eldentyrell
Donator
Legendary
Offline
Activity: 980
Merit: 1004
felonious vagrancy, personified
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2012, 09:16:09 PM |
|
Jalapeno is going to need a wall wart mystery solved?
No, they explicitly said it was "USB powered". What you describe is "wall wart powered".
|
The printing press heralded the end of the Dark Ages and made the Enlightenment possible, but it took another three centuries before any country managed to put freedom of the press beyond the reach of legislators. So it may take a while before cryptocurrencies are free of the AML-NSA-KYC surveillance plague.
|
|
|
Coinoisseur
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2012, 09:27:23 PM |
|
I see, but even so implementing this research core in any form at a higher MHz target and larger die (more SHA units) would be cutting edge R&D especially with 28nm which even major companies are supply constrained on. What I meant was that the processes are mature. As long as you have a good designer, you aren't going to have any issue getting them fabbed. Thus my comment about whether or not it was "experimental".
|
|
|
|
MrTeal
Legendary
Offline
Activity: 1274
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2012, 09:45:37 PM |
|
If BFL is producing a full custom chip on a 32nm node I will liquify my hat in a blender and eat it. I could see 65nm, but anything lower would be a stretch. AMD and NVIDIA just left the 40nm node this year, and AMD and GloFo is still producing their CPUs on 32nm.
|
|
|
|
rjk
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 448
Merit: 250
1ngldh
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2012, 09:48:01 PM |
|
If BFL is producing a full custom chip on a 32nm node I will liquify my hat in a blender and eat it. I could see 65nm, but anything lower would be a stretch. AMD and NVIDIA just left the 40nm node this year, and AMD and GloFo is still producing their CPUs on 32nm.
Quoted for the lulz, even though I agree.
|
|
|
|
Syke
Legendary
Offline
Activity: 3878
Merit: 1193
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 27, 2012, 01:47:07 AM |
|
If BFL is producing a full custom chip on a 32nm node I will liquify my hat in a blender and eat it. I could see 65nm, but anything lower would be a stretch. AMD and NVIDIA just left the 40nm node this year, and AMD and GloFo is still producing their CPUs on 32nm.
BFL is "a market leader in microprocessor design", so they're clearly on par with AMD and Nvidia. I expect BFL will use 28nm.
|
Buy & Hold
|
|
|
mrb (OP)
Legendary
Offline
Activity: 1512
Merit: 1028
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 27, 2012, 03:18:22 AM Last edit: July 27, 2012, 03:28:39 AM by mrb |
|
Blah, BFL is talking about ~1750MH/Joule ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Jalapeno, USB device 3.5GH/s @ 2W from USB ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I think you need to go the other way start at what a US based 20 AMP 120V power plug could supply and work backwards using the 1 THash box. 15 AMPs * 120V == 1800 watts, 80% eff would give 1,440 watts available. ~695MH / Watt 1440W is a good assumption! This number matches almost exactly my OP which estimates the Jalapeno at 700 Mh/Joule by using 2 USB plugs for power. This 700 Mh/Joule number makes so much sense that it has become my best bet as to what the SC product line will produce. 700 Mh/Joule is even doable at merely 45nm per my OP. - Jalapeno SC: 5W via 2 USB plugs, 3.5 Ghash/s -> 700 Mhash/J
- Single SC: 57W, 40 Ghash/s -> 700 Mhash/J
- Mini Rig SC: 1440W, 1 Thash/s -> 700 Mhash/J
|
|
|
|
mrb (OP)
Legendary
Offline
Activity: 1512
Merit: 1028
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 27, 2012, 03:24:42 AM |
|
28nm theoretical Mh/W have been tossed around. Very rosy to think BFL has a VC source willing to pony up 10s of millions up front for that kind of chip development.
BFL's claims are plausible at 45nm, not 28nm. See post above.
|
|
|
|
mrb (OP)
Legendary
Offline
Activity: 1512
Merit: 1028
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 27, 2012, 03:32:21 AM |
|
So you should add to the question the minimum hashrate for a chip. But you don't know yet how many chips BFL is using in the new products.
Best guess: 50 chips of 20 Ghash/s each in the Mini Rig 2 chips of 20 Ghash/s each in the Single 1 "small" chip of 3.5 Ghash/s in the Jalapeno which has roughly 1/6th the die size (therefore 1/6th the performance) of the other chips
|
|
|
|
lame.duck
Legendary
Offline
Activity: 1270
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 27, 2012, 08:01:37 AM |
|
Best guess: 50 chips of 20 Ghash/s each in the Mini Rig 2 chips of 20 Ghash/s each in the Single 1 "small" chip of 3.5 Ghash/s in the Jalapeno which has roughly 1/6th the die size (therefore 1/6th the performance) of the other chips
Wouldn't this require 2 separate mask sets etc. which would produce 2 times NRE cost?
|
|
|
|
Coinoisseur
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 27, 2012, 10:37:43 AM |
|
It's plausible they will achieve perfect MHz, die scaling, and process shrinking improvements on a university research design (Published in March of this year no less)? That their identity-less VC backer will pony up the money to develop a full ASIC design on 45nm. We're talking R&D on 45nm, multiple wafer tests would be expected. Oh yeah this is plausible... 28nm theoretical Mh/W have been tossed around. Very rosy to think BFL has a VC source willing to pony up 10s of millions up front for that kind of chip development.
BFL's claims are plausible at 45nm, not 28nm. See post above.
|
|
|
|
SgtSpike
Legendary
Offline
Activity: 1400
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 27, 2012, 06:11:21 PM |
|
It's plausible they will achieve perfect MHz, die scaling, and process shrinking improvements on a university research design (Published in March of this year no less)? That their identity-less VC backer will pony up the money to develop a full ASIC design on 45nm. We're talking R&D on 45nm, multiple wafer tests would be expected. Oh yeah this is plausible... 28nm theoretical Mh/W have been tossed around. Very rosy to think BFL has a VC source willing to pony up 10s of millions up front for that kind of chip development.
BFL's claims are plausible at 45nm, not 28nm. See post above. The university design is likely imperfect. I bet engineers with years of experience can make it happen with even greater efficiency. And yeah, you can bet your bottom that any VC with any sort of investment fortitude would be willing to put down whatever dollars are required to finish this after seeing BFL take in millions of dollars without even having a product to show for it yet.
|
|
|
|
MrTeal
Legendary
Offline
Activity: 1274
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 27, 2012, 06:37:59 PM |
|
It's plausible they will achieve perfect MHz, die scaling, and process shrinking improvements on a university research design (Published in March of this year no less)? That their identity-less VC backer will pony up the money to develop a full ASIC design on 45nm. We're talking R&D on 45nm, multiple wafer tests would be expected. Oh yeah this is plausible... 28nm theoretical Mh/W have been tossed around. Very rosy to think BFL has a VC source willing to pony up 10s of millions up front for that kind of chip development.
BFL's claims are plausible at 45nm, not 28nm. See post above. The university design is likely imperfect. I bet engineers with years of experience can make it happen with even greater efficiency. And yeah, you can bet your bottom that any VC with any sort of investment fortitude would be willing to put down whatever dollars are required to finish this after seeing BFL take in millions of dollars without even having a product to show for it yet. Source?
|
|
|
|
Lethos
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 27, 2012, 09:38:00 PM |
|
I really think many are over estimating what a 45nm ASIC is capable of. It certainly won't do what many are suggesting aka BFL stated numbers. A 22nm or at a push a 28nm might, but it will massively depend on their design which is far from perfect. All the FPGA's on the market including BFL's still have not reached their ceiling limit, so I don't expect them to be pushing an ASIC to it's limit either.
I don't say this flippantly, my dad (him far more than I) and I, have done a lot of encryption based projects, involving FPGA's and ASIC's. He has always focused on hardware, myself more software based. ASIC are fantastic chips if you can afford the upstart costs, however FPGA's have advanced to a point that they are fast enough that they are being used as the first choice, instead of ASIC.
The original poster brings up accurate statistics, I'm sure they can make a USB powered ASIC, I've used both FPGA's and ASIC that run on those sort of wattage before, they can do a lot, especially the ASIC, but they can't do a double-SHA-256 as frequently as they say. I estimate the 2.5 watt (coffee warmer) will likely only do 1000 Mhash/s, A long way off their 3500 Mhash/s Statement.
|
|
|
|
mrb (OP)
Legendary
Offline
Activity: 1512
Merit: 1028
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2012, 08:35:52 AM Last edit: July 28, 2012, 09:00:50 AM by mrb |
|
Best guess: 50 chips of 20 Ghash/s each in the Mini Rig 2 chips of 20 Ghash/s each in the Single 1 "small" chip of 3.5 Ghash/s in the Jalapeno which has roughly 1/6th the die size (therefore 1/6th the performance) of the other chips
Wouldn't this require 2 separate mask sets etc. which would produce 2 times NRE cost? Do you think that Intel having, say, 5 different combinations of core counts, cache size, etc for their Sandy Bridge processors, mean that they incurred 5x the NRE costs to develop them? No. They take pre-designed logic blocks (cores, cache, etc) and can mix and match them relatively easily to produce a die with specific characteristics. The few cases where different SKUs are built on the same design (eg. a 3-core CPU made from a 4-core die) allow processor manufacturers to keep a stock of the same die, and "brand" them on-the-fly to match market demand (so that they don't get stuck with unsold 4-core inventory and production capacity when the markets buy 3-core). For the same reason, BFL designing 2 different dies will not double their NRE cost. It makes sense for a Bitcoin ASIC to be made of the same hashing logic block duplicated dozens/hundreds of times across the die (see the "sea-of-tiny hashers" design made by bitfury -- the same applies to FPGAs). Therefore there is almost zero engineering effort and cost in taking a working die with, say, 60 hashing blocks, and deciding to produce a smaller die with only 10 hashing blocks.
|
|
|
|
mrb (OP)
Legendary
Offline
Activity: 1512
Merit: 1028
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2012, 08:55:36 AM |
|
I really think many are over estimating what a 45nm ASIC is capable of.
This is math. Power consumption varies with the square of the feature size. So when comparing a chip designed at 45nm to a 130nm version of it running at the same frequency and same voltage, there should be a 8x better power efficiency: (130/45)**2 = 8.3 Ask your dad, he will tell you that for 2 identical designs, power consumption will vary proportionally to the transistor junction area.
|
|
|
|
Coinoisseur
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2012, 12:17:23 PM |
|
It's not anywhere near double but the costs of masking and producing are still there, unless they plan on disabling lots and lots of blocks off one larger die (this is what Intel and AMD do for some of their chips). Best guess: 50 chips of 20 Ghash/s each in the Mini Rig 2 chips of 20 Ghash/s each in the Single 1 "small" chip of 3.5 Ghash/s in the Jalapeno which has roughly 1/6th the die size (therefore 1/6th the performance) of the other chips
Wouldn't this require 2 separate mask sets etc. which would produce 2 times NRE cost? Do you think that Intel having, say, 5 different combinations of core counts, cache size, etc for their Sandy Bridge processors, mean that they incurred 5x the NRE costs to develop them? No. They take pre-designed logic blocks (cores, cache, etc) and can mix and match them relatively easily to produce a die with specific characteristics. The few cases where different SKUs are built on the same design (eg. a 3-core CPU made from a 4-core die) allow processor manufacturers to keep a stock of the same die, and "brand" them on-the-fly to match market demand (so that they don't get stuck with unsold 4-core inventory and production capacity when the markets buy 3-core). For the same reason, BFL designing 2 different dies will not double their NRE cost. It makes sense for a Bitcoin ASIC to be made of the same hashing logic block duplicated dozens/hundreds of times across the die (see the "sea-of-tiny hashers" design made by bitfury -- the same applies to FPGAs). Therefore there is almost zero engineering effort and cost in taking a working die with, say, 60 hashing blocks, and deciding to produce a smaller die with only 10 hashing blocks.
|
|
|
|
Lethos
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2012, 01:51:50 PM |
|
I really think many are over estimating what a 45nm ASIC is capable of.
This is math. Power consumption varies with the square of the feature size. So when comparing a chip designed at 45nm to a 130nm version of it running at the same frequency and same voltage, there should be a 8x better power efficiency: (130/45)**2 = 8.3 Ask your dad, he will tell you that for 2 identical designs, power consumption will vary proportionally to the transistor junction area. I'm aware of the mathematics, the math of scaling does work like that. But it's not the only math that effects the final outcome. However you have also made a convenient assumption that it will utilise two usb ports to power it, allowing it to have twice as much power, for a max of 5 watts. That is abit of a stretch to assume that and why the math to me does not add up for it to do 3.5 Gh/s at 2.5W and is what I stated. 2.5W is also something an ASIC could easily run off, it would not need to rely on 5W to work fully. 5W might allow it to go that bit higher, but I still think it be off by a bit of course. Their FPGA to ASIC conversion and how efficiently they move that over will matter the most, since few are doing the same sort of double hashing, so it's not like they can just copy or modify the design of someone elses.
|
|
|
|
Coinoisseur
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2012, 01:57:38 PM |
|
Power doesn't usually turn out ideally on these die shrinks though. Otherwise instead of Atom cpus Intel would have a sub Watt Pentium 3 1GHz die at 32nm.
|
|
|
|
Gomeler
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2012, 10:28:28 PM |
|
Power doesn't usually turn out ideally on these die shrinks though. Otherwise instead of Atom cpus Intel would have a sub Watt Pentium 3 1GHz die at 32nm.
I love when I get to dust off the cobwebs.. Pentium M was the mobile processor that all current out-of-order Intel desktop/server chips are based off of. Pentium M was a Pentium 3 core with some spruced up I/O. Pentium M led to Core Duo(yonah), which were holywtf awesome at the time, which then lead to Core 2 Duo(conroe) which then lead to the 45nm shrink(penryn). That then lead to the architecture improvement that was nehalem, which lead to the 32nm shrink that was westmere(with the awkward clarkdale phase), which lead to the architecture improvement that was sandybridge, and then the 22nm shrink that is ivy bridge. If Intel wanted, they could sell a sub-watt single core Ivy Bridge chip. But instead they chose to butcher their core, remove the out of order components, and trick the market in to needing a second core that costs them next to nothing to manufacture. You have to give them credit as they effectively established a tablet-like market with the netbooks based off early Atom processors.
|
|
|
|
mrb (OP)
Legendary
Offline
Activity: 1512
Merit: 1028
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2012, 10:57:19 PM |
|
Power doesn't usually turn out ideally on these die shrinks though. Otherwise instead of Atom cpus Intel would have a sub Watt Pentium 3 1GHz die at 32nm.
...and they do: 0.65W Atom Z500 with twice the cache than the Pentium III, more instructions supported (SSE2, SSE3), twice the threads, not 1GHz but close: 800MHz (because it is not 32nm, but 45nm): http://ark.intel.com/products/35472Or look at this one: 1.4W Atom Z600 with twice the cache, SSE2, SSE3, twice the threads, and 1.2GHz: http://ark.intel.com/products/49656What do you think Atom CPUs are? They are built upon the Pentium III/M design. Yeah they don't support OOO execution for whatever reason (artificial market segmentation between Atom and higher-end CPUs, or making TDP room for supporting things Intel deemed more important such as 512kB cache, SSE2, SSE3, etc), but they pretty much prove that a sub-Watt (at 32nm) or ~1.5W (at 45nm) Pentium III core is possible.
|
|
|
|
|