[ANN] [SUP] Supcoin, PLUCK algorithm, Just Launched, Mine Now!

[Shadow_Runner]

And for GTX 560 is possible? [/color][/b]

Miner with bat for GTX 770 sample.

https://mega.co.nz/#!i8AWgLDL!S49na-SXW2RsM_5x9ezSZUoyNHdUZfPCM_G6vnGZi8I

GTX 560 is not possible.

[1714815660]

1714815660

[1714815660]

1714815660

[1714815660]

1714815660

[1714815660]

1714815660

[coin43.com]

SupCoin Faucet
http://faucet.coin43.com/supcoin/

Payout every 30 minutes 0.001-0.002 SUP

[antonio8]

9.7khs now with I13 w8

What card is this with ?

Have you also tried using these in you config ?  --gpu-engine 1100 --gpu-memclock 1500

I use these for my 280x and get 9.9Khs: -i 13 -w 8 --gpu-engine 1100 --gpu-memclock 1500

Someone in here has gotten their 280x to perform between 9.9Khs to just shy of 11Khs.

EDIT: With AMD Drivers 14.9

I keep getting this error



Any help any one?

[Nthused]

9.7khs now with I13 w8

What card is this with ?

Have you also tried using these in you config ?  --gpu-engine 1100 --gpu-memclock 1500

I use these for my 280x and get 9.9Khs: -i 13 -w 8 --gpu-engine 1100 --gpu-memclock 1500

Someone in here has gotten their 280x to perform between 9.9Khs to just shy of 11Khs.

EDIT: With AMD Drivers 14.9

I keep getting this error



Any help any one?

Try putting sgminer.exe in the kernel folder.

What miner are you using ?

[antonio8]

9.7khs now with I13 w8

What card is this with ?

Have you also tried using these in you config ?  --gpu-engine 1100 --gpu-memclock 1500

I use these for my 280x and get 9.9Khs: -i 13 -w 8 --gpu-engine 1100 --gpu-memclock 1500

Someone in here has gotten their 280x to perform between 9.9Khs to just shy of 11Khs.

EDIT: With AMD Drivers 14.9

I keep getting this error




Any help any one?

Try putting sgminer.exe in the kernel folder.

What miner are you using ?

From the link djm posted in the no error.

EDIT: Same error after moving.

[antonio8]

9.7khs now with I13 w8

What card is this with ?

Have you also tried using these in you config ?  --gpu-engine 1100 --gpu-memclock 1500

I use these for my 280x and get 9.9Khs: -i 13 -w 8 --gpu-engine 1100 --gpu-memclock 1500

Someone in here has gotten their 280x to perform between 9.9Khs to just shy of 11Khs.

EDIT: With AMD Drivers 14.9

I keep getting this error



Any help any one?

djm34's lazy cast to uint. Change the line in question from get_global_id(0) to (uint)get_global_id(0)

Wolf0

That is like a foreign language to me.

I have no idea where to even do that at.

[NightShade00013]

Good to see the hash has started to spread a bit beyond one pool.  I switched from coin-miners to hardcoreminers to try and spread it some more, I would suggest some others do the same or the OP remove it and put a notice not to just pick the first pool or the highest hashrate pool on the main page next to the pool listings.

With the updated AMD gpu miner I am able to get about 1.1Kh/s on a r7 270 clocked at 950Mhz core.  Can not bring the intensity up beyond 8 or they crash and with a worksize of 8 I was only getting about 800H/s.  Temp tops at about 34 but the indoor temp is 20 inside right now.  Pretty close to what an fx8350 can pull.  Should give a decent basis for someone else running something near the same or who wants to run a two part or multi pool failover.

run.bat
del *.bin
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe --config sgminer.conf

config

{
"pools" : [
        {
      "url" : "stratum+tcp://stratum.eu.sup.hardcoreminers.com:3022",
      "user" : "nightshade00013.N",
      "pass" : "L"
   },
   {
      "url" : "stratum+tcp://stratum.coin-miners.info:3637",
      "user" : "nightshade00013.N",
      "pass" : "L"
   },
        {
      "url" : "stratum+tcp://sup.suprnova.cc:7777",
      "user" : "nightshade00013.N",
      "pass" : "L"
   }
]
,
"intensity" : "8",
"worksize" : "16",
"kernel" : "pluck",
"thread-concurrency" : "256",
"gpu-threads" : "1",
"vectors" : "1",
"temp-cutoff" : "60",
"temp-overheat" : "55",
"temp-target" : "45",
"expiry" : "120",
"failover-only" : true,
"hotplug" : "5",
"failover-switch-delay" : "60",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "5",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

Mining on a pair of 6850's is basically crash city or 200H/s. . . seems they only like x11 coins at this point but they are factory overclocked and I think it has something do do with the memory speed and voltages.

[Vann]

Wolf0

That is like a foreign language to me.

I have no idea where to even do that at.

Looks like it's picking up your integrated intel graphics instead of the AMD driver. Run sgminer with the -n parameter to see if your card is detected without errors. You could try disabling the integrated graphics from the device manager.

Here is a Win x64 sgminer I compiled from djm34's updated git source:

https://mega.co.nz/#!gAFXyJKB!Zudke2WSrmHfhcXiG-urMqWurY874FFOJ43nRcuB5u8

[go6ooo1212]

I gained 10.7 kH/s with 2nd djm34's miner , without any hardware errors at clocks 1100/1500

[Nthused]

I gained 10.7 kH/s with 2nd djm34's miner , without any hardware errors at clocks 1100/1500

Do you have a link for that ?

[go6ooo1212]

I gained 10.7 kH/s with 2nd djm34's miner , without any hardware errors at clocks 1100/1500

Do you have a link for that ?

[Nthused]

new version, seems there is no hw errors anymore

http://ge.tt/88LXuwA2/v/0?c

I guess this would be the 2nd (Latest) AMD GPU sgminer for PLUCK.

[antonio8]

Wolf0

That is like a foreign language to me.

I have no idea where to even do that at.

Looks like it's picking up your integrated intel graphics instead of the AMD driver. Run sgminer with the -n parameter to see if your card is detected without errors. You could try disabling the integrated graphics from the device manager.

Here is a Win x64 sgminer I compiled from djm34's updated git source:

https://mega.co.nz/#!gAFXyJKB!Zudke2WSrmHfhcXiG-urMqWurY874FFOJ43nRcuB5u8

I get

GPU 0 AMD Radeon R9 200 Series hardware monitor enabled

1 GPU device max detected


EDIT: Same as your exanple bat

I tried yours and the miner goes to the pause screen but blank.

[Nthused]

I gained 10.7 kH/s with 2nd djm34's miner , without any hardware errors at clocks 1100/1500

Do you have a link for that ?

I can only get 9.9Khs max with my 280x even with version 2 of the AMD GPU miner hmmmm what Drivers is everyone on ? I'm on 14.9

[antonio8]

9.7khs now with I13 w8

What card is this with ?

Have you also tried using these in you config ?  --gpu-engine 1100 --gpu-memclock 1500

I use these for my 280x and get 9.9Khs: -i 13 -w 8 --gpu-engine 1100 --gpu-memclock 1500

Someone in here has gotten their 280x to perform between 9.9Khs to just shy of 11Khs.

EDIT: With AMD Drivers 14.9

I keep getting this error



Any help any one?

djm34's lazy cast to uint. Change the line in question from get_global_id(0) to (uint)get_global_id(0)

Wolf0,

If I have not said in a while how awesome you are, you are awesome.

That worked perfect.

[Vann]

Wolf0

That is like a foreign language to me.

I have no idea where to even do that at.

Looks like it's picking up your integrated intel graphics instead of the AMD driver. Run sgminer with the -n parameter to see if your card is detected without errors. You could try disabling the integrated graphics from the device manager.

Here is a Win x64 sgminer I compiled from djm34's updated git source:

https://mega.co.nz/#!gAFXyJKB!Zudke2WSrmHfhcXiG-urMqWurY874FFOJ43nRcuB5u8

I get

GPU 0 AMD Radeon R9 200 Series hardware monitor enabled

1 GPU device max detected


EDIT: Same as your exanple bat

I tried yours and the miner goes to the pause screen but blank.

The example.bat and conf is a generic one from the source. You should use your own configuration file or string. Here is the one I use. I get 7.6 KH/s on a HD7850:

Code:

{
"pools" : [
	    {
                    "name" : "pool-1",
		    "url" : "x",
		    "user" : "username",
		    "pass" : "password"
	    }
],
"intensity" : "16",
"worksize" : "12",
"algorithm" : "pluck",
"gpu-engine" : "1210",
"gpu-memclock" : "1500",
"gpu-threads" : "1",
"thread-concurrency" : "8192",
"lookup-gap" : "2",
"vectors" : "1",
"shaders" : "0",
"gpu-fan" : "100",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "88",
"temp-overheat" : "85",
"temp-target" : "75",
"temp-hysteresis" : "3",
"api-mcast-port" : "4028",
"api-port" : "4028",
"api-allow" : "W:127.0.0.1,W:192.168.0.1/14",
"tcp-keepalive" : "30",
"auto-fan" : true,
"gpu-dyninterval": "7",
"gpu-platform" : "0",
"hotplug" : "0",
"log" : "5",
"failover-only" : true,
"no-pool-disable" : true,
"queue" : "0",
"expiry" : "1",
"scan-time" : "1",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

[YesOrNo]

new version, seems there is no hw errors anymore

http://ge.tt/88LXuwA2/v/0?c

When I open sgminer I got error libcurl.dll is missing
How to fix that ?

[Nthused]

new version, seems there is no hw errors anymore

http://ge.tt/88LXuwA2/v/0?c

When I open sgminer I got error libcurl.dll is missing
How to fix that ?

Download this version and copy the required files over.

http://sup.hardcoreminers.com/amdbin.zip

[JuanHungLo]

new version, seems there is no hw errors anymore

http://ge.tt/88LXuwA2/v/0?c

When I open sgminer I got error libcurl.dll is missing
How to fix that ?

what I had to do was get all the .dll files from http://sup.hardcoreminers.com/amdbin.zip.  Copy them to my /windows/syswow64 folder.  Then it worked.

[earlz]

Hey everyone. Just wanted to give some general updates:

1. We now have a AMD GPU miner (in case you missed the 10 pages of posts). It's listed in the OP
2. I've done some updates to the wallet on github. The Windows installer now has proper theming, copyright notices include Supcoin, and the wallet now includes some optimizations for checking the blockhash more quickly.
3. I'm kicking around putting something in Supcoin that was originally destined for "my real coin". Primarily because it has a lot of variables and could potentially not work out like I expect it would. I want my real coin to be perfect because of a number of other features, so I'm strongly considering implementing this bit in Supcoin so that we can test it and see how it works. I won't go into details just yet, but it would definitely be a hard-fork. When I get a good design document written up for it and decide for sure that I'll be implementing it, I'll post an RFC and such to get the communities input.
4. Continue spreading the hash! We got a fair bit spread out and you should continue trying to ensure we have a well decentralized network!
5. Also stop by #supcoin on Freenode IRC and say sup! We have a tip bot and a good active community in there.