>:<PASSWORD>

warning: testnet is on port 14412, real network is on 4412
you will save a lot of time to testing on testnet.

[elektrax]

can someone help me get the nvidia miner to work? 2x750ti's, win64. using driver 344.11
can someone with same setup confirm that theirs work?

i have a 660 in slot 0 that im not using, and the 750ti's in slot 1+2

my command is
ccminer.exe -a pluck  -o stratum+tcp://sup.suprnova.cc:7777  -u xxx.750ti -p x -d750ti#1,750ti#2 --throughput 4.,4. -f 1

this gives me bsod after a hefty driver-crashing-flickering event.

halp plox?

The 660 needs ccminer30.exe, the 750 needs ccminer.exe.

I am not using the 660 for mining. It's a desktop/gaming only card. I just mention it since it's is in the system.

[scorpio18]

can someone help me get the nvidia miner to work? 2x750ti's, win64. using driver 344.11
can someone with same setup confirm that theirs work?

i have a 660 in slot 0 that im not using, and the 750ti's in slot 1+2

my command is
ccminer.exe -a pluck  -o stratum+tcp://sup.suprnova.cc:7777  -u xxx.750ti -p x -d750ti#1,750ti#2 --throughput 4.,4. -f 1

this gives me bsod after a hefty driver-crashing-flickering event.

halp plox?

The 660 needs ccminer30.exe, the 750 needs ccminer.exe.

I am not using the 660 for mining. It's a desktop/gaming only card. I just mention it since it's is in the system.

Try to lower the --throughput

[olcaytu2005]

can someone help me get the nvidia miner to work? 2x750ti's, win64. using driver 344.11
can someone with same setup confirm that theirs work?

i have a 660 in slot 0 that im not using, and the 750ti's in slot 1+2

my command is
ccminer.exe -a pluck  -o stratum+tcp://sup.suprnova.cc:7777  -u xxx.750ti -p x -d750ti#1,750ti#2 --throughput 4.,4. -f 1

this gives me bsod after a hefty driver-crashing-flickering event.

halp plox?

The 660 needs ccminer30.exe, the 750 needs ccminer.exe.

I am not using the 660 for mining. It's a desktop/gaming only card. I just mention it since it's is in the system.

Try to lower the --throughput

my card is gt 650 m and my throught value is 0.4

You can try between 0.4 and 1.1 values for throught

[Lyricz]

and launch your test wallet with

supcoin-qt.exe -testnet

and your miner with

wolf-pluckminer-generic64.exe -o http://127.0.0.1:14412 -O <USERNAME>:<PASSWORD>

warning: testnet is on port 14412, real network is on 4412
you will save a lot of time to testing on testnet.

the same problem at testnet:

Code:

[2015-02-21 11:42:47] Binding thread 1 to cpu 1
[2015-02-21 11:42:47] 4 miner threads started, using 'pluck' algorithm.
[2015-02-21 11:42:47] Binding thread 0 to cpu 0
[2015-02-21 11:42:47] Binding thread 2 to cpu 2
[2015-02-21 11:42:47] Binding thread 3 to cpu 3
[2015-02-21 11:42:47] No payout address provided, switching to getwork
[2015-02-21 11:42:57] thread 3: 512 hashes, 0.05 khash/s
[2015-02-21 11:42:57] thread 0: 512 hashes, 0.05 khash/s
[2015-02-21 11:42:57] thread 2: 512 hashes, 0.05 khash/s

edit:

....oh, just I get 10 SUP tomy testwallet,...so the "no payout adress provided" should not be a problem

[elektrax]

can someone help me get the nvidia miner to work? 2x750ti's, win64. using driver 344.11
can someone with same setup confirm that theirs work?

i have a 660 in slot 0 that im not using, and the 750ti's in slot 1+2

my command is
ccminer.exe -a pluck  -o stratum+tcp://sup.suprnova.cc:7777  -u xxx.750ti -p x -d750ti#1,750ti#2 --throughput 4.,4. -f 1

this gives me bsod after a hefty driver-crashing-flickering event.

halp plox?

The 660 needs ccminer30.exe, the 750 needs ccminer.exe.

I am not using the 660 for mining. It's a desktop/gaming only card. I just mention it since it's is in the system.

Try to lower the --throughput

my card is gt 650 m and my throught value is 0.4

You can try between 0.4 and 1.1 values for throught

What is a value range i can try and not get bluescreen every time?
Its rather annoying since i need to restart a lot of stuff for it.
I have absolutely no problems with this setup for any other coin types.

[kitaco]

can someone help me get the nvidia miner to work? 2x750ti's, win64. using driver 344.11
can someone with same setup confirm that theirs work?

i have a 660 in slot 0 that im not using, and the 750ti's in slot 1+2

my command is
ccminer.exe -a pluck  -o stratum+tcp://sup.suprnova.cc:7777  -u xxx.750ti -p x -d750ti#1,750ti#2 --throughput 4.,4. -f 1

this gives me bsod after a hefty driver-crashing-flickering event.

halp plox?

The 660 needs ccminer30.exe, the 750 needs ccminer.exe.

I am not using the 660 for mining. It's a desktop/gaming only card. I just mention it since it's is in the system.

Try to lower the --throughput

my card is gt 650 m and my throught value is 0.4

You can try between 0.4 and 1.1 values for throught

What is a value range i can try and not get bluescreen every time?
Its rather annoying since i need to restart a lot of stuff for it.
I have absolutely no problems with this setup for any other coin types.

2.95

[tamara163]

can someone help me get the nvidia miner to work? 2x750ti's, win64. using driver 344.11
can someone with same setup confirm that theirs work?

i have a 660 in slot 0 that im not using, and the 750ti's in slot 1+2

my command is
ccminer.exe -a pluck  -o stratum+tcp://sup.suprnova.cc:7777  -u xxx.750ti -p x -d750ti#1,750ti#2 --throughput 4.,4. -f 1

this gives me bsod after a hefty driver-crashing-flickering event.

halp plox?

The 660 needs ccminer30.exe, the 750 needs ccminer.exe.

I am not using the 660 for mining. It's a desktop/gaming only card. I just mention it since it's is in the system.

Try to lower the --throughput

my card is gt 650 m and my throught value is 0.4

You can try between 0.4 and 1.1 values for throught

you can give the configuration file.bat?

[Arux]

....oh, just I get 10 SUP tomy testwallet,...so the "no payout adress provided" should not be a problem

no problem, coinbase-adress is buggy in solomine

Solo Miners!

If you are using CPU miner, please do not use the --coinbase-address flag. I'm investigating an issue where the miner doesn't properly construct blocks with the block height in the coinbase. Long story short, remove that flag to use "getwork" rather than "getblocktemplate". Getwork does not suffer from this problem and the CPU miner should work fine when using it.

you can now switch on real network (use a pool, solomine is quite impossible) and you can also delete your testwallet, he's worthless.

[olcaytu2005]

my card is gt 650 m and my throught value is 0.4

You can try between 0.4 and 1.1 values for throught

you can give the configuration file.bat?

ccminer30 -a pluck -o stratum+tcp://sup.suprnova.cc:7777 -u xxx.xxx -p xxxx --throughput 0.4 -f 1

[tamara163]

my card is gt 650 m and my throught value is 0.4

You can try between 0.4 and 1.1 values for throught

you can give the configuration file.bat?

ccminer30 -a pluck -o stratum+tcp://sup.suprnova.cc:7777 -u xxx.xxx -p xxxx --throughput 0.4 -f 1

thank you
but gt 630 m not working

[temroa]

wolf0 man you know cpus arent so strong when there is gpus so you can release it will not cause to difficulity to be more

[PVmining]

...tested coinminers the last 14hours. worked out quite well.
the blockoverview is nearly the same on both pools: last 24h = 133%

but would be nice to get some more hash to get faster block times!

Yes, it'll be really good if the hashes are spread over the pools, fees are the same on both pools so you get the same coins.

why not rise the fees on your pool to make people think about spreading the hash?

[qwep1]

Net Hashrate: 2,579.17 KH/s  wtf

[ivan1975]

Is there AMD GPU miner?

[kitaco]

Is there AMD GPU miner?

No.

[qwep1]

Surely no one will be able to release AMD GPU miner